|
||||
Re: Bricked, I think? =(
Take the battery out, put it back in, press volume down and End key, then flash a cdma ROM. This worked for me, and seems to work for others.
|
|
||||
Re: Bricked, I think? =(
put the phone in bootloader then try using the relocker. then use the cdma unlocker
__________________
|
|
||||
Re: Bricked, I think? =(
Sorry guys, neither of those will work for me, as I can't get the phone to power on in ANY mode at the moment. As I said, the battery's been out, been charged, and repeated over the last few days, still no signs of life, at all.
|
|
||||
Re: Bricked, I think? =(
What GSM ROM did you flash? If it contained a radio, you are certainly bricked. Most custom ROMs do not contain radios, but phones do power on and continually reboot if you flash a custom GSM (no radio) ROM to a CDMA phone. If it was a shipped/carrier ROM, they all contain radios and you are bricked (not sure if it's possible to flash a shipped ROM made for another device or if the RUU would give an error...).
__________________
|
|
||||
Re: Bricked, I think? =(
Yes, unless you get some sort of equipment (like a JTAG) or somehow replace the memory the ROM is stored on. I think people have recovered using JTAG's, but I'm just going off of what I've read and am not 100% sure.
|
|
||||
Re: Bricked, I think? =(
Call HTC tell them you installed an update from there (HTC.com TP2) web page and the phone now won't turned on. Act like you don't anything about phones essentially like a newbie. They will probably tell you to call later the manufacter company that takes over RMA. And that company will tell you the RMA process.
That's what I did when I bricked my TP2, they replaced the whole motherboard so the IMEI got changed. Good Luck. |
|
||||
Re: Bricked, I think? =(
Quote:
|
|
Tags |
brick, bricked, cdma, n00b, touch pro 2, tp2 |
|
|