Re: nueLED - configure/customize your LEDs...
 

Darn. I might have to retract my success report for the Sprint Touch. Twice in the hour and a half I've had it installed, my phone has refused to turn on and I've had to reset it. In both cases, it was plugged in and left to sit alone for awhile. It probably entered sleep mode and it seems it continued on into coma mode. :)

Admittedly, I have seen this problem before I installed this. Maybe two times spread over the 2 months I've had this device. But the sudden increase right after I installed this seems suspicious. I'm not saying I'm sure it's the cause, but it's a clear correlation. I'll leave it on the device for now and see if it happens when the device is not plugged in. Let me know if you have any thoughts.

-Brian

Re: nueLED - configure/customize your LEDs...
 

Do me a favor and uninstall the the 1.3 version and try the 1.1 version I posted a couple posts back. Mine has frozen a couple of times and I am wondering if its something with 1.3. My freezing happened a couple of times and it was plugged into the charger each time.

Let me know how it works.

Re: nueLED - configure/customize your LEDs...
 

far as i knew this only for the mogul...Its in the titan area.

Re: nueLED - configure/customize your LEDs...
 

This should work for any HTC ppc. Its been confirmed to work on the HTC Kaiser.

Re: nueLED - configure/customize your LEDs...
 

i cant get the dll file to delete out of version 1.1. I have installed 1.3 uninstalled 1.3 and installed 1.1 and uninstalled 1.1 and nada any help??

Re: nueLED - configure/customize your LEDs...
 

Working great for me on the Mogul as installed in no2chems 6.1.5049 Rom

Re: nueLED - configure/customize your LEDs...
 

sweetness... btw stroths i had to hard reset to get rid of 1.1. lol them the breaks in modding.only good thing is im down to a 1hr 20 minutes to redo whole phone.lol im almost a pro at it now... ^_^

Re: nueLED - configure/customize your LEDs...
 

Nice job! I haven't tested this yet, but I was working on this same concept a while back. I gave up after experiencing lockups on stanby. I think it was happening on XXX_PowerDown, but I never investigated it fully. Let me know if you would like some help debugging it.

Re: nueLED - configure/customize your LEDs...
 

I cooked the OEM into a rom, and then i had lots of problems with it not waking from standby, but using the cab to install it worked fine.

Re: nueLED - configure/customize your LEDs...
 

hmm, i think the lockups i have are due to a memory leak in 1.3
LED_PowerDown just does a return; so not sure why that would cause a lockup unless im not handling something....

Re: nueLED - configure/customize your LEDs...
 

I've run your cleaner (I think...it didn't say anything) and installed 1.1. I'll report how it goes later tonight or tomorrow.

1.3's problems were not limited to when it was plugged in. The last few hours I had 3 freezes while unplugged. On one of them, it actually did turn on for a split second and then entered its coma. The other times it was already in the coma when I took it out of my pocket.

-Brian

Re: nueLED - configure/customize your LEDs...
 

maybe this is where everyones problems are?Im still on 48 just used stroths battery and led cab from no2chem that he made....

Re: nueLED - configure/customize your LEDs...
 

er... new version soon. fixes a lot and adds a LOT of neat new features.....

Re: nueLED - configure/customize your LEDs...
 

Cool. In the meantime, I had no problems with sleep-> coma tonight using 1.1.

-Brian

Re: nueLED - configure/customize your LEDs...
 

1.4 cabbed version updated

http://forum.ppcgeeks.com/showpost.p...8&postcount=20

Re: nueLED - configure/customize your LEDs...
 

hrm...my 1.1 won't uninstall...is that unusual? LOL. Any ideas? Can someone repost 1.1? Maybe I can reinstall and then uninstall it...

<EDIT> Ok...I found 1.1 posted a couple pages back. Excuse my blindness.
<EDIT2> Hrm...1.1 won't come off no matter what I do. Looks like I might have to hard reset as well. I can't seem to take it off the installed program list. HOWEVER, reinstalling 1.1 does seem to work...and it is usable so I guess I'll stick to that until ROM 5050 is out and I update ROMS again. So what was added to 1.4 that's new? (Disappointed I have to miss out on that...hehehe)

verkion

Re: nueLED - configure/customize your LEDs...
 

lots of new stuff. its amazing. 1.4 should also automatically clean your registry for you, so have it do that, then reinstall 1.4 to get all the settings back...

Re: nueLED - configure/customize your LEDs...
 

Will this let me disable the LEDs without disabling Vibrate? If so, is Vibrate treated just like another LED and if so what is it's code?

Re: nueLED - configure/customize your LEDs...
 

it will not affect the vibrate feature.
vibrate does not have an address, as it is controlled via another ioctl.
besides, im pretty sure you can disable vibrate through the registry.

Re: nueLED - configure/customize your LEDs...
 

Thanks!, That's great, I just know that all the programs in the past that I've tried that shut off the LEDs also killed vibration alerts. I needed the vibration notification, just not the LEDs. Any chance of putting a toggle mode into your program? Where you can have 2 choices? Example in a dark theater (or at night on my nightstand) I don't want the flashing lights, but normally I don't mind them?

Re: nueLED - configure/customize your LEDs...
 

not yet, on the roadmap for 1.5 =)

Re: nueLED - configure/customize your LEDs...
 

Just a status check...

no2chem, do we now have the ability to change the flashing frequency? And did you find the red LED address?

If no to the frequency question, do you have plans to try to include that feature?



You never cease to amaze me...

Re: nueLED - configure/customize your LEDs...
 

