Emergency Xv6800 flashed to 3.39 radio - Page 2

Jeep14 · #11 (**permalink**) 05-12-2008, 02:17 PM

no luck. I just tried entering in the AKey again with no luck...would everything go back to normal if I flashed everything back to stock?

justpctech · #12 (**permalink**) 05-12-2008, 02:29 PM

hmm, weird. ya flashing back to stock might be a good idea just to make sure all is good there. then you could try again.

**Getitnowmarketing** · #13 (**permalink**) 05-12-2008, 03:43 PM

Its the PRI verison not PRL. Check under ##778 vzw one for a 6800 is 1.35.002 and eri should be version 4 check with #4357. I have two moguls on vzw w/ roam triangle and haven't figured out how to load a new one (ship exe. rom wont even do it tried on a 6700 and tried stock xv6800 just dont have a ship .exe yet). Once a VZW PRI is on there you can manually load an eri with ## eri. Hopefully someone will know how to change the PRI on this phone. The Perferred Roaming Index is what displays the carrier's ID.

Jeep14 · #14 (**permalink**) 05-12-2008, 04:34 PM

My PRI is 2.03_003

Doesn't look right...and no way of changing. I really need this fixed.

NexVision · #15 (**permalink**) 05-12-2008, 07:04 PM

Your all way off base it has nothing to do with the PRI or the a-key it has to do with having improper info in your epst. SID/ NID and what not. The easiest way to fix it roll all the back and flash a full Verizon stock rom including radio and let the customizations run. The other method would to get a copy of CDMA workshop and edit your blown NAM settings. U can try a couple edits in EPST by going ##778 send verify everything with a working setup. Just to stop anyone saying no its the PRI your PRI is upated upon doing a *228 option 2 and u said this was successful so that aint it have you tried a *22890?

If you really have no idea how to do any of this u have 2 options call WDTS and get them to send a replacement or send me the phone and I can fix it.

If you wanna jump in the chat I have no problem troubleshooting and and trying to get it going for ya.

**Noir** · #16 (**permalink**) 05-12-2008, 08:11 PM

We're still off base with some of the comments here, because I just went through this. If you are on a verizon and you let sprint customizations run, that's a no no. And I had a hodge podge phone (verizon rom sprint customization on a verizon phone)
So what I did was
1. I foolishly ran titan relocker and downgraded back to the verizon rom
what this did was set me back with my verizon settings just one problem, I had no data connection. So I was lost without a cause I went to google and I came up with a simple answer
2. call verizon wireless and say that you updated PRL and I keep getting error 11 (which if you do what I instructed, you may or may not. Some have some have not so just in case you don't have a data connection) is it possible to perform a DMU? After 15 minutes everything worked. Verizon fixed it no refurbs, no nada. Hope this helps

NexVision · #17 (**permalink**) 05-13-2008, 10:10 AM

Quote:

Originally Posted by Noir

We're still off base with some of the comments here, because I just went through this. If you are on a verizon and you let sprint customizations run, that's a no no. And I had a hodge podge phone (verizon rom sprint customization on a verizon phone)
So what I did was
1. I foolishly ran titan relocker and downgraded back to the verizon rom
what this did was set me back with my verizon settings just one problem, I had no data connection. So I was lost without a cause I went to google and I came up with a simple answer
2. call verizon wireless and say that you updated PRL and I keep getting error 11 (which if you do what I instructed, you may or may not. Some have some have not so just in case you don't have a data connection) is it possible to perform a DMU? After 15 minutes everything worked. Verizon fixed it no refurbs, no nada. Hope this helps

Might wanna try reading a little better he is not having a problem connecting to data. He is having a problem with roaming.

The data connection is simple you add a new connection

Name = Anything
Number = #777
UserName = your10digitnumber@vzw3g.com
Password = vzw

Leave domain blank.

Jeep14 · #18 (**permalink**) 05-13-2008, 11:37 AM

Biggest Problem now is I answered a phone call last night and the phone died completely. I Have no power to it and sometimes (sometimes not) when the phone is plugged in it has no power but the red LED will glow...Nex, any idea how to fix that?

NexVision · #19 (**permalink**) 05-13-2008, 11:52 AM

Quote:

Originally Posted by Jeep14

Biggest Problem now is I answered a phone call last night and the phone died completely. I Have no power to it and sometimes (sometimes not) when the phone is plugged in it has no power but the red LED will glow...Nex, any idea how to fix that?

Pull the battery for 3 minutes. put the battery back in and plug it in and dont touch if for 15 minutes then pick it up and try to power it on.

**clockcycle** · #20 (**permalink**) 05-13-2008, 12:01 PM

Quote:

Originally Posted by Jeep14

My PRI is 2.03_003

Doesn't look right...and no way of changing. I really need this fixed.

2.03_003 is the Sprint Leaked ROM PPST.EXE update of the PRI.

Find the original VZW ROM that includes it's radio/PRI/PRL update.

You may have to flash the ROM, let the customizations run, and then run it's PPST.EXE after it reboots. To get it to update your PRI back.

As far as the PRL, since you can do a *228 option 2, you shouldn't have a problem with it. If it's still the wrong version PRL, download it from the linked site here and reload it using ##775 talk or ##778 talk and go into the PRL part and do an update.

Hope that helps,

-CC

P.S. Roaming set to home only?