How to get iGo8 run on TP2 with TTS enable and 2009 NA Maps (step by step guide)

Blackcircle · #1 (**permalink**) 01-06-2010, 06:53 PM

I still haven't been able to see this software on my TP2. I have tried everything and have followed the steps on 1st post. What am I doing wrong? I keep getting message: "Program application database cannot be found. Please insert original application SD card." Could someone help me out with this please? I was told to delete the [folder] in SYS....tried but did not work. Thanks.

My SYS.....

[device]
Type="HTC Touch HD T8282"
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
popup_info=1
shutdown_time=0
vga=0
[rawdisplay]
highres=0
autoconfig=1
driver="GDI"
[sound]
ding=0
sound_q_length=200
queue_length=200
[config]
autoset2donmap=1
autoset3don****pit=1
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[map]
2dheadup=1
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000
max_poly_segments_shown_1=400 ;makes map drawing a lot faster
min_poly_segments_shown_1=200 ;makes map drawing a lot faster
[3d]
fade_distance_for_car=5
fade_distance_for_guidance_arrow=50
fade_overlap_tolerance=80
[3d_config]
rotated_roadsigns=0 ;názov ulice na ceste horizontalne(0) - otoceny(1)
disable_roadsign_navigation_mode=0 ; nazov v baloniku (0) - nazov na ceste(1)
[roundaboutcam]
enabled=0
centery=50
[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
[power]
powermgm_state=0
backlight_day=100
Backlight_night=65
[poi]
enable_pois_before_080217=1
[tmc]
;port="COM,4"
;source="royaltek"
saved_config_available="1"
[warning]
warn_distances=110:500,80:350,60:300,40:250

**aznmode** · #2 (**permalink**) 01-06-2010, 07:42 PM

Quote:

Originally Posted by Blackcircle

I still haven't been able to see this software on my TP2. I have tried everything and have followed the steps on 1st post. What am I doing wrong? I keep getting message: "Program application database cannot be found. Please insert original application SD card." Could someone help me out with this please? I was told to delete the [folder] in SYS....tried but did not work. Thanks.

My SYS.....

[device]
Type="HTC Touch HD T8282"
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
popup_info=1
shutdown_time=0
vga=0
[rawdisplay]
highres=0
autoconfig=1
driver="GDI"
[sound]
ding=0
sound_q_length=200
queue_length=200
[config]
autoset2donmap=1
autoset3don****pit=1
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[map]
2dheadup=1
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000
max_poly_segments_shown_1=400 ;makes map drawing a lot faster
min_poly_segments_shown_1=200 ;makes map drawing a lot faster
[3d]
fade_distance_for_car=5
fade_distance_for_guidance_arrow=50
fade_overlap_tolerance=80
[3d_config]
rotated_roadsigns=0 ;názov ulice na ceste horizontalne(0) - otoceny(1)
disable_roadsign_navigation_mode=0 ; nazov v baloniku (0) - nazov na ceste(1)
[roundaboutcam]
enabled=0
centery=50
[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
[power]
powermgm_state=0
backlight_day=100
Backlight_night=65
[poi]
enable_pois_before_080217=1
[tmc]
;port="COM,4"
;source="royaltek"
saved_config_available="1"
[warning]
warn_distances=110:500,80:350,60:300,40:250

I believe youre missing the data.zip file.

Blackcircle · #3 (**permalink**) 01-06-2010, 10:01 PM

Aznmode......
where exactly does data.zip go. I do have it just maybe not in the right place.

martianmarv · #4 (**permalink**) 01-06-2010, 10:17 PM

The "data.zip" goes in the root of the iGo8 folder.

Another thing that may help people with TTS. Once you select the voice that you want, go into the "voice" folder where your content is and move the voice files that are not being used to a different place like storage card or something like that. It seems that when iGo8 loads up, it loads all the voice files even though they are not being used. I tried this and have not lost TTS for over a week. I also noticed the speed of the app dramatically is improved, TTS works like a charm, and I don't get system or GPS lags anymore. I put all the "voice" files back in the "voice" folder to try it out and TTS stopped working when I rebooted the iGo8 app. maybe my phone is doing weird stuff ( i drop my phone a lot and have zapped it a couple times with an ESD gun on accident ).

Anyways, i hope this may help.

**aznmode** · #5 (**permalink**) 01-07-2010, 08:29 PM

Quote:

Originally Posted by martianmarv

The "data.zip" goes in the root of the iGo8 folder.

Another thing that may help people with TTS. Once you select the voice that you want, go into the "voice" folder where your content is and move the voice files that are not being used to a different place like storage card or something like that. It seems that when iGo8 loads up, it loads all the voice files even though they are not being used. I tried this and have not lost TTS for over a week. I also noticed the speed of the app dramatically is improved, TTS works like a charm, and I don't get system or GPS lags anymore. I put all the "voice" files back in the "voice" folder to try it out and TTS stopped working when I rebooted the iGo8 app. maybe my phone is doing weird stuff ( i drop my phone a lot and have zapped it a couple times with an ESD gun on accident ).

Anyways, i hope this may help.

Still no go for TTS. Do you have Lang US PDA version you can post?

niteriderxp · #6 (**permalink**) 01-09-2010, 05:05 AM

Hi,

I have been using the stock VZW TP2 6.1 ROM with TTS working perfectly on iGO. Now that I have upgraded to stock VZW TP2 6.4 ROM, TTS no longer works. I have disabled everything memory hogging and have 111.54MB free.

I am at a loss as to why it worked before in 6.1 and no longer works in 6.5.

Thanks,
Nite Rider

CMeys · #7 (**permalink**) 01-09-2010, 08:17 PM

Quote:

Originally Posted by niteriderxp

Hi,

I have been using the stock VZW TP2 6.1 ROM with TTS working perfectly on iGO. Now that I have upgraded to stock VZW TP2 6.4 ROM, TTS no longer works. I have disabled everything memory hogging and have 111.54MB free.

I am at a loss as to why it worked before in 6.1 and no longer works in 6.5.

Thanks,
Nite Rider

Have tried turning off TouchFlo, the rebooting without it? I was in the same boat as you (TTS worked on stock ROM but not on a 6.5) -- when I do that and reboot without TF then Igo8 TTS works.

navychief52 · #8 (**permalink**) 01-06-2010, 11:59 PM

Quote:

Originally Posted by Blackcircle

I still haven't been able to see this software on my TP2.
Type="HTC Touch HD T8282"
sdcard_dsk_num=7

Try removing these lines and adding

[device]
Type="HTC Touch Pro T7272"
app="%SDCARD%/iGO8"

This of course assumes that you put everything in a folder called iGO8 on the root of your storage card.

If your version supports the Touch HD, then don't bother changing that line. It appears to me that iGO can't find the data store because you identified it as sdcard_dsk_num=7