I think I found a found a conflict between nueLED and QuickMenu.. Though I'm not specifically sure how to recreate it.. Sometimes, if I receive a message, the orange notification light will start flashing, which is good.. But even after I read the message, it will continue flashing until I go to my Today screen, and touch the QuickMenu battery bar in the top right. I think it's because it creates another notification that I can hit dismiss on thus canceling the orange light. Anyone else seen this? Or does QuickMenu just suck and I shouldn't be using it anyways? ;)


Also, I have your ROM, no2chem, build 5049 with the nueLED built in.. If I wanted to upgrade to nueLED 1.5 when you release it, Can I just install? Or is there another step needed?

Thanks! Amazing work you do!!

Re: nueLED - configure/customize your LEDs...
 

My old LED Killer had an issue with QuickMenu if you had a specific option checked. Go into QuickMenu's option and under the view tab, uncheck the box for "Show on all titlebars". The way Quickmenu implemented that hack causes issues with LED control for some reason.

Just install it the cab version once I have the files available and it should work fine.

Re: nueLED - configure/customize your LEDs...
 

1.5 Cab Version Uploaded

http://forum.ppcgeeks.com/showpost.p...8&postcount=20


v1.5: fixed registry glitch
added support for sleep mode

Re: nueLED - configure/customize your LEDs...
 

Yeah, I noticed it did it really badly, like every message I received, when I had "Show on all titlebars" on.. But I have it off and it still does it every 10th message or so. It's not a dealbreaker by any means, Just confusing sometimes when you go "Oh, I have a message", wake it up and see there's nothing..

Re: nueLED - configure/customize your LEDs...
 

I just did this, and it didn't work. The cab installed fine. Called for a soft set, I did. Now when I go Start->Settings->Personal->nueLED, I get a popup that says "We have detected you have registry entries are corrupted. We can clean these for you but you will lose all your settings. Clean the registry?"

I click Ok and it gives Error... "An unexpected error has occurred in nueLEDConfig.exe. Select Quit and then restart this program, or select Details for more information."

Details leads to
"nueLEDConfig.exe
UnauthorizedAccessException

at
Microsoft,Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
at
Microsoft.Win32.RegistryKey.DeleteSubKey(String subkey, Boolean throwOnMissingSubKey)
at
nueLEDConfig.Form1.refreshComponents()
at nueLEDConfig.Form1..ctor()
at nueLEDConfig.Program.Main()"


Hope that helps any debugging :)

Re: nueLED - configure/customize your LEDs...
 

yea i got the same error

Re: nueLED - configure/customize your LEDs...
 

man v 1.1 wouldn't uninstall all the way....I hard reset....now same issues as with one to get v1.3 to uninstall? what am i doing wrong?

Re: nueLED - configure/customize your LEDs...
 

Hey folks... quick quesiton... using 1.5 i redirected the notification LED to the Bluetooth LED.

I then sent myself an email, it came through on active sync, the bluetooth LED blinked as it should, but then it wouldn't stop. It just kept blinking even though I had dismissed the notification, and read/deleted the email.

Am I missing some setting somewhere, or would this be a potential bug?

Re: nueLED - configure/customize your LEDs...
 

ill see if i can recreate it...Doing a reinstall now after i hard reset yet again.

Re: nueLED - configure/customize your LEDs...
 

Cool. Mine was a fresh install, as I had just installed DCD 2.3.1 ROM prior to installing nueLED, so I don't think I would have had too much gunk in the system to mess it up.

Re: nueLED - configure/customize your LEDs...
 

do you have quickmenu installed?

Re: nueLED - configure/customize your LEDs...
 

It would be cool to have both the red and blue LEDs flash back and forth when your phone is ringing. it would be like a police car...:)

Re: nueLED - configure/customize your LEDs...
 

well, if someone would figure out the red led address, maybe.

Re: nueLED - configure/customize your LEDs...
 

same problem here.

Re: nueLED - configure/customize your LEDs...
 

That's the exact error I got! I was going to post that last night but got lazy...heh. I'm trying again to remove 1.1 doing a couple extra things first. I'll let you know if I am successful...

verkion

Re: nueLED - configure/customize your LEDs...
 

No I don't. I have nothing installed but nueLED, as it was the first thing I installed after flashing the ROM.

Re: nueLED - configure/customize your LEDs...
 

OOOKKKK...Here we go guys! So, for those of you with 1.1 installed that CAN'T GET RID OF IT, and whenever you install new versions, pops up the whole nonsense about registry settings being corrupted, and errors in the nueLEDconfig.exe...this procedure works - ONLY CAVEAT is that nueLED 1.1 still shows up in the uninstall program list and I have NO IDEA how to remove it from the list! Having said that, all SUBSEQUENT VERSIONS WILL WORK STILL.

Step 1: Uninstall 1.1 from the remove programs...yah yah, I know it says it can't uninstall properly...just ignore that.

Step 2: Reg edit according to 1st page:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AllLEDMgr]
"Index"=dword:1

ALSO CHANGE
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\nueLED]
"Index"=dword:2

Step 3:
Reboot!
Your original LED pattern, (i.e. signal light should be flashing etc.)

Step 4:
If you can, delete the nueLED key from above...it wouldn't let me on my PDA though...

Step 5:
Install newer version -> 1.5 last I checked. It WILL install properly this time, (installation says successful, but it won't ask you to reboot.) You can now start up the new nueLED program (pun intended :-)) and make whatever changes you want without it crashing.

So...if anyone knows how to delete old entries from the installed program list, please post the solution!!!

verkion

Re: nueLED - configure/customize your LEDs...
 

i installed 1.5 right after a hard reset..I also have quickmenu installed. i had to hard reset to remove v1.1 as well as for v1.5 cause they wouldn't uninstall all the way.Also i received a call ignored it after i cleared out the notification my redirected bluetooth notification light still blinked.