Apache WM6.1 Build 20748 Kitchen

[Robtao]

Modem Link is listed twice, with an opening message for duplicate Guid. The Wmodem selection forces the first one to be selected.
No big deal.

[jabu]

HTC Audio Manager won't launch. Says to re-install it. D3D driver still doesn't work. Whole build bogs down my phone, guess I'll try a naked install.

[kevdawg]

Originally Posted by jabu

HTC Audio Manager won't launch. Says to re-install it. D3D driver still doesn't work. Whole build bogs down my phone, guess I'll try a naked install.

Same here. I've tried re-flashing several times already and have had no luck.

[Todd D.]

OK, so very new, first kitchen, probably a dumb question with an easy fix but I've looked everywhere and can't find anything. After cooking this up and adding some from the PPCKitchen_OEM.rar pack, several apps and games simply won't run. I get a 'cannot be opened. Either it is not signed with a trusted certificate, or one of its components can not be found'

Is this a normal error? Is there a registry fix or something that will allow it to run unsigned apps?

Thanks for the help.


EDIT: NM, installed .netCF and everything appears to work fine. SORRY!

[Maxx134]

Originally Posted by sunkid

I have not been able to fully sync my Exchange server accounts email with my VX6700. ...
UPDATE 10/2/2008.2: *facepalm* It turns out, my problem was the result of a couple of largish emails (text only) in my Inbox. After deleting those, syncing now happily happens. I am leaving this post in place, just in case anyone else stumbles across this. I certainly did not find much on the Google (or the cuil for that matter )....
!!

I think the default settings limit email size to a selectable amount, so check your email size setting to prevent future jam ups.

Originally Posted by sykosoft

I continue to have the same issues with .net cf 3.5. It is NOT in there by default. I removed buildos completely 100%, reinstalled, used a stock selections, and .net 3.5 was not installed. Nor is it listed as an OEM.
I reinstalled today, so I made sure to get the latest updates.
Ideas?
Michael

Ideas Yes, make shure your selections file you are using is using proper files.. Select the "Apache_WM6.1_20748 Selections" file.
If you have multiple Builds and rename original selections files, then you may not actually be using the correct build.... REDOWNLOAD selections file.

ALSO,If you goto:
C:\Program Files\PPCkitchen.org\BuildOS\Kitchens\SYS_20748_Ap ache.rar you will actually see the "NetCF3.5" folder is there ...........soooooo as stated a few hundred posts back, there are some progs that need 2.0 if still dont work under 3.5, so just check that one in kitchen...

Originally Posted by Todd D.

OK, so very new, first kitchen, probably a dumb question with an easy fix but I've looked everywhere and can't find anything. After cooking this up and adding some from the PPCKitchen_OEM.rar pack, several apps and games simply won't run. I get a 'cannot be opened. Either it is not signed with a trusted certificate, or one of its components can not be found'
Is this a normal error? Is there a registry fix or something that will allow it to run unsigned apps?
Thanks for the help.
EDIT: NM, installed .netCF and everything appears to work fine. SORRY!

Either you haven't re-downloaded the latest kitchen files which were updated to have 3.5, or you are using a selections file that is not using newest files BECAUSE if you added the 3.5 OEM in your folder and selected it, then when cooking, the Build OS program would tell you it already exists and ask you to overwrite it...

Originally Posted by ronjay007

I am attempting to get some help resolving this issue
Error building default HIVES
Here is the last few lines of my output
importing registry file ".\Registry\f0a663cd-4273-4004-acd1-3740325c4725.rgu"...
importing registry file ".\Registry\f0b07cd0-fec4-4303-b683-41ddcbf78917.rgu"...
importing registry file ".\Registry\fd5395e8-ad70-4fb7-9ced-16b79aef2edf.rgu"...
importing registry file ".\Registry\ff1dcb21-efff-4a57-8d60-dbb09e72cccd.rgu"...
importing registry file ".\Registry\fffff57e-cd05-41bb-bb39-232aac902d6f.rgu"...
importing registry file ".\Registry\e7cc4160-b5bb-11db-abbd-0800200c9a66.rgu"...
wmain: (RGUComp) !ERROR failed building DEFAULT hives
Any help would be greatly appreciated

