User Customization Backup for Touch Pro using sashimi

[macjaynard]

Originally Posted by DV8Ways

I've been experiencing the same and have yet to figure it out... I was playing around in the 2577 folder and now........

I'll report back if I find a fix...

thanks much, I'd love to be able to tweak settings at times other than that initial install. :P

I wait eagerly.
-Mac

[D\/8]

Originally Posted by macjaynard

thanks much, I'd love to be able to tweak settings at times other than that initial install. :P

I wait eagerly.
-Mac

Well, I never really got it figured out... Played around and couldn't get it to start up... Read your post today and thought to myself let me give it a try... Launched SASHIMI and it booted up perfectly... Been testing off and on for the past few hours and have yet to experience again.

Go figure...

Just give'er a try and see if it launches for you... Make sure you launch from the shortcut in your start menu just in case...

Fingers crossed!!!

[deuceklub]

Has anyone ever been able to auto config or skip the calibration? My TP screen is dead and I can't get past that point. My mobiler doesn't help either, figure the gurus here may know something to get around it.

[zone23]

Total Commander configuration:

HKCU\Software\Ghisler

[murducky]

Originally Posted by quadjacks

I have installed the latest Arcsoft cab which is Sprint configured. My question is, after i edit the server info to VZW, where can i find the REG of those settings to back up?

EDIT:
Found where to back up see below

1) After setting up server info location:
While in email account, choose; Menu|MMS Options|Servers Tab

2) Set up Server

3) Using Sktools or prefered Registry Editor drill to:
HKLM\\Software\ArcSoft\ArcSoft MMS UA\Config\mm1\MMSCSettings\ Now Back Up>>>Current Server Name, which YOU established during step 2


NOTE: If you installed, as i did, a carrier specific Arcsoft Cab other than yours, EX. Sprint Arcsoft MMS 5.2.0.22 VGALocated Here you will need to return to the Servers Settings and make your Carrier DEFAULT, then deleting other Server.

Hope this helps

This was already on Post 1 under software

Arcsoft MMS Settings
backup reg key \HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1 export to Storage Card\SASHIMI\Auto\REG

Just got around to setting this all up...thank you for the guide. About to hard reset...

....wish me luck.


EDIT: Took fifteen minutes from flash to finish...awesome. ...and I think I can control the order that my cabs are installed by changing the name of the files...seems like they install in alpha order. Really dig this program, can't believe I took so long to set it up.

[lafester]

So I finally decided to try some of this today.. just been using an auto install app to load my .cabs and doing the customization later. I don't do a whole lot to my phone so it hasn't been too bad.

I finally got tired of setting up my slingbox and wanted to automate the install process using some of the tools here. The first thing I wanted was a good registry editor and I knew there was one out there that allowed you to navigate the phones registry on your pc. Looking at the XDA UC thread I found CeRegEditor which I must say is great!http://ceregeditor.mdsoft.pl/

This program will make .cabs of your registry tweaks and makes finding changes to your registry easy.... all done on the pc while synced. I am still learning but I have managed to get my slingbox 100% configured using either sashimi or the .cabs made by ceregeditor.

Thanks for all the tips here I am also figuring out some of the other customizations as well. Sashimi seems to install everything so I guess I will stick with it for awhile and see how it goes.

[CovKid66]

Originally Posted by lafester

So I finally decided to try some of this today.. just been using an auto install app to load my .cabs and doing the customization later. I don't do a whole lot to my phone so it hasn't been too bad.

I finally got tired of setting up my slingbox and wanted to automate the install process using some of the tools here. The first thing I wanted was a good registry editor and I knew there was one out there that allowed you to navigate the phones registry on your pc. Looking at the XDA UC thread I found CeRegEditor which I must say is great!http://ceregeditor.mdsoft.pl/

This program will make .cabs of your registry tweaks and makes finding changes to your registry easy.... all done on the pc while synced. I am still learning but I have managed to get my slingbox 100% configured using either sashimi or the .cabs made by ceregeditor.

