Originally Posted by shagpal (Post 1303687)

I wana report I am having the same problems. I went to my buddy's metropcs store, ran dmrouter.exe with uOpen with "/DIAG" command, and then plugged the usb cable in, and at first houdini couldn't find the vzw tp2. then we manually searched every com until we found it, com127.

metroflashed fine and successful, phone worked great, but the metropcs internet connection setting wouldn't stay on metropcs. so when I got home, I did a hard reset, and now VZW settings come back. the SID is back to verizon, as well as the prl. changing the SID settting back to metro and updating the prl doesn't help anymore. phone won't call out anymore, and I get a recording, but I still get metropcs when I dial *228 or 611.

I could get it re-metroflashed, but this seems like it'd be a royal pain in the arse to have to do it everytime after flashing to a new rom or doing a hard reset.

I emailed cmonex about the problem, hoping to get some answers.

Originally Posted by starscalling (Post 1306373)

goal is to get all non-personal settings here




[of course there are no - in the actual deal]

epst -> modem settings
slot cycle index -- 2
preferred serving system -- automatic
preferred mode -- automatic
hdr hyprid preferred -- disable
clear all mru entry -- no
hdr mobile receive diversity -- enable
cdma mobile receive diversity -- enable

epst -> prl
update prl file --- blank
prl id --- 02003
prl capability(prl type) -- IS-683C
prl capability(prefer only) Disable
prl capability(default roaming indicator) -- 0

epst -> security
hdr an auth user id(long) -- XXXXXXXXXX@mymetropcs.com [replace X's with your 10-digit phone number]
hdr an auth password(long) -- not telling@!!
ppp user id -- blank
ppp password -- blank

epst -> data parameters
packet dial string -- #777
rev. A -- enable

epst -> phone directory [i'm usa, this may vary]
emergency #1 -- 911
emergency #2 -- *911
emergency #3 -- #911
#1 name -- 112
#1 number -- 112

epst -> M.IP settings
number of profiles -- 6
active user profile index -- 0
mip_mode -- simple ip only
mip registration retries -- 1
mip registration retry timeout -- 2000ms
mip pre-registration timeout -- 30
mobile node-ha authentication -- disable
send a registration request only in use -- enable
dormant handoff optimization -- disable

epst -> M.ip Default Profile
enable profile -- enable
NAI - XXXXXXXXXX@mymetropcs.com [X -> 10-digit phone # again]
mn ha spi set -- enable
mn ha spi value( hex ) -- {not sure if this is personal}
mn aaa spi set -- enable
mn aaa spi value( Hex ) -- {not sure if this is personal}
reverse tunneling preferred -- enable
home address -- 0.0.0.0
primary ha address -- 0.0.0.0
secondary ha address -- 0.0.0.0
ha shared secret -- {not sure if this is personal - dont think so}
AAA shared secret - NOT TELLING!
dmu public key(pkoid) -- 0
mn authenticator( hex ) -- 0

Originally Posted by pimpsuprazx (Post 1305512)

I tried and I gave up, I ended up putting a stock sprint rom back on mine with no issues.

Originally Posted by starscalling (Post 1306538)

well i know this makes a double post but... damn i still cant get this working :/

really disappointed and out 47.50 so far :/

going to try flashing a few roms i suppose... crossing fingers.

Originally Posted by pimpsuprazx (Post 1306691)

how are you out of 47.50

Originally Posted by starscalling (Post 1313424)

gah im at the store right now - re-houdini'd the phone - successfully
the only error message i had to push ok to was the alert for AWS not being compatable with this phone so it would only be able to roam in these markets - im in los angeles so it shouldnt matter... WTF

Originally Posted by shagpal (Post 1313456)

you can update the prl (preferred roaming list) by dialing *228, and then 2 for the programming roaming list option.

if you don't get metropcs when you dial *228, or 611, then you will need to update the prl manually. you can do that by dialing ##778 or ##778#, for verizon or sprint branded phones, and dialing send. that will bring up EPST, which will allow you to browse your memory or memory card for the latest PRL file. the latest that I am aware of is 02003, then after you've updated the prl manually, you should get metropcs, and then dial *228 and reprogram the PRL.

Originally Posted by shagpal (Post 1314562)

okay guys, I wanna report that I flashed the radio to 2.05WU, which is the unlocked 2.05 on the sticky forum here...
http://forum.ppcgeeks.com/showthread.php?t=93865

the new 2.05WU radio flashed fine, just remember to put it into GSM only first before doing that flash.

after flashing up to the latest MightyROM today, I am still having isp connection setting being automatically set to default. so, just outa curiosity, I used QPST to make a small change on the banner. when I tried write the change my VZW TP2, I got the following error from QPST:
"NV Write Errors: (NV Item): "NV_UE_IMEI_I" (Status): "NV_READONLY_S".

my sense is, this, whatever this or it is, it's what is giving us problems with our mobile web/ip/internet connection automatically resetting to default.