PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Titan Development (http://forum.ppcgeeks.com/forumdisplay.php?f=57)
-   -   nueLED - configure/customize your LEDs... (http://forum.ppcgeeks.com/showthread.php?t=18871)

qwho 02-25-2008 09:57 AM

Re: nueLED - configure/customize your LEDs...
 
I believe the orange light is the red and green lit at the same time. I've seen the combo red-green LEDs at radio shack, which are to display red, green, and orange. Check out the quote below...

Quote:

Originally Posted by cj10488 (Post 192643)
1 thing I did notice is that the Orange Charge light does not light while the red light is blinking...


James


That's probably because the command to keep the red blinking is interfering with the orange light command, which is to have the green and red on at the same time. Now what is interesting to me is that I originally thought the left LED could only display blue, but the poster who saw a white light come from it makes me think maybe it can display other colors.

ooshnoo 02-25-2008 11:25 AM

Re: nueLED - configure/customize your LEDs...
 
Quote:

Originally Posted by kaos (Post 192546)
i installed 1.5 right after a hard reset..I also have quickmenu installed. i had to hard reset to remove v1.1 as well as for v1.5 cause they wouldn't uninstall all the way.Also i received a call ignored it after i cleared out the notification my redirected bluetooth notification light still blinked.

So I'm not the only one. No2Chem, any thoughts?

qwho 02-25-2008 01:34 PM

Re: nueLED - configure/customize your LEDs...
 
So far for me, if I rearange any of the alert flashes, they will not stop blinking once the alert is dismissed. This is the same if I switch the wireless one, when I turn off the wireless, it still flashes. All is well after a soft reset though.

xweaponx 02-25-2008 03:13 PM

Re: nueLED - configure/customize your LEDs...
 
For public information:

If you have an earlier version installed of nueLED (I had the rom-equipped 1.0) and try to upgrade by .cab, first delete ALL of the registry keys & values for current version of nueLED. Then install 1.5 or higher .cab.

Keys are located here:
HKLM-->Software-->Wei Enterprises-->nueLED

This enabled a clean installation without the registry key value errors...

kaos 02-25-2008 03:18 PM

Re: nueLED - configure/customize your LEDs...
 
Quote:

Originally Posted by xweaponx (Post 193355)
For public information:

If you have an earlier version installed of nueLED (I had the rom-equipped 1.0) and try to upgrade by .cab, first delete ALL of the registry keys & values for current version of nueLED. Then install 1.5 or higher .cab.

Keys are located here:
HKLM-->Software-->Wei Enterprises-->nueLED

This enabled a clean installation without the registry key value errors...

hmmmm.. i had cab 1.1 installed wouldnt uninstall all the way...then after i found these keys the other day and deleted.my lights went dead completely..still also had it in my personal under settings..deleted more keys relevant to it...them mycpl 26 was there...had same issue with 1.3...just couldn't get rid of it and if i did it still showed under remove programs list....both cases i ended up hard reseting after hrs of exploration with resco and bestregedit.

ForTiLLiaN 02-25-2008 06:47 PM

Re: nueLED - configure/customize your LEDs...
 
I was running v1.0 that came with the Rom i installed with wm6.1 I did the registry changes stated here, but i also keep getting registry values corrupt errors. How can i complete remove NuLED, and then install the new version?

I have deleted the nueled registry settings, both in drivers and software. But it nueled still shows up under settings. And i cant manually delete the files in the windows directory associated with nueled because its in rom memory. Any ideas?

no2chem 02-25-2008 07:26 PM

Re: nueLED - configure/customize your LEDs...
 
Quote:

Originally Posted by ForTiLLiaN (Post 193585)
I was running v1.0 that came with the Rom i installed with wm6.1 I did the registry changes stated here, but i also keep getting registry values corrupt errors. How can i complete remove NuLED, and then install the new version?

I have deleted the nueled registry settings, both in drivers and software. But it nueled still shows up under settings. And i cant manually delete the files in the windows directory associated with nueled because its in rom memory. Any ideas?

the old versions have a bug that make them difficult, if not impossible, to remove =(

no2chem 02-25-2008 07:32 PM

Re: nueLED - configure/customize your LEDs...
 
Quote:

Originally Posted by qwho (Post 193023)
I believe the orange light is the red and green lit at the same time. I've seen the combo red-green LEDs at radio shack, which are to display red, green, and orange. Check out the quote below...




That's probably because the command to keep the red blinking is interfering with the orange light command, which is to have the green and red on at the same time. Now what is interesting to me is that I originally thought the left LED could only display blue, but the poster who saw a white light come from it makes me think maybe it can display other colors.


also, i've seen a white led on the left of the mogul before when i was messing with values...

...too bad i can't replicate it.. at the moment.

no2chem 02-25-2008 08:00 PM

Re: nueLED - configure/customize your LEDs...
 
ok, got another address ,

slow notification LED, address 4, mode 8
you'll need to turn off the address 4, 0 control in order for this to work...

[sammich] 02-25-2008 11:05 PM

Re: nueLED - configure/customize your LEDs...
 
Umm... can I get my phone to flash like a RAINBOW??

Just kidding, btw...

I still think there is a way to combine colors. What kind of LEDs are these lights? Are there multiple colors, or is it one that can change


All times are GMT -4. The time now is 01:01 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0