Thanks for all the tips here I am also figuring out some of the other customizations as well. Sashimi seems to install everything so I guess I will stick with it for awhile and see how it goes.

SKTracker works wonders for tracking registry changes too. Unfortunately it's not free, but I think about $11. Not a big price to pay for the convenience of tracking down all of your registry, and file, changes You don't need your PC with this one either.

[CovKid66]

Some more registry keys....

SKTools5
Registration:
HKEY_CURRENT_USER\Software\sk\tools
"startup"=dword:nnnnnnnn [your your registration code here]

SKTracker
Registration:
HKEY_CURRENT_USER\Software\sk\tracker
"info" key
Settings (rules):
HKEY_CURRENT_USER\Software\sk\tracker
"rules" key

Spb News 2.0
Registration:
HKEY_CLASSES_ROOT\CLSID\{0A2D78B4-60D1-459D-AB3F-4D871E313E4A}
"ADODB"="your registration code here"
Settings:
HKEY_CURRENT_USER\Software\Spb Software House\Spb News

Spb Insight (version prior to Spb News 2.0)
Registration:
HKEY_CLASSES_ROOT\CLSID\{0A2D78B4-60D1-459D-AB3F-4D871E313E4A}
"ADODB"="your registration code here"

Spb Wallet 2.0
Registration:
HKEY_CLASSES_ROOT\CLSID\{A79D1B0D-2F6A-4E7E-AF94-5EEBC8BFD684}
"2_SIPFlag2"="your registration code here"

Spb Mobile Shell 3
Registration:
HKEY_CLASSES_ROOT\CLSID\{B8D93F90-8931-43BB-AA6D-0F0AE84A6200}
"SIPFlag2"="your registration code here"

SprintDB Pro 4.0
Registration:
HKEY_CURRENT_USER\Software\Kaione\SprintDB Pro\Config
"RegistrationCode40"="your registration code here"

Hearts (sorry, still one of my favourite 'old' card games)
Settings, including player name:
HKEY_CURRENT_USER\\Software\Microsoft\Hearts

[rawdikrik]

Originally Posted by CovKid66

Some more registry keys....

SKTools5
Registration:
HKEY_CURRENT_USER\Software\sk\tools
"startup"=dword:nnnnnnnn [your your registration code here]

SKTracker
Registration:
HKEY_CURRENT_USER\Software\sk\tracker
"info" key
Settings (rules):
HKEY_CURRENT_USER\Software\sk\tracker
"rules" key

Spb News 2.0
Registration:
HKEY_CLASSES_ROOT\CLSID\{0A2D78B4-60D1-459D-AB3F-4D871E313E4A}
"ADODB"="your registration code here"
Settings:
HKEY_CURRENT_USER\Software\Spb Software House\Spb News

Spb Insight (version prior to Spb News 2.0)
Registration:
HKEY_CLASSES_ROOT\CLSID\{0A2D78B4-60D1-459D-AB3F-4D871E313E4A}
"ADODB"="your registration code here"

Spb Wallet 2.0
Registration:
HKEY_CLASSES_ROOT\CLSID\{A79D1B0D-2F6A-4E7E-AF94-5EEBC8BFD684}
"2_SIPFlag2"="your registration code here"

Spb Mobile Shell 3
Registration:
HKEY_CLASSES_ROOT\CLSID\{B8D93F90-8931-43BB-AA6D-0F0AE84A6200}
"SIPFlag2"="your registration code here"

SprintDB Pro 4.0
Registration:
HKEY_CURRENT_USER\Software\Kaione\SprintDB Pro\Config
"RegistrationCode40"="your registration code here"

Hearts (sorry, still one of my favourite 'old' card games)
Settings, including player name:
HKEY_CURRENT_USER\\Software\Microsoft\Hearts

I dont use any of those... but F88K yeah! u get a thanks from me fo'sho