help unlocking mogul spc/msl code

[bunvilla]

here is how u get the code to unlock the phone to set it up with another carrier but i havent found a way yet to delete the stuff in the extrom/ thats a different issue /hope this helps


HOW TO GET YOUR SPC or MLS CODE from a QWEST/SPRINT 6800 MOGUL easily
Found the post at ppcgeeks which worked excellent for me in getting my spc or mls code

Someone want to verify a different way to get MSL?
I was playing about with my Sprint Mogul and found a couple of ways to get your MSL... They basically both get it the same way, just take different routes to get there.

Two different ways to get MSL:

Method A:

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r

* The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows.

Method B:

* Start your favorite pocket-pc terminal program (like pocketPutty - http://www.pocketputty.net/)
* Connect to com9 (Putty used default speed of 9600)
* type in AT+HTC_RMSL=0 and hit enter, your MSL will be displayed.
* Soft reset to restore phone functionality

Let me know if it works for you...

Thanks,

Geoff

--------------------------------------------------------------------------
THE FIRST OPTION WORKED EXCELLENT and i didnt have to install anything or take a chance of messing my phone up.
this rocks thought i would share it/ I CANT TAKE CREDIT FOR IT got it from ppcgeeks

http://forum.ppcgeeks.com/showthrea...9&highlight=spc

[bunvilla]

did this help?????

[dirtdevil4386bd]

i followed the steps of the 2nd one and it didnt show the msl
what it showed was:
$HTC_CSQ: 3,3
$HTC_CSQ: 1,3
$HTC_CSQ: 1,4
$HTC_CSQ: 1,3
and so on
please get back to me thanks!!

Originally Posted by bunvilla

here is how u get the code to unlock the phone to set it up with another carrier but i havent found a way yet to delete the stuff in the extrom/ thats a different issue /hope this helps


HOW TO GET YOUR SPC or MLS CODE from a QWEST/SPRINT 6800 MOGUL easily
Found the post at ppcgeeks which worked excellent for me in getting my spc or mls code

Someone want to verify a different way to get MSL?
I was playing about with my Sprint Mogul and found a couple of ways to get your MSL... They basically both get it the same way, just take different routes to get there.

Two different ways to get MSL:

Method A:

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r

* The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows.

Method B:

* Start your favorite pocket-pc terminal program (like pocketPutty - http://www.pocketputty.net/)
* Connect to com9 (Putty used default speed of 9600)
* type in AT+HTC_RMSL=0 and hit enter, your MSL will be displayed.
* Soft reset to restore phone functionality

Let me know if it works for you...

Thanks,

Geoff

--------------------------------------------------------------------------
THE FIRST OPTION WORKED EXCELLENT and i didnt have to install anything or take a chance of messing my phone up.
this rocks thought i would share it/ I CANT TAKE CREDIT FOR IT got it from ppcgeeks

http://forum.ppcgeeks.com/showthrea...9&highlight=spc

Thank you sir! Using the reg edit solution i was able to get my spc! THANK YOU!!

[dahand]

Originally Posted by jammis

Thank you sir! Using the reg edit solution i was able to get my spc! THANK YOU!!

I do not know how to connect to com9 using pocket putty. Can you please elaborate?

[parag0nn]

Originally Posted by dahand

I do not know how to connect to com9 using pocket putty. Can you please elaborate?

Change the protocol to "Serial" (as opposed to SSH or Telnet). The "Host Name" text area will then change to "Serial line" and you will enter "COM9:" there then open the connection.

[flyers2114]

Originally Posted by parag0nn

Change the protocol to "Serial" (as opposed to SSH or Telnet). The "Host Name" text area will then change to "Serial line" and you will enter "COM9:" there then open the connection.

Did you happen to look at the date of the OP on this.....lol

[jhgas]

Originally Posted by parag0nn

Change the protocol to "Serial" (as opposed to SSH or Telnet). The "Host Name" text area will then change to "Serial line" and you will enter "COM9:" there then open the connection.

Hey, thanks a lot, I was looking for that same answer, now I can open the terminal, but it won´t let me input the mentioned string "AT+HTC_RMSL=0" it just sits there in a black screen that says com9 - putty on the top, and has the tools menu on the bottom.

any help?

Thanks

[joeycortes611]

Originally Posted by jhgas

Hey, thanks a lot, I was looking for that same answer, now I can open the terminal, but it won´t let me input the mentioned string "AT+HTC_RMSL=0" it just sits there in a black screen that says com9 - putty on the top, and has the tools menu on the bottom.

any help?

Thanks

I am having the same problem can u guys please help?

Originally Posted by joeycortes611

I am having the same problem can u guys please help?

Its actually connected, although there is no local echo or anything. Just carefully type in what your supposed to and your msl will be the only thing thats displayed when you hit enter. I'm trying to figure out how to get echo on.