Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

I believe it is a problem inherent with the GSM dialer embedded with 5051, 5052 & 5053. 5054 doesnt have it and the dialer works great (instant answering, transfering, call waiting, and call ending). The GSM dialer is fancier but I can logically sacrifice the extras for stable functionality...

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Yea, I think that the search feature is nearly irrelevant for a 257 page thread receiving more than 100 new posts a day - haha.

Regardless, though, I've noticed the same problem with the dialer in the recent builds.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Good. I was wondering what happened to the old dailer. I had issues wiht the new one as well

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

i wish he go back to putting in the normal dialer....since 51 to 54...when ever i use my big button dialer It is so whacked out looking.Tried 48 with the new radio..man there was a fun experience....had to soft reset every time i wanted to end a call..lol....I went back to the 3.35 sprint...at least until the dialer issues are rectified...

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

I agree he should use the stock dialer. People can use their own dialers if they want to.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

No offense guys, but I think we've exhausted the dialer issue. It's probably been mentioned in half the posts in the past 20 pages that there are issues with it or that it's not the preferred one.
No sense in beating a dead horse, ya know?

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

What is the nueAGC that is in 5054?

JD

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

nue Advanced Graphics Controller perhaps? lol j/k, one can dream though, no?

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Run it and see

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

I thought beating a dead horse was the main focus of every thread here ;)

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

... and then come back and tell us! lol

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Any ETA on the revised 5054?

tsp

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

@ 7:25 pm tonight! keep hitting refresh so you can be the first to get it....:angry7:

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Holy sh** calm the heck down. If you want something stable that quickly then download the stock rom or 5048.

Posts like this makes some say "screw it, make your own roms". I really don't want that.

On another note No2Chem said that he will be reverting back to the stock dialer in an earlier post. Some of the people complaining about the glitched dialers are some of the ones *****ing at others to use the search feature.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Get em S-Q!!! Get em all..... no points for being a tattle tho...:evil4:

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

NueAGC is an automatic gain control. It automatically adjusts the volume while recording notes or not if disabled it comes disabled by default.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

i would be sick of all the complaining if i was no2chem. he doesnt have to post his work for us but is kind enough to share his progress. he says it is a work in progress in the first page so any complaining about instability can be fixed by you going to another rom. this should really be a question,answer and kind suggestion type of thread. all complaining should be removed IMHO.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

My thoughts exactly!!

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

you bet your buns i will :P

i plan to donate to no2chem by the way and i suggest you all do too
PAYPAL DONATE HERE (link from first post)

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

that was 7:25 pm EST... and what i didnt tell you all was that it was only available to the first 2 people that d'loaded..... snooze you loose....

only a joke, dont panic...

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

lol i was joking too..and i've been on ppcgeeks all day basically....trust me i would have been the 1st person to d/l it. i think i was number 1 for 5054 :P

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

The only complaining I see is the people complaining about others complaining..... funny how that works.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

when i first read the post i was kinda excited but reluctant to customize considering jus finished that bout an hour ago then i sensed the sarcasm. took me awhile. just goes to show i need more sleep then 6 hrs. every 2 days.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

yeah.. and i really don't mind when people post the same question over and over... b/c normally if they are posting such easy questions.. obviously they probably aren't very computer savvy in the first place otherwise they would have used the (handicapped- really hard to use) search function already.

so.. if you are a noobie and have a question.. don't' be afraid, i won't flame you and will help if i can!

the only way to keep a really long thread organized, IMO, is for the thread starter to keep an updated FAQ

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

You should make this your sig... true and true....

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

i normally wont flame but seeing something about the dialer posted after no2chem posts his solution kinda gets under my skin.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Those with the dialer screen problems try one of this one, ive used this with all(well just about all, might have skipped one or two) of no2chems roms and sprints with no ill effects. The data arrows are only on if im online, and shows signal strengh when im not.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

can we get a screencap or 2? please

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

fyi i have found that with 5054 i nkow at least pcm keyboard .13 works. i havent tried the other on screen keyboards yet.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

I normally use the iBliss dialer, but that has the problem. I then tried the Wizard RETOUCHED dialer (Touch themed) and that works with no problems. Not as pretty, but it'll do for the time being.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

I loaded Olipro 2.4 and then have the official 3.35 rom loaded.

I'm trying to load nueRom 054 and it installs fine but afterwards it stays stuck on the HTC screen, am I missing a step?

Ive had an older version of nueRom loaded previously before I loaded the official 3.35

Any help would be greatly appreciated.

Thanks,

~J

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

you need to hardreset---take out battery then put it back in... hold down both soft keys, the press and hold the reset button the bottom of your phone... a menu will come up asking you to hard reset.. follow instructions and it should work! ( i think :-/)

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

You see if i hadn't told you to read up u wouldn't even find it.. and now you like the rest of us. I personally think that in order to ask u should at least read first and last 5-10 pages of the thread if u r really using the product. I was not trying to be rude. Just because people like to ask before they read that why the thread is so long in the first place, and then they complain come on the thread is too long, u can't expect me to read it all.. Well not all but at least some. If it's the latest release and it's been a couple of days already, just do urself a favor and read last 5 pages. U will save us and urself the time and space. I will not write again about it the thread is too long as it is...
P.S. and why should i have remember what post had the answer for ur question, u said it urself the thread is too long, so u can search for it just like anyone else can. Hope I was not rude, rather informative.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

i think we need to get a better search function at ppcgeeks.com ... for example these searches don't work

spc
prl
hlr
msl
##
xx%
n2c
.cab / .zip / .rar
etc..


there are tons of times when i tried searching for something, but couldn't find it due to only 3 characters or invalid search.. those up above were just most recent

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

you add * as a wild card to the fourth letter....like that even on google bro.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

thanks Kaos. I didn't know you could do that. Goodbye error message. Yippee.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

to those saying not to report issues...your morons...no2chem wants to know issues....I was one of the first saying about dialer when 51 came out...its called constructive feedback...If you don't tell the issue then issues won't get resolved...If you don't like reading about it close your eyes..i read his post and as i said i await patiently...But to post pics of the issue helps him figure out why and what is causing it...Its called cause and effect people....btw another donation sent no2.unlike other criticizers...thank you for all that you do.....

no problem bro...if you need a prl pm me...i have a link and info how to update...thanks to no2chem.....did mine yesterday again....after like flash 1000...lol

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Or we just dont have time to sort through the hundreds of posts that come up withg the searches we do.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

Also finding out with 5054 that its not auto picking up the SD card. You have to do a reset in order for the card to show up in file explorer.

Re: No2Chem nueROM 2.0 (WM6.1) Thread
 

This is the same problem I ran into, I finally got it to move forward by taking the storage card and the battery out. (not sure which did the trick) waiting 10 seconds, then putting only the battery back in. It finally got past the HTC screen, but then kept rebooting on the alignment screen.

I think I finally tracked the problem down to possibly (stupid me) having done the flash with the battery lower than I thought. It occurred to me today that I flashed at the end of the day yesterday, and my battery may have been too low.

I reflashed in the morning with a full battery (it charged all night with its power off) and its been working fine since. Incidently, I had to have it tethered as it went through its endless reboots and catch ith with the MFG Titanunlocker on one of the three second intervals where activesync picked it up. Got it stopped in the Bootloader then reflashed.