## Codes not working?

Unknownforce · #1 (**permalink**) 03-02-2010, 01:02 PM

Just got my Sprint TP2 two days ago, moved over from a Sprint TP, so I know pretty much all about it... But here's my problem... none of the ##code#'s are working... like ##33284# just sits there, nothing ever comes up. It worked BEFORE unlocking/flashing. I also tried the VZW type codes, (##33284 SEND) but also no luck, it just clears out the entry and goes back to the dialer. I want to try some new radio's and see what works best for my area, but I need the debug info from it to see actual signal strength and whatnot...

Here's what I've done so far... Unlocked HSPL, flashed to Engery's latest titanium ROM, disabled Titanium, installed SPB Mobile Shell and S2U2 2.30.

Is there anything that would cause it to be disabled, is it possible I need to run a carrier cab or something? If so can someone provide a link?

Thanks.

**gTen** · #2 (**permalink**) 03-02-2010, 01:13 PM

http://www.ppcgeeks.com/forums/showp...05&postcount=1

Unknownforce · #3 (**permalink**) 03-02-2010, 01:25 PM

What does finding my MSL have to do with the ## codes not working... unless I'm supposed to do something else afterwards WITH the MSL?

nyclio · #4 (**permalink**) 03-02-2010, 01:34 PM

Make sure HTC dialer is enabled

-'HKEY_LOCAL_MACHINE / Security / Phone / Skin'
-change the value of 'Enabled' from 0 to 1.

Unknownforce · #5 (**permalink**) 03-02-2010, 01:36 PM

Quote:

Originally Posted by nyclio

Make sure HTC dialer is enabled

-'HKEY_LOCAL_MACHINE / Security / Phone / Skin'
-change the value of 'Enabled' from 0 to 1.

Already set to 1. Still nothing... Thanks though.

**nxtech3** · #6 (**permalink**) 03-02-2010, 01:37 PM

I havent used Energy, but i know on Mightys i had to run the carrier cab before i could get the ## codes to work, so give it a shot

**mwalt2** · #7 (**permalink**) 03-02-2010, 01:39 PM

Quote:

Originally Posted by Unknownforce

Just got my Sprint TP2 two days ago, moved over from a Sprint TP, so I know pretty much all about it... But here's my problem... none of the ##code#'s are working... like ##33284# just sits there, nothing ever comes up. It worked BEFORE unlocking/flashing. I also tried the VZW type codes, (##33284 SEND) but also no luck, it just clears out the entry and goes back to the dialer. I want to try some new radio's and see what works best for my area, but I need the debug info from it to see actual signal strength and whatnot...

Here's what I've done so far... Unlocked HSPL, flashed to Engery's latest titanium ROM, disabled Titanium, installed SPB Mobile Shell and S2U2 2.30.

Is there anything that would cause it to be disabled, is it possible I need to run a carrier cab or something? If so can someone provide a link?

Thanks.

I've made you a cab to try. It has the EPST files because I have no idea if nrg puts them in his rom and the registry entry below (the dialer he is using is GSM, so won't work with ## codes without making the change below - also won't ever dial 911 correctly as far as I know).

Code:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DialParser]
"DLL-OEM"="PhoneCanvas.dll"

If the cab doesn't work, it should uninstall.

Unknownforce · #8 (**permalink**) 03-02-2010, 01:54 PM

Quote:

Originally Posted by mwalt2

I've made you a cab to try. It has the EPST files because I have no idea if nrg puts them in his rom and the registry entry below (the dialer he is using is GSM, so won't work with ## codes without making the change below - also won't ever dial 911 correctly as far as I know).

Code:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DialParser]
"DLL-OEM"="PhoneCanvas.dll"

If the cab doesn't work, it should uninstall.

Ran the attached cab with a little luck... ##778# works now, but ##33284# still does not...

**00_MACKIE_00** · #9 (**permalink**) 03-02-2010, 02:01 PM

Quote:

Originally Posted by Unknownforce

Ran the attached cab with a little luck... ##778# works now, but ##33284# still does not...

What is ##33284 for Sprint, never heard of it. Just tried it and it works on MightyRom WAR latest release.

**mwalt2** · #10 (**permalink**) 03-02-2010, 02:03 PM

Quote:

Originally Posted by Unknownforce

Ran the attached cab with a little luck... ##778# works now, but ##33284# still does not...

Ok, sorry about that. I should have read the reg. entries for epst better

. Try the cab attached to this post. All ## codes should work now.

Quote:

Originally Posted by 00_MACKIE_00

What is ##33284 for Sprint, never heard of it. Just tried it and it works on MightyRom WAR latest release.

It runs fieldtrial.exe apparently

.