Step by Step tutorial for unlocking your device and cooking your own ROM!!!

[GaMedic]

I will now outline the steps you can use to unlock your phone.

This unlocks the phone so that you can put a different Radio (GPS enabled) and a different ROM on it. You can use Olipro 2.40 or nuespl 2.47 to unlock your Titan device.
To run Olipro 2.40 you need to plug the USB to your PC and PPC and run the file from your desktop. The phone screen will change to a rainbow colored screen (bootloader mode) and should read TITA100 MFG, SPL-2.40. Olipro, CPLD-9. Once you have done that you will be ready to install a GPS enabled Radio. The important thing is to be careful which Olipro spl you run. DO NOT USE THE OLIPRO 1.20
spl. The 1.20 and 2.40 are posted in the same thread and many people have chosen the wrong one inadvertently. (By the way the links are directly to the file you should need. This is the link to the thread in case you need direction from there.)
Your other unlock option is nueSPL 2.47 (Thread link). The nice thing about nuespl 2.47 is that it can be ran using an SD card. The SD method instructions are fairly simple. You download the nuespl 2.47 to your PC. Take an SD card, must be 2gb or less in size, and place it in a card reader. On your PC navigate to the card reader through My Computer. Right click on the drive containing the card reader and select Format from the menu. Select fat32 as the format setting. Once the card is formatted you take the 2.47 spl you downloaded and place it on the card. It cannot be inside a folder it must be on the root of the storage card. Right click on the file and select rename. Rename the file to TITAIMG.nbh. Once the file is renamed place the SD card into the device and put the phone into bootloader mode (Power, camera, reset all pressed at the same time for about 2 seconds) and follow the prompts on the screen to update the spl. After the screen says updated or update complete, press the reset button. While the phone is resetting place the phone back in bootloader mode.

Edit : This information was sent to me by another user, so I am adding it to the Tutorial.
When you unRAR nueSPL, you don't actually rename it and place it in the root. You run the exe from within the device and it automatically checks to make sure all the other requirements are in place, then creates the TITAIMG.nbh file for you in the right location and walks you through putting the phone into the bootloader.


If you get stuck in the bootloader screen at any time (when you reset it goes to bootloader screen and will not boot to splash screen) just go to this post and run the exit-bl. in that thread.

Legend: Topics, Threads at ppcgeeks, Files you can download, Screeshots, Links to web sites, Important information, FTP folder, Edits.

[chevyforlife]

Once the file is renamed place the SD card into the device and put the phone into bootloader mode (Power, camera, reset all pressed at the same time for about 2 seconds) and follow the prompts on the screen to update the spl. After the screen says updated or update complete, press the reset button. While the phone is resetting place the phone back in bootloader mode.


If you get stuck in the bootloader screen at any time (when you reset it goes to bootloader screen and will not boot to splash screen) just go to this post and run the exit-bl. in that thread.

[drewden123]

yes, i got past the update and update complete thing. when i hit reset i put the phone back in bootloader and it went back to the update screen. so whenever i reset without going into bootloader it gets stuck

[dopdahtc]

Originally Posted by GaMedic

I will now outline the steps you can use to unlock your phone.

This unlocks the phone so that you can put a different Radio (GPS enabled) and a different ROM on it. You can use Olipro 2.40 or nuespl 2.47 to unlock your Titan device.
..............

Edit : This information was sent to me by another user, so I am adding it to the Tutorial.
When you unRAR nueSPL, you don't actually rename it and place it in the root. You run the exe from within the device and it automatically checks to make sure all the other requirements are in place, then creates the TITAIMG.nbh file for you in the right location and walks you through putting the phone into the bootloader.

Could you plz tell me whether I have to unlock the phone before I update the low version to a higher one? As mine is a Spanish language phone with the RADIO version 1.67, I really wanna update it. But last time when I did that, the HTC6800 turned to be a brick. This time I dare not update the SPL again when I start the BOOTLOADER......

[puff]

Originally Posted by dopdahtc

Could you plz tell me whether I have to unlock the phone before I update the low version to a higher one? As mine is a Spanish language phone with the RADIO version 1.67, I really wanna update it. But last time when I did that, the HTC6800 turned to be a brick. This time I dare not update the SPL again when I start the BOOTLOADER......

well that's kinda tricky. depending on your carrier if you can flash a stock GPS ROM (look here for stock ROMs) with a full ship exe ROM upgrade (certain carriers only) you can upgrade the radio/bootloader/OS (excluding bootloader if you've unlocked as it has overwrite protection) without unlocking - now with a dump however, you may need to unlock first. Of course there's another method, would be to unlock using Olipro 2.40 (as NueSPL requires GPS 3.X ROM) and then flash GPS radio followed by flashing GPS OS Rom. The easiest method being to flash via SD Card (excluding Olipro 2.40 which must be done via usb cable/RUU)

[cat3rn]

Originally Posted by GaMedic

I will now outline the steps you can use to unlock your phone.
This unlocks the phone so that you can put a different Radio (GPS enabled) and a different ROM on it. You can use Olipro 2.40 or nuespl 2.47 to unlock your Titan device.

Will this work or has anyone tried this on a Verizon XV6850?

[drewcam888]

Originally Posted by cat3rn

Will this work or has anyone tried this on a Verizon XV6850?

No look in the touch pro section.