Titan ReLocker - The Hard-SPL undo option

[puff]

Originally Posted by arcalaska

no go Puff, when I reset it I get a quick flash to a grey screen and it says; NO IMAGE FILE! and back into the bootloader screen.

Originally Posted by arcalaska

Am I able to do this with the micro sd card? I've tried quite a few I must be doing something wrong, I've tried on two different computers one vista and one xp.

also make sure the card is formated to fAT32, and if renaming from device dont include the .nbh extention
you may need to be unlocked to flash radio/OS Roms from bootloader

[arcalaska]

no I can't flash from the computer it wont recognize the device attached to the usb. yes i formatted the card and i cant find a way for it to do anything other than i stated earlier, although one thing i left out was in the upper right corner of the screen it has RUUNBH

[arcalaska]

I should probably give you more info on what i did... I had a 2. version through ACS alaska, i unlocked it then loaded ruu sprint 3. then i ran relocker

[puff]

Originally Posted by arcalaska

no I can't flash from the computer it wont recognize the device attached to the usb. yes i formatted the card and i cant find a way for it to do anything other than i stated earlier, although one thing i left out was in the upper right corner of the screen it has RUUNBH

so u can put it into bootloader? what radio do u have?

[puff]

Originally Posted by arcalaska

I should probably give you more info on what i did... I had a 2. version through ACS alaska, i unlocked it then loaded ruu sprint 3. then i ran relocker

sounds like you may need to flash back (downgrade) to compatible Rom/Radio to match your SPL
either that or somehow get back to compatible 2.x sPL (guessing your rom/radio are 3.x)

For downgrading (please be warned of the dangers of downgrading)
1) need to find stock non-gps rom
2) need to find compatible radio for your stock rom
3) enter bootloader on device and flash stock rom/compatible radio

ACS Alaska? Never heard of 'em.

[arcalaska]

I found the stock rom and loaded it on the sd card and it will go to a grey screen and says loading... but it doesnt do anything just locks up.

[puff]

Originally Posted by arcalaska

I found the stock rom and loaded it on the sd card and it will go to a grey screen and says loading... but it doesnt do anything just locks up.

well upon further research, i think you are hosed

as i prev posted, you appear to have 1.06 bootloader with 3.X radio/3.X rom - and since you cannot boot into OS then you cannot upgrade your SPL, and unless you can find a ship exe ROM (the dump you've already tried) you cannot flash back to stock with ACS Alaska. This means that both options are not available. If you had a different carrier it would be a different story. Sorry, couldn't be of more help.

[Dat_Dude]

Hey will this relocker work on my phone!?!?!?! I loaded a titan ROM and it made it so my phone will not turn back on at all.... I was wondering if I could do anything to get my phone back up and running.
Please help!?!?!?!?!?!!?!?!?

[carib909]

Thanks for this enormous Can you post a link for the " nueSPL Relocker" please? Some of us don't know exactly where to go to find it.=D>

Originally Posted by ImCoKeMaN

EDIT: This is no longer current after GPS came out, please see the nueSPL Relocker for the newer relocking option:
http://forum.ppcgeeks.com/showthread.php?t=30560

From the creator of the wm5 "upgrades" for the wm6 Titan comes a relocker to undo the Hard-SPL.

This is compatible with windows XP, please do not use on Vista at this time (unless you are sure you have modaco drivers installed)!

This program will flash a stock 1.06 bootloader to your device to remove the Hard-SPL. In general if you don't understand exactly what this is doing it probably is not for you. It does not give you any additional features, but it might make you feel more comfortable if you are getting warranty work done.

Run the exe and follow EVERY step of the instructions and you should be good to go. If you get stuck in bootloader with vista read the stuck in bootloader thread for links to different drivers. Other then that the standard disable USB in activesync will allow the included exit bootloader program to work.

Thanks go to Olipro for the help with the original Hard-SPL, I also used his modification to the Pof JumpSPL for the loader.
Thanks to Colonel and Luv2chill for testing and helping to clear up my poor instructions

and the link:

Titan_Relocker.exe is still on the FTP, but i removed this link because i want to make something abundantly clear first:
DO NOT USE THE RELOCKER FOR ANYTHING RELATED TO GPS ROMS, OR REVERTING BACK AFTER GPS UPDATE.
(see http://forum.ppcgeeks.com/showthread.php?t=26082 in vogue forum for more info. Vogue has different version numbers, but same principles)

Notes:

Has run fine on Vista for myself and others, but it might be good to have an xp box too

USB must work for this to flash, if you are worried about USB issues you should run this before it becomes a problem.

Make sure you are comfortable with exit bootloader steps first (disabling USB activesync and making sure you have the right drivers if in vista)

Flashing a rom will also exit bootloader and can be done from the 3 color screen.

CPLD-9 is just part of the stock 1.06 bl (from sprint 2.16) do not be worried by that. Also RUUNBH in top right corner will go away next time you enter BL

[demonlordoftheround]

http://www.nuerom.com/BlogEngine/pag...HTC-Titan.aspx