Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Sorry, I don't understand, can you explain?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I guess we want you to share your shell32.exe since apparently yours does not have the timebomb.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

ํYes Sir, i have the timebomb

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Easy for me to read your mind, we the same surname- 007. We are family.=D>

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I already posted my QVGA SYS a few pages back, I haven't tested the timebomb issue though.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Hey guys!! I just flashed my Cooked WM6.5 Build 21500 and its better then b4 doesnt seem to be a fake one :D

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Great news, especially considering that you almost whacked my head off:mrgreen:

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

well, here's some cleaned ppckitchen stuff for ya. Thanks to da_g, used his sys, with the timebomb fix, reduced it to a common, and just pointed at 202 dpi

http://dan-vogue-titan.ppckitchen.or...PPCKitchen.rar
http://dan-vogue-titan.ppckitchen.org/21500_xips.rar

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Can any1 tell me what are the indications that TimeBomb is active??

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

set the date into the future, and see if it fails to load

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

dan, can you post a Titan ROM for 21500 as you did with 21202?

Thanks

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

sure, here. this is a titan rom
http://dan-vogue-titan.ppckitchen.org/RUU_signed.rar

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I'm at work so can't download now; are these device specific? If so, which one(s)? thanks!

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Gracias Senor! I just learned how to implicate it into PPCKitchen. So simple, i feel dumb](*,)](*,)

:-D

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

the xip's are all device specific, but I have one for every device ppck supports, and a couple extra, and in ther all rar is sys common, and the 202 dpi's sys is not device specific

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

hey dan .. this might be a stupid questiion.... but which xip do i use for the sprint TP.... the Herman one or Raphael... i heard before the sprint tp being cal;led the herman, but it is also called it Raphael?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

use herman for cdma (sprint) touch pro's

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

is build 3111111 out yet today?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

that will be out tomorrow

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

ooo just checking. i hear good thngs about that one lol

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Nope, today's build is 69omgwftlol. Updated, ported, and ready for tha Poopar!

(Sorry, fellow anon here had to report in)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Okay downloaded the xips you posted earlier, are they affected too with the timebomb plague or am I okay with them?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

timebomb's are only in the sys, it's fixed in the sys I posted

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

SWEEEEET!!!! Its so awesome they had to add 2 more digits to the end of the build number to symbolize its awesomeness! Its gonna be... LEGENDARY!

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

will add fricken laser beams and flux capacitor

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

big thanks to calc and da_G (in addition to everyone else) :thumbright:

removing those debug sections seems to have definitely sped things up!

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I'm loving the 21500 build. Much faster, only wish that i could port the xip.

I'm stuck in the 2nd boot screen, only when i made my own ROM w/ PPCKitchen

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I have ported 21500 XIP for Hermes, here it is :)
Hey... honeycomb works, as never before :D and 25MB of free RAM on Hermes, without any tweaks yet.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I already ported the xip...

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

did it lighten and then darkened the screen? If yes, then you have your xip ported well. Then check in temp\dump if all the packages are included....

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

LMAO!!

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I am having almost the same issue. I made my own kitchen with the QVGQ SYS posted yesterday, used your Titan.xip, but I get stuck at the second boot screen. My radio light comes on and starts blinking, but thats it. (so drivers are good, I assume) I created some new kitchen config files for your base and cooked a ROM, same problem. After a while the screen just goes black. I also noticed that I STILL don't have the nueKernel showing up on the initial post screen. I made some config changes and am flashing it now. I will see what happens in 5 mins. I did verify that the Titan_21500.bin was in the ROM temp folder this time, so we will see...

Update:
Yup, that was it. It musta been cooking the wrong xip in...

Live and learn.](*,)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I could not get a rom to boot using the stuff posted here before, I ended up taking da_g's sys and cleaning it up for ppckitchen use, no problems now

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Check back on my post, I updated it. My problem was the xip.

Now I wonder if my own kitchen would have run fine after finding my config file mishap.

Update: uh oh, somethings not right still. I have no Titanium Home screen. Dan, I see the BronzeNonEA is missing Titanium configs for QVGA devices. Could this be my issue?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

glad to hear we are all getting sorted out

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

The home screen: happened to me before.

LMK whats up, I'm getting another SYS and trying it out. I'm nowhere near experienced with Straight up ROM building, except through PPCKitchen.

P.S. - I deleted that post about the same bootscreen issue, I had saw that Dan-htc-touch had already replied before i posted. lol

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Dan, the 21500 common BronzeNonEA is missing the QVGA cpr files. I manually put them in the windows folder and Titanium is fixed. Maybe you want to update the kitchen you posted? I will manually update my copy, but FYI.

BTW, thx for all the goodies:headbang:

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

ah, sorry about that, had some in my tweaks oem from way back, did not even think of that

http://dan-vogue-titan.ppckitchen.org/BronzeNonEA.rar

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

NP. Speaking of which, are yours updated with larger fonts and re-arranged? I accidentally overwrote the wrong ones yesterday, and only have 240x320 with larger fonts. When I slide out, the date fonts shrink and the carrier is positioned below the clock (as opposed to above in 240x320).

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

nah, all mine are carrier below now, it put all connection info on bottom line, including wifi, so makes more sense that way