![]() |
Re: Titan ReLocker - The Hard-SPL undo option
Rename the RUU_signed.nbh to TITAIMG.nbh from the RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4 350H_SPCS_AM_Ship
Then put it on a, mine was a 2GB, memory stick formated in FAT32 Soft reset while holding power and camera to boot to oli, mine was 2.40, while the memory stick is in the phone It will load TITAIMG.nbh and ask for you to hit power to start to flash the phone. After your done flashing it will say UPDATE SUCCESS. Take out the memory stick and hit the soft reset button. You should have the most updated radio and the stock sprint software. Don't even bother booting to the crappy sprint stuff just go ahead and find your choice of ROM and rename the nbh file to TITAIMG.nbh and do the steps above. Enjoy!, you just byp***** that whole unlocking/re locking/possibly bricking your phone. -xboxexpert |
Re: Titan ReLocker - The Hard-SPL undo option
Okay.. stupid question. What if we need to flash back to the OEM rom.. do we just flash back to it? If so, is there anything we need to do otherwise, if say, we need to take it to get serviced or what not? So they can't tell we flashed other stuff to it or what not.
|
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
Guess if need be I can flash to a pre 3.35 rom then use the working/older re-locker, then up back to 3.35, no? (If so, where can I find one of the older ROMs, since HTC only has 3.35 up). |
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
see this thread for more details... As far as taking the phone in for service, if you flash the official 3.35 ROM then you will have the Sprint Radio and Sprint ROM, only the bootloader will be different. Chances are that the store wont even notice the bootloader. |
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
Here is the 2.17 ROM: http://download.america.htc.com/RUU_...47.01_Ship.exe |
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
Just a quick question....I flashed No2Chems 5060 Rom via PPCKitchen successfully but I am considering reflashing to another Rom or the latest official Sprint Rom. I am still fairly new to this, so I want to check before doing anything. My question is:
I know I cant flash back to the Stock Bootloader due to the GPS radio...or at least thats what I am understanding. But can I flash the stock Rom while still using the Olipro Bootloader safley? Can I flash another custom Rom safley, still using the Olipro? Basically, I don't care about the Sprint Bootloader...just the Rom. I can safley flash the stock or a different custom Rom, correct? Also...the reason I am considering this at all is that SiriusWM5 will not connect with the No2 Rom. Anyone know if this is even compatible with this Rom WM 6.1? I try to connect, but it immediatley says connection failed.....wierd huh? |
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
I successfully downgraded from the 3.17 leaked rom after unlocking to stock everything is this new release (3.35) that different that it would brick my phone?
|
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
Quote:
see -> http://forum.ppcgeeks.com/showthread.php?t=23102 |
Re: Titan ReLocker - The Hard-SPL undo option
Is the link for Titan ReLocker.exe broken? I can't download it with both firefox and ie.
|
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
Where can I find the relocker i dont see it posted here.
|
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
it was from the leaked rom I relocked and flashed 2.17 via sd if im not mistaken
|
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
well I upgraded when the official rom was released but ill give it a shot I kinda like the idea of risking a bricked phone hehe insurance will cover it and I got a touch to hold me over till I get my new phone
|
Re: Titan ReLocker - The Hard-SPL undo option
hehe, once more with the ImCoKeMaN disclaimer
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
wish me luck
|
Re: Titan ReLocker - The Hard-SPL undo option
Just wanted to say thanks for the help. I apologize for the original post and I didnt see that other post. It was 6:30 in the morning and I had been up since 12 the following day so please cut me some slack. IMcokeman thanks for the relocker, it saved my phone from becoming a brick as you would say.
blademan1969 :headbang: |
Re: Titan ReLocker - The Hard-SPL undo option
I've read through this thread and found conflicting info, so I apologize for this basic question:
My Mogul is running ROM 3.16.N02.5047 and Radio 3.27.00. If I want to upgrade to the latest stock Sprint ROM, I DO NOT need to run IMCOKEMAN's re-locker first, correct? I am confused by the edit of bakntyme's post on page 10. |
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
make sure you have 2.40 Olipro Bootloader ;-) |
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
Thanks PPCNoob and Banktyme for clearing that up for me. I guess I was a little freaked out about the possibility of bricking. The original post before edit is copied in the post below it, so I just wanted to make sure.
|
Re: Titan ReLocker - The Hard-SPL undo option
Newbie here... Have looked at many threads on the topic, and can't find an answer to my question. Please pre-forgive my ignorance. I'm trying to put in as much detail as I can. Sorry if it's too much detail.
