Titan Kitchen CE OS 5.2.19209 (Build 19209.1.0.2) aka 5060

[djviruss]

Originally Posted by x10guy

There are a couple of ways:
1. Use OEMizer (and make sure the program is NOT selected in the kitchen)
2. Use Tier AutoInstall
3. Or simply wait for the kitchen to be updated. Updates have been coming 1-2 weeks apart. With the New Sprint ROMs out, expect a major Kitchen update soon.

... there are probably other ways to do it...

Thanks for the quick answer..

[matcat]

Last night I flashed to 5060 build using the kitchen method, all worked well, but unfortunately I found a few issues, for one, ## codes did not work in dialer, and the biggest problem, IOTA refused to work in any fashion, all phone functions worked as far as phone calls in and out, showed EVDO status, etc, but just kept giving me 1012 errors. Tried quite a few ideas that I found around this forum and the web, but nothing worked, so I flashed it with the Black Pill rom, which I do not like as much as the 5060, BUT iota provisioned perfectly right away, plus ## codes work, although I do not like the dialer on black pill rom.

Any suggestions for trying 5060 again and getting iota to work?

[ScottL4619]

Ok, I searched the site and this thread, but didn't find anything similar. I just received a new mogul today as a replacement. I had it for about an hour and had it unlocked, new radio, and 5060 loaded. About 4 hours later, the keyboard backlight isn't working. Is it even remotely possible that this is software related. It worked after the ROM upgrade, and just went out suddenly. I really don't want to go back to the stock verizon ROM if it's a hardware malfunction. Thanks...

[Kishi]

So I think I followed the instructions as listed... Unlocked the phone with Olipro 2.40. Flashed the radio with the 3.35 download. Phone went to reboot after the flash.

Now it loads the splash screen:

P DCAAXAM-4350
R 3.35.04
D 2.09


then freezes.

Did I cook it or is there something else I can do? Hard-reset won't get it's attention, battery removal just gets me back to the same, freeze point.

Any help is appreciated.

[justpctech]

Originally Posted by Kishi

So I think I followed the instructions as listed... Unlocked the phone with Olipro 2.40. Flashed the radio with the 3.35 download. Phone went to reboot after the flash.

Now it loads the splash screen:

P DCAAXAM-4350
R 3.35.04
D 2.09

then freezes.
Did I cook it or is there something else I can do? Hard-reset won't get it's attention, battery removal just gets me back to the same, freeze point.
Any help is appreciated.

did you just flash radio? or OS too? looks like its got the right radio, but still the old OS on it, which explains why it wont boot. you need to flash a new 3.xx rom on it now.

[puff]

Originally Posted by Kishi

So I think I followed the instructions as listed... Unlocked the phone with Olipro 2.40. Flashed the radio with the 3.35 download. Phone went to reboot after the flash.

Now it loads the splash screen:

P DCAAXAM-4350
R 3.35.04
D 2.09


then freezes.

Did I cook it or is there something else I can do? Hard-reset won't get it's attention, battery removal just gets me back to the same, freeze point.

Any help is appreciated.

agree w/ justpctech
looks like you flashed just the radio
cook up a 3.XX rom, put your phone in bootloader and flash it

[Kishi]

The problem is that my computer won't see it because it locks up. I need to figure out how to get it past this state it is currently freezing in or figure out how to roll it back.

Still tinkering and reading, but I haven't seen another thread that looks similiar.

[puff]

Originally Posted by Kishi

The problem is that my computer won't see it because it locks up. I need to figure out how to get it past this state it is currently freezing in or figure out how to roll it back.

Still tinkering and reading, but I haven't seen another thread that looks similiar.

1. Forget about activesync and any instructions that tell you to check activesync
2. Press Cam+Power+Reset = Bootloader
3. Flash 3.XX r0m from RUU

[justpctech]

Originally Posted by Kishi

The problem is that my computer won't see it because it locks up. I need to figure out how to get it past this state it is currently freezing in or figure out how to roll it back.

Still tinkering and reading, but I haven't seen another thread that looks similiar.

when in bootloader mode, if it shows USB at the bottom when you plug sync cable into it, you should be able to flash then.

[Kishi]

Excellent -thanks everyone that did it.

I have the ROM loaded and it booted fine. It seems I lost the provisioning information though during the upgrade.

I went to the phone and dialed

##<MSL Number># and nothing happened.

I called Sprint to confirm the MSL number and what I had recorded was correct.

Any suggestions on what might be happening? Is the GUI blocking the code from the ROM or did I forget a piece/step somewhere?


AHH NVM - I see the Phone Codes Option now. I think that will fix me up.

Thanks for the support and time.