Re: nueLED - configure/customize your LEDs...
 

I set the notifications LED to solid green..but it always sticks..and I have to manually reset the LED.

any help? --im using 1.5 in no2chems rom

Re: nueLED - configure/customize your LEDs...
 

took my about 4 tries to get my charging led to change and stick to bluetooth led.. my advice would be keep trying
I'm on dcd1.7
edit- unfortunately when I stop charging the bluetooth led keeps going.. and bluetooth isn't on. If I turn bluetooth on and back off, the led stops

want I want is for charging to be solid blue, that way it's not so bright when I'm sleeping ;)

Re: nueLED - configure/customize your LEDs...
 

I'm having the same problem as someone else has posted. I install the most recent version (1.5) and set the signal light to the blue and soft reset. My Mogul restarts and is kicked back to a flashing green. I reopen the program and everything is back the way it was before I made the changes.

I've retried this about 10 times with no change, so if someone can give me some help I'd be most appreciative!


Thanks!

Re: nueLED - configure/customize your LEDs...
 

I'm having trouble with this. I'm trying to re-direct the signal LED to bluetooth LED and the bluetooth LED re-directed to the signal LED. Under the configurations, everything is properly re-directed, even after numerous soft resets and power-downs. The problem is the LEDs won't change to their re-directed settings. Any input, my friends? TIA! =)

Re: nueLED - configure/customize your LEDs...
 

*UPDATE* The signal LED will flash blue (signal LED re-direted to bluetooth LED) after a soft-reset and when I turn on bluetooth, it will flash orange (bluetooth LED re-directed to signal LED) but when I turn off bluetooth, the signal LED goes back to blinking orange. When I turn bluetooth on AGAIN, the blue LED won't come on. The only LED blinking is the orange LED on the right side. Grrrrr....

Re: nueLED - configure/customize your LEDs...
 

Just a status check... Is anyone trying to find a way to make the blue or green LED's solid? Also, is anyone working on making the red LED solid, or even to keep it flashing red?

Keep up the great work no2chem


Just in case you didnt think of this before - the green LED DOES turn solid when the phone is done charging... you could put the phone into diagnostic mode and see what address it turns up.

Re: nueLED - configure/customize your LEDs...
 

not until i know more about the iocontrols, and whether its even possible (if the hardware doesn't have a way to manually control the leds, then i would be afraid not...) been working on 5050 though .. so yeah.

Re: nueLED - configure/customize your LEDs...
 

all diagnostic is picking up is 4 0 for me now. weird.

Re: nueLED - configure/customize your LEDs...
 

Same here.

Re: nueLED - configure/customize your LEDs...
 

Great program!

I got the signal led to flash blue successfully! awesome!

I would love to see if we could get it to go red/blue flash back and forth on incoming calls. That would for sure get my attention!