How to: get your Radio Back! :D
I'm one happy 6700'er now that I've got my RADIO back on my phone. It's easy. REAL EASY. Don't spend time flashing/reflashing or tossing your phone around like monkeys throwing poo... All ya gotta do is this: Go here: (requires registration) http://wiki.xda-developers.com/index...0Boot%20Screen Or do this (I slightly modified for 6700)- 1. Take out the SD card 2. Opened ActiveSync and go to file, connection setting and Un-check "Allow USB Connections". Then press Ok and close ActiveSync 3. Put in bootloader mode (Power + Record + reset) which brings up the "un-backlit" screen with "Serial" at the top and v0.XX at the bottom 4. Plug in USB cable DIRECTLY from PC to Phone (MAKE SURE NOT TO USE A USB HUB). You MIGHT then see a warning window complaining that an "Unsigned" device driver is being attempted to be installed. You will be prompted to either "STOP INSTALLATION" or "CONTINUE ANYWAY" - this warning can be safely ignored and so just click on "CONTINUE ANYWAY". 5. Open mtty utility / software (http://rapidshare.com/files/27028426...2_538.rar.html) 6. Select USB from the "Port" drop-down on the upper left corner of the dialog box and hit OK 7. Then another screen will come up. Hit enter and that will show "USB>" 8. Type exactly "set 14 0" and hit enter. You will see some jibberish on the mtty utility which will again be suffixed by "USB>". Your 6700 will not seem to have done anything and should still indicate "USB" at the top, and "v2.01" (or equivalent) at the bottom. You can now close the mtty utility. 9. On the Desktop PC unplug the USB cable and re-plug it into the exact same USB port again. From this point onwards, you must use this exact same USB port to flash the ROMs of your phone because failure to do so will most proably result in "Connection Errors" at the beginning of the flashing process when the RUU attempts to establish communication with your Universal. After re-pluging into the USB port, you can then run the ROM update APA_SPCS_20600_303_12700_WWE_Ship.exe (or latest version - CARRIER SPECIFIC) 10. It will go through the upgrade process with the 3 steps and "completed successfully" on the PC 11. wait until 100% complete 12. Then do a Hard Reset with the two "-" buttons and the soft reset button. 13. Press "Y" and then it starts to boot
__________________
Microsoft, Helmi_C, No2Chem, NexVision, tiermann, Colonel, gguruusa, luv2chill, imcokeman, jakdillard...many others. Thank you. We are all on shoulders of giants.
What's in a name? That which we call a genius by any other name would be just as smart. I beat up Sprint and all I have to show for it is this lousy When you were in diapers and wetting the sheets I was out hacking with the ppcgeeks. |
Good find. Did you not have to kill the two processes with Task Manager before the Bootloader step?
__________________
Kitchen updates at www.ppckitchen.org and you can get BuildOS help Here
If you have been helped by me or would like to support developers like Olipro, helmi_c, and others please feel free to Donate ALWAYS FLASH BACK TO YOUR CARRIER'S OFFICIAL ROM BEFORE TAKING YOUR PHONE IN FOR SERVICE OF ANY KIND |
|
||||
I was talking about this:
Quote:
http://www.geekzone.co.nz/inane/1119 Obviously these are different processes, but it might cause issues down the line so I am putting it here for future readers. |
|
||||
No one needs to kill processes before doing this. Following the 13 steps above will be all that is needed. Anything else will just add unnecessary complexity to the issue.
This has been tried and verified. |
|
||||
You just saved me from having to ship this to UT or claim it on insurance. Thanks you. I want to insert this text to people can find it easier "a wireless radio must be attached to use the phone" Here is the answer!!
Thanks Raging |
|
||||
This also worked for me. My Radio quick working consistently, and then completely, after I called *2 (Sprint Customer Service) to change my wifes phone and it forced an automatic update to my PPC-6700. I'm assuming that the update was a PRL change. Sprint was absolutely no help in fixing the problem. I was about to send it into UT since I have about 3 months left on my warranty when I found the above solution late last night. I was going to update my original post until I seen Raging Idiots post. Great Job Raging Idiot!!
Once I got a complete re-install with the stock roms I'm was back in business and now I'm waiting for Colonel's new 2.6 core AKU release!!!???!!! |
|
|
|