[ROM][Finished 4/28/10]NagROM Touch[WM6.5.5 Build 23551][V0.19 Bare & V3.19 Manila]

[Lmiller1708]

Originally Posted by Firsttimer

I need some help. My HTC Touch touch screen died today. I can still use the phone with its buttons. But then I did a stupid thing... I reloaded the OS to see if the touch screen would come back. NO LUCK. Now my phone is useless because its stuck on the TAP HERE screen.

NagRom, Is there any way you can make a rom that doesn't go through the screen setup program on install? This way I could reload my contacts and use my phone until I decide on which one I want to buy as a replacement. (HD2 if Verizon gets it)

Thank You.

Firsttimer

Google something called My Mobiler. It might work, not for sure with out activesync running though... There is another one called asrdisplay that could work also but still needs to be connected though activesync.

All else fails try flashing back to stock...

Good luck!

[Firsttimer]

Thanks Lmiller1708. That kinda worked. It got me to the Align Screen screen but the mouse does not seem to work on this screen. If I can get pasted the alignment screen this program will be a big help.

I could not find the other program you spoke of.

Any other suggestions?????

Thanks again!
FT

PS: Installing athe default OS is what I am in the middle of doing now and is why I am stuck at the Align Screen screen

[Lmiller1708]

Originally Posted by Firsttimer

Thanks Lmiller1708. That kinda worked. It got me to the Align Screen screen but the mouse does not seem to work on this screen. If I can get pasted the alignment screen this program will be a big help.

I could not find the other program you spoke of.

Any other suggestions?????

Thanks again!
FT

Try this...
ASRDisp.exe runs on your PC.
cerdisp2.exe run on you PPC. If you can get to your PPC explorer though activesync place cerdisp2.exe in your windows/startup folder reboot And see if that works.
Hope it helps...

[Firsttimer]

That one doesn't work at all. It can't figure out what the OS is. I need a special OS install tthat does not need to align the screen to pointer app running durning the install. Could one be possible?

[hseldon]

Thanks NagRom for the excellent job!
Some question...
Meybe it's not really about subject ... but may be You help ...
New version [WM6.5.1 Build 23071] have no standard X-Button in the upper right corner of the screen,
it have the large X-Button in the lower right corner, but in this new button not available feature Tap-and-Hold - Close Application (Full close with free memory).
In most cases, I just need to close applications rather than "minimize".
For close application i must load Task Manager and Stop Applcation ... it's absolutely inconvenient.
How to restore a standard X-Button in the upper right corner of the screen or how to teach a new button in the lower right corner Tap-and-hold (Close Application) future?
old programs (HTC X-Button don't working)

-------------
By default, after installation Camera2 fails Camera-Button (wrong link).
I have fix in the registry camera.lnk->camera2.lnk, but it not good for simple users ... needs to fix.

[Nagrom Nniuq]

Originally Posted by hseldon

Thanks NagRom for the excellent job!
Some question...
Meybe it's not really about subject ... but may be You help ...
New version [WM6.5.1 Build 23071] have no standard X-Button in the upper right corner of the screen,
it have the large X-Button in the lower right corner, but in this new button not available feature Tap-and-Hold - Close Application (Full close with free memory).
In most cases, I just need to close applications rather than "minimize".
For close application i must load Task Manager and Stop Applcation ... it's absolutely inconvenient.
How to restore a standard X-Button in the upper right corner of the screen or how to teach a new button in the lower right corner Tap-and-hold (Close Application) future?
old programs (HTC X-Button don't working)

-------------
By default, after installation Camera2 fails Camera-Button (wrong link).
I have fix in the registry camera.lnk->camera2.lnk, but it not good for simple users ... needs to fix.

If you go back and read this thread your question has been answered about 30 times. The answer is, there is no way to get back what you had before. You must use the task manager (you can try an app calls Showcase but I don't like it). Windows Mobile has build in memory management and it will auto kill apps when it needs memory. So, don't worry about it. Just use your phone and WM will make sure you have enough memory.

[Firsttimer]

My phone, HTC Vouge/Touch's touch screen no longer works. However the phone still does via the buttons. In a effort to find out what the problem was I reinstalled 6.1 on the phone. Now its stuck on the Align Screen part of the install. I have tried two programs, mDesktop & My Mobile (ASRDisp didn't work at al)l, and they get me to the Align Screen part of the app where the cross hairs are in the middle of the screen. Then nothing works.

With mDesktop I can browse my files and pictures and with Mobile Registry Editor I can edit the registry.

To that end, what registry change(s) can I make so that when I power on my phone it will not run the align screen application and finish the installation process?

Once this is done I can at least use my phone via the buttons until I get a replacement phone.

All suggestions are welcome, Thank you in advance.

[Lmiller1708]

Originally Posted by Firsttimer

My phone, HTC Vouge/Touch's touch screen no longer works. However the phone still does via the buttons. In a effort to find out what the problem was I reinstalled 6.1 on the phone. Now its stuck on the Align Screen part of the install. I have tried two programs, mDesktop & My Mobile (ASRDisp didn't work at al)l, and they get me to the Align Screen part of the app where the cross hairs are in the middle of the screen. Then nothing works.

With mDesktop I can browse my files and pictures and with Mobile Registry Editor I can edit the registry.

To that end, what registry change(s) can I make so that when I power on my phone it will not run the align screen application and finish the installation process?

Once this is done I can at least use my phone via the buttons until I get a replacement phone.

All suggestions are welcome, Thank you in advance.

If you can get to you registry try this:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="2013,2070 3306,3060 3377,957 674,940 688,3067"

These are my settings. Let me know!

[brack21]

Originally Posted by hseldon

Thanks NagRom for the excellent job!
Some question...
Meybe it's not really about subject ... but may be You help ...
New version [WM6.5.1 Build 23071] have no standard X-Button in the upper right corner of the screen,
it have the large X-Button in the lower right corner, but in this new button not available feature Tap-and-Hold - Close Application (Full close with free memory).
In most cases, I just need to close applications rather than "minimize".
For close application i must load Task Manager and Stop Applcation ... it's absolutely inconvenient.
How to restore a standard X-Button in the upper right corner of the screen or how to teach a new button in the lower right corner Tap-and-hold (Close Application) future?
old programs (HTC X-Button don't working)

-------------
By default, after installation Camera2 fails Camera-Button (wrong link).
I have fix in the registry camera.lnk->camera2.lnk, but it not good for simple users ... needs to fix.

Here is what I did to close apps, I mapped my left soft key on my home page to task.exe and just tap it and close the apps I want to close. Just as simple as tapping the x.

[hseldon]

Thank You Nagrom, brack21...
---
Microsoft Corporation in its traditional sickening repertoire ...