Re: WORKING Audiopara file for TOUCH!!!
 

I'm tried 'total commander' and explore from sync

it will not let me delete or overwrite the AudioPara.csv file

I tried changing the file setting from read only and hidden, 'uncehcking those boxes' but it doesn't stick

i even put this file from here, with shorten correct name on the storage card, so I could copy to windows.. NO go, i just keep getting a 'cannot delete' or cannot xxx error everytime i try

Re: WORKING Audiopara file for TOUCH!!!
 

Try Rescoe File Explorer, it has great options. Will allow you to unhide system files and show extensions.

You can transfer/download the file to your storage card, and choose "Move To" the Windows folder. Thats it. Done. Reset.

However, I didn't notice much of a difference, if any difference at all in loudness.

My latest AudioPara file for 3.xxx ROM series
 

Here's my personal audiopara.csv that you can use with the 3.xxx series ROMs.

I have increased the range of volume control for calls through normal speaker and speakerphone and increased the BT volume also. So on the lowest setting it is really quiet and very loud at the highest setting. Just make sure your files are not hidden and set the existing audiopara.csv located in the /windows dir to NOT read only.

Copy my file to your phone and then use Resco File explorer or Dutty's or Total Commander to replace the audiopara.csv in the /windows dir. Do a soft reset after replacing file.

Please give me feedback and let me know if you need any help, or if you need a custom file.

Cheers,
DJ

Re: My latest AudioPara file for 3.xxx ROM series
 

Thanks for this note and for the file. I wanted to ask about confirmation and announcement volume. Call volume is fine (for me) but the volume of Michelle is very, very low. Have you found any way to affect the volume of these announcements and confirmations? My experience has been that AudioPara file changes have no impact. Best regards, -boggsie

Re: My latest AudioPara file for 3.xxx ROM series
 

After placing this file in my phone's Windows directory I had no sound. I then used the one you posted in the previous page of this thread and find that my phone is louder all around. Thanks. Worked great for me.

Re: My latest AudioPara file for 3.xxx ROM series
 

Hey, thanks for the file. But this one's not loud enough for me. Looks like you changed column H for the earcuple. Correct? or could you make one that's maybe 2 steps louder, please?

Re: WORKING Audiopara file for TOUCH!!!
 

anyone make a step by step for this nothing worked

Re: My latest AudioPara file for 3.xxx ROM series
 

I still need a louder one. I tried to tweak the file but wasn't able to figure out which column to mess with. Can anyone help me out?

Re: WORKING Audiopara file for TOUCH!!!
 

how do i use this text files? where do i putr htem or what>

Re: WORKING Audiopara file for TOUCH!!!
 

I'm looking to make my ringer volume louder does this audiopara file makes the ringer louder?


THANKS

Re: WORKING Audiopara file for TOUCH!!!
 

1) I just put it in program files and opened it and nothing but txt?
2) What do i do to make this work?
3) How do i make it even louder, can i edit the file myself to do so???



Thank you so much i can't hear a damn thing on this touch

Re: WORKING Audiopara file for TOUCH!!!
 

i've tried two differnet files and with each i get the following message that i've never seen before:



String to replace must be at least one character

Line:
fileData = Replace(
fileData, datefile, dateFix)


WTF??????

Re: WORKING Audiopara file for TOUCH!!!
 

Ok so i place it in the windows directory and nothing happens? it doesn't ask me to replace the file or anything? I looked and i have windows mobile 6.0 does that affect this file??

Re: WORKING Audiopara file for TOUCH!!!
 

you need to rename the extension from .txt. csv then copy it into the window directory.

Re: WORKING Audiopara file for TOUCH!!!
 

I created a cab file to fix or replace the AudioPara file. This cab will replace the AudioPara with one that has been tweaked for a loud volume. There is not an uninstall of this cab. If you wand to go back to the old AudioPara file just delete AudioPara.csv in your phone window directory and soft reset.

Re: WORKING Audiopara file for TOUCH!!!
 

