PPCGeeks
Page 4 of 43 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Apache Development (http://forum.ppcgeeks.com/forumdisplay.php?f=53)
-   -   Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308 (http://forum.ppcgeeks.com/showthread.php?t=20492)

midniteslice 03-12-2008 11:00 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by colonel (Post 213940)
A week or two ago, Prime Contact went commercial. I was in the process of updating the OEM, but ran into a few issues. I will get it updated at some point, but it will not dial from the selected contact. If you need, you can just install the cab and it should function for the time being. Or you can build with the PocketCM OEM.
HA! i post, i head to xda to look into the prime contact thing. i come back and theres your answer! why can't commercial tech support be as good as ya'll. thank you colonel.

Trident 03-12-2008 11:07 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
1 Attachment(s)
You guys are tricky. Past Kitchens all installed in the same directory and would incorporate my custom OEMs and files into the file structure.
This time I had to hunt around to find them. I'm still getting some wierd errors and haven't been able to build a ROM small enough yet, but I'm getting close.
Not so close. I've got this ROM pretty stripped down and it still says I need to remove over 3mb (if I'm reading that Hex correctly).
Selections and log attached. Any advice appreciated.

colonel 03-12-2008 11:10 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by Trident (Post 213969)
You guys are tricky. Past Kitchens all installed in the same directory and would incorporate my custom OEMs and files into the file structure.
This time I had to hunt around to find them. I'm still getting some wierd errors and haven't been able to build a ROM small enough yet, but I'm getting close.
What issues are you having? You should be able to put your OEMs in to User_OEM. What did you have to hunt for?

Yes, size is an issue. Unfortunately that is the burden the Apache user must carry. WM6+ is larger as we have seen. And, if you have a new bootloader, your ROM partition is reduced even more.

m2maynard 03-12-2008 11:11 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by gguruusa (Post 213927)
sorry, no. I'll look into it. Don't hold your breath.
anyway to bypass the login? i have tried multiple user names with and without passwords. still getting same error. without pass getting "Unable to open User Config"

gguruusa 03-12-2008 11:11 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
yes, the file locations of older kitchens has been abandoned. Many of the files from the older kitchens are not compatible either.

gguruusa 03-12-2008 11:19 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by m2maynard (Post 213981)
anyway to bypass the login? i have tried multiple user names with and without passwords. still getting same error. without pass getting "Unable to open User Config"
The login is required. Trying mutliple username/password combinations doesn't do anything but create clutter.

Trident 03-12-2008 11:20 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by colonel (Post 213980)
What issues are you having? You should be able to put your OEMs in to User_OEM. What did you have to hunt for?

Yes, size is an issue. Unfortunately that is the burden the Apache user must carry. WM6+ is larger as we have seen. And, if you have a new bootloader, your ROM partition is reduced even more.
The kitchen is overwriting many files (less now that I changed some selections)- most seem to be image files for the dialer?
My old AlarmClock OEM doesn't seem to get recognized properly.
I had to hunt for the new file directory. Not a big deal at all.

No new bootloader...
My post above is amended with files- any suggestions appreciated.

m2maynard 03-12-2008 11:22 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by gguruusa (Post 213998)
The login is required. Trying mutliple username/password combinations doesn't do anything but create clutter.
True...sorry. figured with a proxy that it wasnt going thru anyway. only tried 2 diff usernames....m2maynard....m2....hopefully didnt clutter too much.

any port info that could be provided?

SpeedyXPwizard 03-12-2008 11:23 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Hi all
I downloaded the buildos.msi and installed. Ran the updater and installed all update. When I run buildos and login I get "BuildOS Version BuildOS v.09.05.2(03/03/2008 ) has expired"
I'm on XP pro.

gguruusa 03-12-2008 11:29 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by Trident (Post 213999)
The kitchen is overwriting many files (less now that I changed some selections)- most seem to be image files for the dialer?
My old AlarmClock OEM doesn't seem to get recognized properly.
I had to hunt for the new file directory. Not a big deal at all.

