Stock rom links for cdma touch

[d0hboy]

Originally Posted by jerkstore

can someone post a link to the bell stock rom...both links on the front page are down

Originally Posted by ImCoKeMaN

Updated.
They changed the path and now you can't browse the full downloads folder like before. Oh well at least the old links work when you change to the following prefix even if they aren't the current rom (both bell links in first page work now) with http://handsets.utstar.com/downloads/ at the beginning

I tried the updated links but utstar's website still appears to be not working. In addition, I looked at the FTP site's listings and found Bell's rom to be much smaller than the others in the same directory. Is there a reason for this?

Name Size Last Modified
Alltel_RUU_signed.rar 54050 KB 5/19/08 1:24:00 AM
Alltel_reva_noSPL_RUU_signed.rar 58278 KB 5/19/08 1:23:00 AM
Bigstorage_SprintTouchRom.exe 52610 KB 5/19/08 1:26:00 AM
RUU_Vogue_SPRINT_WWE_1.12.651.1_2.13.00_SPC_NV133_ Ship.exe 62820 KB 5/19/08 1:28:00 AM
TNZ_Vogue_RUU_signed.rar 51416 KB 5/19/08 1:31:00 AM
Telus_vogue_RUU_signed.rar 48785 KB 5/19/08 1:30:00 AM
V3.02.rar 80680 KB 6/02/08 11:00:00 AM
Vogue_Bell_Radio1.59.10a.rar 3930 KB 5/19/08 1:31:00 AM
hutch_vogue_RUU_signed.rar 51587 KB 5/19/08 1:27:00 AM

[ImCoKeMaN]

The Telus rom has now been added! Anyone that had a "bricked" telus device from the alltel update and still has the phone can now unbrick it with the exe in the first post!

[boolieman]

Okay im confused, i have a well, stuck Verizon Vouge, i have put the cokeman NBH onto the card, i let it sit there for a minute as instructed, pushed the reset, removed the card, loaded the signed driver to the card then intialized the boot again, however it is stuck at "Loading..." and wont continue, is there something i should look for on boot manager to be sure i loaded the coke rom properly?, is there something else i should try? Yes this is my first messup on a smart phone, i am a computer person however, any help would be greatly appreciated!

[ImCoKeMaN]

you can't use the unlocker from SD, can you get back to the OS? What does the 3 color screen say on it? Also what rom did you try to use and what unlocker did you try to use?

[ImCoKeMaN]

New rom from Belize is up, still awaiting testing.

[ffyter]

Looking to dump my rom (Cellcom in Wisconsin). Can anyone walk me through it?

Nick

[StumpJuice]

Originally Posted by boolieman

Okay im confused, i have a well, stuck Verizon Vouge, i have put the cokeman NBH onto the card, i let it sit there for a minute as instructed, pushed the reset, removed the card, loaded the signed driver to the card then intialized the boot again, however it is stuck at "Loading..." and wont continue, is there something i should look for on boot manager to be sure i loaded the coke rom properly?, is there something else i should try? Yes this is my first messup on a smart phone, i am a computer person however, any help would be greatly appreciated!

wow i have this exact same problem. i have a verizon phone. when i try a stock sprint rom it says.. .loading and then real quick says... NOT ALLOWED in red and goes back to the 3 or 4 color tri-color screen...

but when i load a signed verizon rom... it says "Loading..." and just stays there... left it overnight a few times now...
i have spl 2.01.1000 which could be the factor... and i can't get back to wim mo to do active sync to try and load spl 2.31...

any help would be huge!

[DrGamete]

I have the same problem (Verizon as well). This is the 2nd Touch i've had; the first one everything went smoothly... This time I'm stuck.

I ran Coke 2.31; ran to the point of Coke loading the RUU, on reboot it byp***** the BL and shows a PPC WM boot screen, however it hangs there...On the PC I hit CTRL+C to end the Coke batch file, let the phone sit about 2 hours, reset the phone back into BL MODE; back to boot loader it still says SPL-0.36.0000.
I tried running RUU again on the PC with a VzW signed rom from
http://forum.ppcgeeks.com/showthread.php?t=19071
which just says it can't find device.
I've tried the unbrick method on
http://forum.ppcgeeks.com/showthread.php?t=24906
however that just as described above gets to the grey loading... screen and hangs.

Any ideas?

I've tried connecting via USB and loading a signed VZA

[vkolas]

i'm also trying to get the stock (verizon) rom installed. i got a little farther than the guys from the previous post.

I got the voguimg.nbh from unlocker 2.31, renamed to voguimg.nbh as per instructions, copied to the SD card (fat32). then I used the verizon vx6900 "signed" nbh image (renamed it to voguimg.nbh) on the sd card . the bootloader picked it up and installed it "successfully". however when I reboot, the same old custome rom "windows mobile" banner still comes up and it hangs.

FYI: I have a HTC Touch vx6900 (Verizon). i flashed a custom rom (sprint-based) and upgraded the radio to 3.xxx (also sprint-based). I'm using a 1GB SD card in formatted with fat32.

bootloader says spl-2.31 coke cpld-3.

Anyway, i'm still stock! Cokeman, can you help?

[kamikazyemt]

I have had major issues trying to get the internet to work on a cellular south vogue following rom upgrades the few files I have found for cellular south will not even load. I have a second phone that was just purchased and has a factory rom on it; Can i dump the rom off of the new phone and load the old one back to factory rom. I have the coke bootloader and I upgraded to sprint radio for gps and accidentally let the customizations run. I have tried other roms and am currently running bell and I need to start back from scratch and can not find instructions for backing up the fatory rom off the phone. Please Help!