I've installed the .cab, but I'm not sure it hellped me, I'm looking for a higher level of output from the 11pin mini usb, I'm using it to output into car radio and the touch's volume (with tcmp or audio manager and phone at max) is only half of the cars other inputs like the radio or cd. If I plug my i-pod in the same 3.5mm jack into the car its also louder than the Touch :(

Re: WORKING Audiopara file for TOUCH!!!
 

Try this,
Download and install Totoal Commander. (Unless you already have it installed) :-)
http://ghisler.fileburst.com/ce/tcmdpocketarm.cab

After its installed open your windows directory using Total Commander. Scroll down and highlight audiopara.csv. Now click on the notepad icon on the bottom menu of Total Commander. This will open the file using a notepad application. Scroll down to row F25,CE_PLAYBACK_HEADSET. This is the setting for the headset. Each setting is separated by a comma. Setting 1 is F25, Setting 2 is CE_PLAYBACK_HEADSET and so on. Go to setting 4 which should be 4000. Change it to a bigger number, like 8000, then save the file and reboot your phone.

Test to see if the volume is higher and please report back. I would like to know if it helps.

Re: WORKING Audiopara file for TOUCH!!!
 

I gave it a whirl. After soft reset, I checked to make sure the change held, and it did, but the volume over wired headset is no louder...
Steve

Re: WORKING Audiopara file for TOUCH!!!
 

I just changed it and will try it later, I'll try 2000 also to see if I can hear any change either way.
Do you know how large setting 4 can go?
Is it 9999 to stay within 4 digits or can the number of digits go up?

Re: WORKING Audiopara file for TOUCH!!!
 

Its Hex, FFFF is the highest setting.

Re: WORKING Audiopara file for TOUCH!!!
 

Good to know, mey try that too.

Re: WORKING Audiopara file for TOUCH!!!
 

Wtf...i Am New To This. Please Help? I Need A Step By Step Tutorial.

Re: WORKING Audiopara file for TOUCH!!!
 

What are you trying to improve?

Re: WORKING Audiopara file for TOUCH!!!
 

do i dl the resco utility pack?

Re: WORKING Audiopara file for TOUCH!!!
 

the audio

Re: My latest AudioPara file for 3.xxx ROM series
 

Hello DJ,

can you tell me which of the audiopara parameter is responsible for audio level of internal audio recording? I use VITO Audio Notes v1.32 for calls recording and I have a problem with low recording level of others' voice (mine is recorded well). When I switch to Speaker phone, then both levels are recorded accuratelly. Mine as well as caller's voice are at the same level.
If you would be so kind and send me your brief description of each audiopara parameters, I would be very thankful to you. Otherwise, can you please modify original file from my HTC Touch Diamond P3700, which I have attached to this thread?

Thank you indeed!
Daniel

Re: WORKING Audiopara file for TOUCH!!!
 

can i use this on the Fuze or Touch Pro?? My cousin has the touch pro n i have the fuze and speakers r really low.

Re: WORKING Audiopara file for TOUCH!!!
 

How do you do this im using sprint htc touch diamond

Re: WORKING Audiopara file for TOUCH!!!
 

here is where you need to look

http://forum.ppcgeeks.com/showthread.php?t=38353

Re: WORKING Audiopara file for TOUCH!!!
 

Can Some Please Give Me The Link So I Can Donwload This To Make My Phone Louder.. Thank You..

Re: WORKING Audiopara file for TOUCH!!!
 

I have the htc touch pro an the volume is low how can i get it louder an how do i do it help help u can email it to me at corey_barcliff@yahoo.com thanks!!!

Re: WORKING Audiopara file for TOUCH!!!
 

Dude, seriously - giving your personal email is a bad bad idea unless you need penile enlargement while living in timeshares from the money you got helping out the long lost niece of Saddam who knows where the hidden millions are and splits it with you

LOL

Detroit Doug

Re: WORKING Audiopara file for TOUCH!!!
 

worked for me, thanks