Cricket Full flashTouch Pro Tutorial Updated 1/27/2010

[whitey10tc]

**NOTE******************************************** ****
IF YOU ARE IN A CRICKET AWS MARKET YOUR DEVICE MAY NOT WORK
************************************************** ****

** Your device your actions you brick it it's your problem**


1st off credit is due to those that wrote these programs I only take credit for putting this all together.

Install the following before anything else http://justpctech.com/PPC/NETCFv35.wm.armv4i.cab (thanks edru)

#1 use msl grabber to get the msl/spc code found here
http://forum.ppcgeeks.com/showthread.php?t=43560
install via activesync or sd card and run on ppc.

#2 unlock with the unlocker listed here
http://forum.ppcgeeks.com/showpost.p...08&postcount=1
Read and follow the direction. VERY IMPORTANT!

#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work.
http://rapidshare.com/files/17615341...3_Ship.exe.zip
To do this connect USB to computer then get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
After this point you may need to run the unlocker again.

#4 Go to the following and download
QPST and windows htc driver http://www.4shared.com/file/15364011...m_Drivers.html
activesync4.5 http://www.4shared.com/file/10189370...actsync45.html
Vista users will need this driver (Thanks to Sergey123456 from XDA)
Install QPST on computer
Install htc drivers on computer
Install Activesync 4.5 on computer
Put phone into diag ##3424# or (snd) mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone set up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 209.210.15.72
pde port # 8888
pde transport IP
Position calculation mobile
Write to phone
close out
Do the following GPS Registry edits after installing desired ROM:
"HKLM\SOFTWARE\HTC\SUPL AGPS"
"GPSMode" value="2"
"ServerPort" value="8888"
"ServerIP" value="209.210.15.72"

I would recommend now to flash a custom ROM

You will need a cricket PRL to load http://www.megaupload.com/?d=GTWTR4I5 http://howardforums.com/showpost.php...43&postcount=1

then go to post #28 it will help you set up your pst setting correctly.
YOU CAN ALSO DOWNLOAD THE MMS CAB FROM HERE and then
Install the cricketwapmms cab
Do not try to open a data connection untill you have cricket service on the phone.
To authinticate your user name 10digit#@mycricket.com
you must have service.



If you are having issues with the orinal carrier setting reverting back try looking through these addtional QPST setting.

Please read the entire thread before posting Questions it may have been answered already and if it has I will only reference you to that post number.

[jpwhre]

well i have to say, ok, wow.

did the mms issue get resolved from my post?

[whitey10tc]

Originally Posted by jpwhre

well i have to say, ok, wow.

did the mms issue get resolved from my post?

Not fully! I know that it is a market issue though! I have been getting MMS consistantly since Mon and I've flashed 4 times.

[tonytec]

Hey would this work for the hTC Imagio???

If not what will?

Thanks in advance great post, even if I can't gain from it atm...

[whitey10tc]

Originally Posted by tonytec

Hey would this work for the hTC Imagio???

If not what will?

Thanks in advance great post, even if I can't gain from it atm...

Well I say this. NO!
This is for the TP, I haven't had the pleasure of an Imagio yet but I have one coming in next week after that I'll post a Tutorial for it.
*Edit*
The PST setting and QPST setting should work on the Imagio. Just not the unlocker or ROMS mentioned.

[915_tuscani]

what do i use for the regedit for gps Dword, string, which one do i use for all three and wut app is good for the GPS. thanks

[whitey10tc]

Wirelessly posted (Opera/9.80 (Windows Mobile; WCE; Opera Mobi/WMD-50286; U; ) Presto/2.4.13 Version/10.00)

Originally Posted by 915_tuscani

what do i use for the regedit for gps Dword, string, which one do i use for all three and wut app is good for the GPS. thanks

I would recomend using phm reg editor. Everything is there for the string, d words, etc. as for an app i use google maps.

[915_tuscani]

yeah, but am i puttin them as Dwords or strings or wut

[whitey10tc]

Originally Posted by 915_tuscani

yeah, but am i puttin them as Dwords or strings or wut

These should get you going, but you only need to modify what is there already unless your ROM doesn't have them.
"HKLM\SOFTWARE\HTC\SUPL AGPS"
"GPSMode" value="2" D word
"ServerPort" value="8888" D word
"ServerIP" value="209.210.15.72" String

Sorry for the delayed post I've been dealing with a Hospitalized relative the past few days.

[915_tuscani]

thats kool thanks for the help, and hope evrything goes well wit ur family