Pri 1.4.0 is here FOR ROOTED USERS

[Riley]

Originally Posted by gmaine02

Ok i tried the ##3282## about five times didnt work.So i tried ##786## and it worked on the first time im getting much better 3g speeds.with 1.34 i was getting around 500-600kb maxed i got 1,500kb easily on 1.40.btw did this on calkulins evio 1.1


My question is this:i have a nand backup from a couple days ago with pri 1.34 if i restore that back up will the 1.40 pri still stick or will it revert back to 1.34?

ps just posted this at xda so sorry if you re-reading this

From my experience, you can restore a nand backup and retain 1.40. I just updated pri last night, performed a nand backup just to be safe, then restored a previous nand from several days ago. 1.40 remained through this. I cannot guarantee your experience will be the same, but you should be fine.

[Rager02]

Yup it stayed atv1.40 thanks.

Originally Posted by rileyd5

From my experience, you can restore a nand backup and retain 1.40. I just updated pri last night, performed a nand backup just to be safe, then restored a previous nand from several days ago. 1.40 remained through this. I cannot guarantee your experience will be the same, but you should be fine.

Sent from my Evo using Tapatalk.

[fsp48]

Well, that update has got to have been the most annoying challenge to get. I finally got mine following the bounty post( http://forum.xda-developers.com/showthread.php?t=748392 ) at xda using AmonRa v1.7.0.2 recovery and the stock 2.2 netarchy rom. I did go back to Calkulins EViO 2.1 for a try to instigate the OTA which it did and I just let it sit there while I read more until it either went away on it's own or due to a text coming in. I jumped to damageControl 3.5 for some tries and then settled to just following the XDA post for I think 3 tries. The 1st try I did do the offered update to voicemail and then stayed with the repeat of ##786# and did the wipe in the same order as posted. This last time that it finally worked I skipped setting up my gmail. I just figured I would post my results to see if there was something that stood out that may be a trigger for it working for anyone that has had no luck yet. I was seriously ready to throw in the towel. Good luck.

[DumbAssEvo]

Question, once I enter ##768# and enter my msi# it says something like please wait configuring. It just keeps running and never does anything. Do I suppose to navigate away from this and boot into recovery? Or do I suppose to wait forever?

[Carla]

Originally Posted by DumbAssEvo

Question, once I enter ##768# and enter my msi# it says something like please wait configuring. It just keeps running and never does anything. Do I suppose to navigate away from this and boot into recovery? Or do I suppose to wait forever?

I had that happen once, where it seemed to not be doing anything. I just pulled my battery after a little bit and when I put it in it did it's thing. That's just me though, I am impatient.

[Ticklemepinks]

Originally Posted by CarlaDarla

I had that happen once, where it seemed to not be doing anything. I just pulled my battery after a little bit and when I put it in it did it's thing. That's just me though, I am impatient.

so hun did u get it to work????

[DumbAssEvo]

I still cant get the pri to update. Its going on day 3 for me. I'm running OMJ's latest rom. I flashed to another rom and after putting ##786# in it finally rebooted. I have done this several times. I have even done all the wipes and still no dice.

I think it may have something to do with running the proper kernal? Maybe it needs to be a stock one. I dunno but it sure would be nice just to be able to flash this pri update... I'm done with it for a little while.

It sucks because my data speed is so slow. Before it used to be screaming fast..

[Rager02]

It has nothing to do with rom or kernel imo.Mine worked on netarchy kernel and calkulin rOm.

Originally Posted by DumbAssEvo

I still cant get the pri to update. Its going on day 3 for me. I'm running OMJ's latest rom. I flashed to another rom and after putting ##786# in it finally rebooted. I have done this several times. I have even done all the wipes and still no dice.

I think it may have something to do with running the proper kernal? Maybe it needs to be a stock one. I dunno but it sure would be nice just to be able to flash this pri update... I'm done with it for a little while.

It sucks because my data speed is so slow. Before it used to be screaming fast..

[rkiechle]

OK go figure, it took me longer to get my MSL than it did to get PRI 1.4 (seriously the people on the phone are programming sensitive... first 1 started asking me a ton of questions, so i just hung up and called back, then gave the i am trying to reset my phone back to factory because it keeps dropping calls and now it wants my MSL... finally got it... )

I was running OMJ's latest ROM and it went through first time using the ##786 method, and pulled the battery when screen went blank... and followed the rest of that post's directions...

I won't be in the city until Monday, so no 4G to check... but so far 3G seems more stable.. holding 1+ instead of the normal 700+

[Carla]

Originally Posted by Ticklemepinks

so hun did u get it to work????

No