I think I bricked my Titan

[gguruusa]

Refer to post #9 in this thread.

[bakntyme]

Originally Posted by head honch

Ok so my 6800 came with the latest radio 3.35 installed so all i had to do was run the unlocker which i did, but my phone kept reseting after tapping the screen.

so i figured that possibly loading the no2chem 6.1 rom would fix it and it worked great until i unplugged the phone then it went back to rebooting so this morning i woke up this morning and i tried to go back to the stock rom and while it was installing my computer froze while it was at 11%

....so now my phone just stays frozen at the Sprint screen and it now says 'No Radio' near the bottom of the screen is there anything i can do to salvage my phone? is there anyway to get to the tricolor screen so i can run the rom again....this sucks i literally just got my Mogul last Wednesday can anyone help me out....Thanks in advance

On the tri-color screen, what numbers do you see? It sounds like you might have used the wrong unlocker and you might have the 1.20 bootloader. You need the Olipro 2.40 to flash 3.xx ROMs. If you DO see 1.20 on the tri-color screen, you must flash a 2.xx OEM ROM, then install the Olipro 2.40 hard-SPL bootloader, then you can reflash the 3.35 OEM ROM and follow that with a custom ROM if you want to. You can flash an OEM ROM package from the bootloader (tri-color) screen, just ignore the wording about Activesync.

edit: to get into the bootloader (tri-color screen), hold down the Power and Camera buttons while pressing the stylus in to the reset hole until you see the tri-color screen.

[head honch]

Originally Posted by bakntyme

On the tri-color screen, what numbers do you see? It sounds like you might have used the wrong unlocker and you might have the 1.20 bootloader. You need the Olipro 2.40 to flash 3.xx ROMs. If you DO see 1.20 on the tri-color screen, you must flash a 2.xx OEM ROM, then install the Olipro 2.40 hard-SPL bootloader, then you can reflash the 3.35 OEM ROM and follow that with a custom ROM if you want to. You can flash an OEM ROM package from the bootloader (tri-color) screen, just ignore the wording about Activesync.

edit: to get into the bootloader (tri-color screen), hold down the Power and Camera buttons while pressing the stylus in to the reset hole until you see the tri-color screen.

So far i have the Olipro 2.41 bootloader...last nite when i finally got the OS to install and i had a phone again...i tried loading the 5060 kitchen and it wouldn't get past the boot screen although it installed correctly. Is this becuz i should run the Sprint 3.35 ROM first and then the kitchen or does it matter?

[bakntyme]

Originally Posted by head honch

So far i have the Olipro 2.41 bootloader...last nite when i finally got the OS to install and i had a phone again...i tried loading the 5060 kitchen and it wouldn't get past the boot screen although it installed correctly. Is this becuz i should run the Sprint 3.35 ROM first and then the kitchen or does it matter?

Since your phone said "No Radio", you need to install the Sprint OEM 3.35 ROM package to get the 3.35 radio installed, then you can flash a custom ROM over that.

[O'Neil Mitchell]

I want to join the club, I too have bricked my Titan. Its stuck in the tri colour. The display reads TITA100 SPL-1.20.0lipro

[Spencer_Moore]

you need bootloader 2.40 olipro get the right bootloader and try flashing again

[nick aguas]

Originally Posted by O'Neil Mitchell

I want to join the club, I too have bricked my Titan. Its stuck in the tri colour. The display reads TITA100 SPL-1.20.0lipro

We need a 'Jump to Conclusions' mat emoticon. Just like Tom Smykowski's from Office Space.

olipro 1.20 is outdated and no longer used by any current ROM's. do a search on olipro 2.40.

[O'Neil Mitchell]

There is only one big problem, because the phone is in Boolloader mode. Active Sync won't start up, so olipro 2.40. won't run ( No Device Connected )

[OffUrRcker]

Your phone is completely fine. Worst case scenario, you need to flash an Oli 1.2 capable rom from a fat32 formated microsd card, which is very easy to do, just search. Also, I believe somebody built a new unlocker that is SD card compatible, for Oli's 2.4. Either way, your phone is in prime condition.

[tc32brat]

if all else fails call sprint tell them you want insurance(incase you don't have it) then remove battery, insert phone in microwave, and let it rip for 3 seconds. go to sprint and tell them it won't work.....get new phone