The Build prog lists this so YOU can see where it got messed up... In YOUR case it looks like it stopped at the resistry. You did not list what it said after, as it will actually say how many lines down in that rgu/reg file.. looks like it stopped at the OEM that has file rgu GUID"e7cc4160-b5bb-11db-abbd-0800200c9a66.rgu" , but since you did not paste ending (not whole list) this is just a GUESS where it actually STOPPED...
Usually happens with custom reg entries that are not correctly entered.
Find which OEM folder has the offending file by checking the GUID just stated... If yours, then edit & fix it.
IF it is an OEM from any of the kitchen rar, then you have a corrupt rar. so re-download that kitchen file.

Originally Posted by mellon

i just cannot download the oem files by using the updater. i keep it there for about 20 minutes and get a response saying"the buildOS file cannot be copied." i log on ppckitchen.org, and find nothing but a few user-posted OEMs.
help is appreciated!

I had a similar issue. I think it is because of newer links. I dunno why but in any case, just go2 first post of this thread and re-download BuildOS installer.
Uninstall your copy. Your folders "PPCkitchen" and "kitchen" with files will not be removed but thats ok. I would take out kitchen files and download fresh ones, as PPCGeeks rar is no longer used, replaced by PPCKitchen.rar...
If you have vista and want it to be a fresh install, you will want to delete folder with Temp files here:
C:\Users\"Your Name"\AppData\Roaming\hIq Inc
Dont worry your password is not deleted there.
Now re-install and run updater all should be well.

[sykosoft]

Originally Posted by Maxx134

Ideas Yes, make shure your selections file you are using is using proper files.. Select the "Apache_WM6.1_20748 Selections" file.
If you have multiple Builds and rename original selections files, then you may not actually be using the correct build.... REDOWNLOAD selections file.

ALSO,If you goto:
C:\Program Files\PPCkitchen.org\BuildOS\Kitchens\SYS_20748_Ap ache.rar you will actually see the "NetCF3.5" folder is there ...........soooooo as stated a few hundred posts back, there are some progs that need 2.0 if still dont work under 3.5, so just check that one in kitchen...

I looked in the RAR, and yes, I did see the folder. However, I assure you, no matter how many times I build, it is not there. .netCF3.5 ONLY installed when I made an oem out of the cab and included it in my build.

I am also definitely using the latest kitchen files.

Michael

[mikeklemz]

Originally Posted by Maxx134

ALSO,If you goto:
C:\Program Files\PPCkitchen.org\BuildOS\Kitchens\SYS_20748_Ap ache.rar you will actually see the "NetCF3.5" folder is there ...........soooooo as stated a few hundred posts back, there are some progs that need 2.0 if still dont work under 3.5, so just check that one in kitchen...

.net cf 3.5 is installing fine on mine using 20748... check the rar as he suggested... if you still dont believe, try pulling out the folder and adding it as a patch...

[davepmer]

Still unable to find bluetooth problem. As for the first screen alignment screen, that will work correctly if NetCF 3.5 is used instead of NetCF 2.0

[Pir8Man]

I had to manually install PPCkitchen.rar. but I finally got into testing this build. I received the mentioned duplicate for ModemLink... here they are:
Apache_Core.rar\SYS\MODEMLINK
SYS_20748_Apache.rar\MODEMLINK

just an oversight by ppckitchen.

I removed it from Apache_Core.rar. (wild guess)

[Trident]

I'm still having to Align screen manually; no big deal.
But I haven't been able to get it to sync using A/S yet. On my third flash.
That is a problem.
Is there something that needs to be included to make this work?

--------------
Made a few changes... don't remember exactly what, but I know one of them was the HTC Networking and now I'm syncing.

One other thing I noticed- when I make changes to S2U2 settings, I get an error. I'm guessing that it's because it's trying to save settings to a place that it doesn't recognize. Any way to work around this?
If not, can anyone provide the S2U2 final released version in CAB form so I can install it after another flash without it?

-----------------------------
Looks like I was optimistic too early.
I got a little further in the syncing process, but got stuck while "looking for changes". I soft reset when it hung on Attention required for OneNote and as soon as I did, I got the message about combining or replacing my data. But by that time, it was too late. Now when I connect the USB cable it just tries to connect and fails.