Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9
 

I believe 18 because when he released it it was still 18. 19 came after his release.

Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 9/26
 

Games?!?!?!?!?! Ok, I gotta try this today...Since I discombobulated my kitchen last night. :)

Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9
 

Wow...Manila2d is quite a bit nicer than last time I checked it out. Here are my first observations:

The Good:
1. Nice and solid, no issues and I tried to break it... :)
2. The weather Rocks! It's raining here, and when you activate the widget, the screen get's dotted with drops of rain and a windshield wiper wipes it away! Nice animation...
3. YouTube works...never used it, but what else ya gonna do on a rainy day?
4. I discovered you can set the launcher to 5x9. Good stuff...

The Bad:
1. Launcher's empty
2. There is an update for livesearch available that the program catches...
3. Gotta revive my sdconfig.txt... lol... not...

The Ugly:
1. Them green boot up screens don't seem to fit... I gotta 2 second fix I can pm you when I get home...late tonight...

Other than that, great rom! Keep up the good work!

Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9
 

Hello All..... tried this for the first time.... now sitting at screen that says HTC smart mobility, but it isn't moving from there.

My phone is a Verizon vx6900
pre-update startup screen:
M 03
B 01
P ACAAAAM-4070
R 1.60.30
D 1.15

post ROM screen:
M 03
B 01
P ACAAAAM-4070
R 1.60.30
D 3.09

If anyone can help, it would be greatly appreciated. I am stuck. :( btw.... if I press power, camera and soft boot I get the unlocked three color screen and can connect to USB. If I reboot to the HTC smart mobility screen i can do nothing.

Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9
 

Your Radio is only 1.60.3? You'll need to follow the steps in the first post to be able to flash...

Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9
 

Thanks for your quick reply.... I did this, which i believe is why when I press power, camera and soft boot I get the unlocked three color screen.

Also, I did try the Official Bell Rom, but receive an error " ERROR[294]: INVALID VENDOR ID"

Any further suggestions would be great.

Thanks Again.


******Update --- what happens if the phone is not unlocked correctly and stuck at this point. I try to re-unlock and get "no device connected" thanks again****************

Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9
 

get back into bootloader mode (camera+power+reset), verify what version bootloader you are at....it should say in the upper left:

SPL-2.31.CoKe

if so, leave it in bootloader, connect the USB cable, then run the Bell Official exe & flash....make sure you skip the post flash carrier customization.

this will upgrade your radio, you must do this to proceed.


fyi---when in bootloader mode your activesync will not show u connected.

Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9
 

I did not install the unlocker correctly. the 2nd line does not say SPL-2.31.CoKe.. I tried to re-install the unlocker, but to no avail. do you have any suggestions with this bootloader version issue?

Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9
 

I thought maybe you needed to flash a 6.0 rom, but being that you're not unlocked that may not work either.

what i would do is send a PM to ImCokeMan and get his opinion.

Re: OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9
 

just to try... do you know of a 6.0 rom?