Total noob question (I searched 1st)

[soIsezto'emIsez]

BTW, whenever I search for anything, I get this:

"The search term you specified (to) is under the minimum word length (3) and therefore will not be found. Please make this term longer."

Even if I use 5 words. Weird.

Anyway, I bought a used PPC-6700 and it has WM6 on it. According to the Device info it is ROM version 3.50.00 WWE, ROM date is 4/25/07.

Anyway, I want to switch my service to this phone but I've read that I can't do this unless I flash back to WM5 because the WM6 won't supprt the ## commands that are necessary to program for the ESN switch. Is that true? The guy I bought it from said WM5 is on the storage card, but how do I do it (if I indeed need to do it)? Thanks.

[OMJ]

Originally Posted by soIsezto'emIsez

BTW, whenever I search for anything, I get this:

"The search term you specified (to) is under the minimum word length (3) and therefore will not be found. Please make this term longer."

Even if I use 5 words. Weird.

Anyway, I bought a used PPC-6700 and it has WM6 on it. According to the Device info it is ROM version 3.50.00 WWE, ROM date is 4/25/07.

Anyway, I want to switch my service to this phone but I've read that I can't do this unless I flash back to WM5 because the WM6 won't supprt the ## commands that are necessary to program for the ESN switch. Is that true? The guy I bought it from said WM5 is on the storage card, but how do I do it (if I indeed need to do it)? Thanks.

Try using a * when searching if you get that error.

I have also heard that about switching your service to a WM6 apache, but I can tell you I am running WM6 & can use the ## cmds.

If you want to be safe, go to UTSTAR & download the latest official WM5 ROM for your carrier, then get your service working, then grab Verizonguys WM6 kitchen & start cookin/flashin.

http://www.utstar.com/pcd/view_phone...&bID=30&sAct=0

[guitardoc64]

The ## cmnds are part of the phone service and shouldn't be affected by the software being used in the phone. I just verified the ## with my WM6 6700, and they work fine.You should still flash to a stock ROM if you have to take the phone in for an esn swap.

[soIsezto'emIsez]

The search won't work for me even when I use a *.

Anyway I called Sprint to switch my service to the 6700 and they did the ESN switch, then we went to program it and NONE of the ## commands work. It just sits there on the dial screen like a normal phone entry.

So I went to the storage card to flash back to the original ROM and I see 'Mobile 6 ROM' and 'Stock ROM from HTC' there. If I click on either one of them I get an error message saying "[insert ROM name here] is not a valid Pocket PC application". So I can't do anything. I hope I don't have to factory reset this thing. Anyone heard of this?

And again, I am trying to search, I can't make it work.

[guitardoc64]

Originally Posted by soIsezto'emIsez

The search won't work for me even when I use a *.

Anyway I called Sprint to switch my service to the 6700 and they did the ESN switch, then we went to program it and NONE of the ## commands work. It just sits there on the dial screen like a normal phone entry.

So I went to the storage card to flash back to the original ROM and I see 'Mobile 6 ROM' and 'Stock ROM from HTC' there. If I click on either one of them I get an error message saying "[insert ROM name here] is not a valid Pocket PC application". So I can't do anything. I hope I don't have to factory reset this thing. Anyone heard of this?

And again, I am trying to search, I can't make it work.

Okay. Starting easy here. You'll need to fet the ROMS off the card and into your PC first. They won't flash from the card, but have to come thru the upgrade utility/USB port. Once done with the transfer of the files to a PC, then hard reset. If you got WM6 on there it's a little red icon in programs called clear storage, otr just hold down the two - softkeys and poke the reset. It will ask yes or no. Choose yes. Wait, go thru the setup and try putting in ##(the msid the Sprint tech gave ya)# on the phonepad. You should get the program screen with the 3 green dots. If that doesn't work, go to the FTP or the UTStarcomm site and download the stock Sprint ROM and flash it to the handset. Then call Sprint to get it activated. While you're getting it activated, take notes on the codes. They'll come in handy later. Once you have it working on your line we can set to hacking. Good luck.

[weedahoe]

Originally Posted by soIsezto'emIsez

Anyway, I bought a used PPC-6700 and it has WM6 on it.

Out of curiousity, where did you buy it from and how much?

[soIsezto'emIsez]

Originally Posted by guitardoc64

Okay. Starting easy here. You'll need to fet the ROMS off the card and into your PC first. They won't flash from the card, but have to come thru the upgrade utility/USB port. Once done with the transfer of the files to a PC, then hard reset. If you got WM6 on there it's a little red icon in programs called clear storage, otr just hold down the two - softkeys and poke the reset. It will ask yes or no. Choose yes. Wait, go thru the setup and try putting in ##(the msid the Sprint tech gave ya)# on the phonepad. You should get the program screen with the 3 green dots. If that doesn't work, go to the FTP or the UTStarcomm site and download the stock Sprint ROM and flash it to the handset. Then call Sprint to get it activated. While you're getting it activated, take notes on the codes. They'll come in handy later. Once you have it working on your line we can set to hacking. Good luck.

Got it working! It was stuck in that boot loader mode the first tome but I checked the noob thread and it said just to try and reflash it and it worked! So I got the service switched no problem. I suppose now I'll put the WM6 back on it. Any suggestions? I'll be checking the noob thread of course.

Thanks for the explanation guitardoc. I know it's a pain when a noob comes on and doesn't know anything so I appreciate it.

Originally Posted by weedahoe

Out of curiousity, where did you buy it from and how much?

I got it in the trading post at Sprintusers. Traded my a920 plus some cash for it.

[guitardoc64]

Originally Posted by soIsezto'emIsez

Got it working! It was stuck in that boot loader mode the first tome but I checked the noob thread and it said just to try and reflash it and it worked! So I got the service switched no problem. I suppose now I'll put the WM6 back on it. Any suggestions? I'll be checking the noob thread of course.

Thanks for the explanation guitardoc. I know it's a pain when a noob comes on and doesn't know anything so I appreciate it.



I got it in the trading post at Sprintusers. Traded my a920 plus some cash for it.

Not a problem soIsezto'emIsez, De nada. I was in your shoes before, and was helped by this forum and it's members. This is what it's here for. I help where I can.

BTW still got my a920. sweet little phone, when it's not crashing.....

[guitardoc64]

Here's my somewhat-noob question about the WM6 V4 kitchen and dialers. I haven't had success substituting other dialers for the WM6 touch dialer. I don't like the Touch Dialpad, and want to use the crossbow/smartdial from the 3.5 kitchen. Some error about an up arrow stops build OS in the creating registry step. (itncompatible?) I've seen some using other dialers with this kitchen but are they added after the flash? Or as an OEM?

[OMJ]

I've been using this big button dialer for awhile now, much better than the stock dialer, plus it fixes the data arrow issue.

ftp://ppcgeeks:ezupload@up.ppcgeeks....ton_Dialer.cab