I have a relatively new Telus P4000/6800/Mogul. Wanted to activate the GPS, among other things. Read lots of great things about installing the Sprint ROM, and then putting a custom ROM on, and (at the time), how easy it was to go back to the standard Telus ROM. Everything worked great on the upgrade to the 3.35 Radio, and the nuchem custom ROM, along with the Olipro 2.4 bootloader. Was really running beautifully for the last few weeks. No problems at all. Yesterday, woke up and the green LED light was on, but no display what so ever. Tried a few things, finally had to remove the battery and start again. Symptoms on boot are, vibrate happens, LED doesn't display yellow, it goes straight to green and stays there. No other apparent activity. It does not even display the ROM/Radio version numbers. When I insert the power cable, the LED does not change to yellow as normally happens, it stays green. When I plug it in without powering it on, no LED lights at all (even after a very extended wait). I definitely have not dropped it, left it in a humid environment, dropped it in water or anything. I have been extra-ordinarily physically careful with this phone. Other bizarre symptoms are that through the two button / stylus reset, I can get the tri-colour bootloader screen, and I can even (seemingly successfully) install a new system ROM (ie, I can rewrite the custom one I have that was working for some period of time), I cannot get it to boot. Have tried the hard-reset as well, and even though it goes through it's re-write sequence, it fails to boot. Without going into recent forums, as I had downloaded the utility and the instructions prior to trying the 3.35 based ROMS, I did try the RELOCKER from imcokeman (bless you), but it appears to need a functioning system to work. It does not appear to function from a bootloader tri-colour screen. Question for imcokeman or anyone else who may have bricked their phone reverting back from a 3.35 ROM to a 2.x ROM: When you mentioned your phone was bricked when attempting to do this, does bricked generally mean you can't even get to the bootloader display? If you can get to the bootloader display, does it display the stock bootloader, or still the Olipro version? Ie: would someone be able to quickly tell from your bootloader screen that you've been messing about? At this point it looks like my possible paths are: 1) See if I can find an alternate battery to try out. 2) Possibly test another ROM to see if it boots. *** Tried the DCD 3.0.1 ROM. Now I get the red "No Radio" message on the 2nd screen, and the looping reboot. 3) Based on the responses to what people see when there phone is bricked after a revert, is there anyway to get the TITAN Relocker to function when you can only get to the bootloader prompt? Does anyone else have any other suggestions? Thanks. |
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
so they cannot be run bootloader Quote:
and yes bricked (download mode) = black screen (wont boot) + no bootloader Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
Thanks so much, PPC_N00B.
I was afraid of that relocker restriction. Okay, here's another neophyte question. Anyone know of a simplified ROM that won't try and activate the radio on boot (I know, I know, probably stupid to have a phone ROM that doesn't actually try and be a phone). I was just thinking that if I could get something like that, I could go back and try the relocker, and at least try and get the original bootloader ROM on there. I think what's happened, in looking around, is that I suffered a badly timed HW failure on my P4000, and of course, have now probably voided my warranty. Even if it is a physical problem. Aarrggh. I can't afford this. :-(. |
Re: Titan ReLocker - The Hard-SPL undo option
Theres a lot of info in this thread and I wanted to make CERTAIN I fully understood the essence of this thread.
As it stands today 5/2/2008; anyone with a stock ROM from HTC or through their carrier, ie the sprint ROM 3.35 that has EVDO A and GPS enabled can use the new Oli 2.4 bootloader/unlocker and flash a custom ROM and reflash the 3.35 ROM but CAN NOT go back to a previous stock Bootloader/ROM and relock the phone as was possible before 3.16 or 3.17 (whichever) ROM that activated the GPS. Also, currently, any attempt to step backwards to pre-GPS bootloader and ROMs on phones with activated GPS ROMS (ie Sprint 3.35), so the phone can be relocked to try to handle warranty issues, bricks the phone. Is this an accurate assessment of the situation as of this date? By the way, all you guys providing the tools, expertise and forums absolutely rock! Deepest respect and regards for your talented efforts. cef1000 |
Re: Titan ReLocker - The Hard-SPL undo option
Thanks for summarizing this. That's what I've gleaned as well, and would also appreciate the confirmation.
I'd be happy if I could even get the stock bootloader to display, if nothing else does :-). |
Re: Titan ReLocker - The Hard-SPL undo option
http://img132.imageshack.us/img132/1483/spltouchas9.jpg
Hi all, My HTC Mogul says: TITA100 MFG SPL-2.40.Olipro CPLD-9 Same screen like above. I need help to fix this problem, please. |
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
you have the same problem as me. come over to my thread. i'm hoping somebody can help us: http://forum.ppcgeeks.com/showthread.php?t=25987 |
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
|
Re: Titan ReLocker - The Hard-SPL undo option
The tri color screen is bootloader, try the Stuck in TITAN bootloader thread.
For those that want more info on why i took the relocker link away from here check this thread from the Vogue forum: http://forum.ppcgeeks.com/showthread.php?t=26082 It has slightly different version numbers, but the principles are the same |
Re: Titan ReLocker - The Hard-SPL undo option
I"m doing sprint's 30day exchange. I'll just reflash stock rom leaving the 2.4 booloader there and hopefully no issues will arise. Maybe they'll leave it which will make the phone that much better for the next guy.
|
Re: Titan ReLocker - The Hard-SPL undo option
IMCOKE, let me get this straight. Right now, I've got the PPCKitchen No2Chem 5060 Rom on my phone, with the 3.35.04 radio, and my phone is having weird screen problems. So I take it in to a store (knowing full well that I'm running a voided warranty phone) and they tell me they don't have them in stock, but will just ship me a new one. So I have to fedex my old one in when this new one comes.
I have the MFG 2.4 bootloader (and a cloned ESN, as a matter of fact, but that's sort of irrelevant,) and I don't want them to charge me if they deem that my warranty was voided, so if I now try to downgrade to the vzw stock rom (2.09, with whatever the first radio that came out was,) my phone will become a brick, correct? How detectable is the issue once the phone becomes bricked? Because if I can guarantee an unsalvagable brick, I'm down with that, since I just have to return a phone that isn't running the 3.35 radio. |
Re: Titan ReLocker - The Hard-SPL undo option
Option 2 is to pray that in the next week (that's the timeframe I have to return my old phone) VZW releases a 3.35 rom. Infinitely unlikely.
Option 3 is to flash rom 2.09 with no radio, and see what sort of weird incompatibility I run in to, with the prayer that whomever ****s with my phone at tech support doesn't look past the device version on the boot screen (lol) |
Re: Titan ReLocker - The Hard-SPL undo option
http://forum.ppcgeeks.com/showthread.php?t=25662
In this thread, everyone claims they reverted from a GPS rom to the stock VZW rom sans problem. Impossible, I say, but? |
| All times are GMT -4. The time now is 08:39 PM. |
Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com