An Easy Guide to Upgrading

[Spyder1]

I"m stuck on step 2 guys.. Can't get the MSL number from the getspc file. After I put the hex number and click go it tells me " Could not link to DLL". (??) And i've been researching like crazy...

And after trying this updated relocker from Rally1 i get an error" Titan Relocker is not a vaild Pocket PC application." what do i do...

[Rally1]

I had the same MSL error, the solution is to copy the PPST_KeyGen.dll file over with the GetSPC.exe (makes sense even though it doesn't tell you to).

Now stuck at step 4, 290 error at 11% (just like 6800geek).
PS, are you running the relocker from the PC?

[jagu888]

Now, in answer to your question about going back to an official carrier released rom,
such as 2.17.
1. Follow the guide through step 3
2. Now, while still in the bootloader screen on your phone, run your carrier released rom (such as 2.17)
**This will also install the correct radio for that software rom**
3. Then proceed to steps 8-11, because going backwards WILL erase those settings in your phone.

I have 3.16 rom but I need to go back to 2.17, so I ran the Titan_Relocker.exe and followed each step carefully. I then see "Your device should now be locked it will show bootloader version 1.06", looking over my mogul bootloader screen, it show "TITA100 MFG SPL-2.30.Olipro", I am thinking this is not good. I continued with flashing 2.17 rom, it failed with 328 error. the phone is now stuck in tri-color bootloader screen.
Did I use the wrong Titan_Relocker.exe? help, help, help, pleazzzzzzzzz....

[jlylereeves]

Originally Posted by Spyder1

I"m stuck on step 2 guys.. Can't get the MSL number from the getspc file. After I put the hex number and click go it tells me " Could not link to DLL". (??) And i've been researching like crazy...

Copy the PPST_Keygen.dll in the zip file to the same location as the program.

[Rally1]

I kept getting the 290 invalid command error at 11% on step 4. Even though other posters seem to insist just keep trying, that doesnt apply to all of us. I tried multiple times, multiple PCs and cables, same error, so some phone just dont like it.
So I installed from the SD card: http://forum.ppcgeeks.com/showthread...nvalid+command

However I also got an error when it got to Os install. Obviously something strange going on with my phone.

So I:
Ran titan_exitbl.exe
reset
Ran Tital_Relocker.exe, where is says disconnect I unplugged the USB cable, and then reconnected. ensured AS was off. Continued.
Still in Tricolor screen ran TITAIMG from the SD card.
UPDATE success.

Now to install a custom ROM once I verify I have the radio installed.

[Spyder1]

Originally Posted by Rally1

I had the same MSL error, the solution is to copy the PPST_KeyGen.dll file over with the GetSPC.exe (makes sense even though it doesn't tell you to).

OH i c...i synced the whole folder to the phone and it still wasn't working...BUt once i extracted the PPST_KeyGen.dll file in the phone then it worked.....thanks. Now on to step 4

[cuadradoa1]

I have VZW, and I depend on Wireless Sync for contacts, notes, appointments, etc. If I install a custom rom, will delete Wireless Sync that Verizon provides?
Thank you for all your help!

[serious06]

ok i think i did something wrong cause after i installed the un official rom it went theu the steps and now im just stuck on the sprint loader screen, i tried doing a hard reboot and still nada, i still get stuck on the yellow sprint load screen.. anyone has any inputs on what to do next, thanx

[Spyder1]

OKay i got out of the bootloader screen by doing a soft reset.... I've tried uploading DCD rom now on the phone but i get an 262 Communication Error! I read that someone else on this board got the same error and then got it to work....So any help would be great..

[hoch2104]

I'm stuck as well. I got to the step where I loaded the new GPS update, then I try the locker and my computer won't find my phone, I've restarted and tried it nothing. Is it Vista?. It beeps twice when I plug it in, but nothing. I can surf the internet, but cannot make calls or receive.