No new bootloader...
My post above is amended with files- any suggestions appreciated.
What do you mean by "doesn't seem to get recognized properly?"

The overwriting is a warning...buildos doesn't know what they are, and in some circumstances overwriting is both unintended and deleterious. A future release will avoid/reduce the multiple popups issue.

gguruusa 03-12-2008 11:34 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by m2maynard (Post 214008)
True...sorry. figured with a proxy that it wasnt going thru anyway. only tried 2 diff usernames....m2maynard....m2....hopefully didnt clutter too much.

any port info that could be provided?
Yeah, I checked...it's only creating clutter on your end :-)

I'll let you know on the proxy/port thing...no time to look it up right now.

gguruusa 03-12-2008 11:37 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by mellon (Post 213905)
still the same problem
Check your PM, please. This issue should be resolvable with your help.

kevdawg 03-12-2008 11:41 AM
Updater.exe and x64
 
Hey guys,

I've just tested this on two x64 machines. I don't have a x32 machine available at this moment but i cannot run updater.exe. Is it compatible with x64?

imnuts 03-12-2008 11:44 AM
Re: Updater.exe and x64
 
Quote:
Originally Posted by kevdawg (Post 214060)
Hey guys,

I've just tested this on two x64 machines. I don't have a x32 machine available at this moment but i cannot run updater.exe. Is it compatible with x64?
It's working fine on Vista x64 for me. I have to start BuildOS as Administrator to get everything to work right, but I haven't had a problem other than that.

kevdawg 03-12-2008 11:46 AM
Re: Updater.exe and x64
 
Quote:
Originally Posted by imnuts (Post 214068)
It's working fine on Vista x64 for me. I have to start BuildOS as Administrator to get everything to work right, but I haven't had a problem other than that.
I get an error that says "Invalid Parameter". Or the Parameter is incorrect.

cruiser78 03-12-2008 11:52 AM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by gguruusa (Post 213754)
I've identified the problem...working on it.

Edit: I've made a temporary fix...please tell me if you still have the issue.

well I'm home from work now and I'm still having that login problem (buildos outdated)... both vista and xp are having the same problem so it's a not a vista issue... I'm on my xp machine now and the chat is working so I'll try and find you there

charleskincade 03-12-2008 12:45 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
GGuru, I tried to load the rom but I keep getting the message: Error 102: CE CheckSum Error. Can you please pm me and tell me how to correct this so I can load the rom to my 6700. Thanks in advance

ricky421 03-12-2008 12:48 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Is noone else having wifi problems? Ive searched all the threads and tried the turning it on waiting 10 seconds and then turning it off and back on and nothing.

as much as i liked the new features of this update (threaded sms!!) i had to reflash my phone back to wm6. i need the wifi and that was the only thing that worked.

i cant be the only one, can i? if anyone has any ideas on how to get it up and running that would be awesome.

please and thank you.

imnuts 03-12-2008 01:09 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by ricky421 (Post 214215)
Is noone else having wifi problems? Ive searched all the threads and tried the turning it on waiting 10 seconds and then turning it off and back on and nothing.

as much as i liked the new features of this update (threaded sms!!) i had to reflash my phone back to wm6. i need the wifi and that was the only thing that worked.

i cant be the only one, can i? if anyone has any ideas on how to get it up and running that would be awesome.

please and thank you.
Just connected to my home WLAN just fine and am browsing the web and setting up my favorites again.

ricky421 03-12-2008 01:20 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
did you have to do anything imnuts or did it just work from the start?

ps- just because i am having problems doesnt mean i am not very thankful for this release!!! :o)

imnuts 03-12-2008 01:23 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
I just turned on WiFi and it immediately noticed all the networks here, i picked mine from the list, put in my WEP key and it connected. I actually like it a lot better than WM6 as it picked up the networks a lot faster and took significantly less time to connect.

midniteslice 03-12-2008 01:33 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
is there still an issue with wpa??

canuckgeek 03-12-2008 01:52 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
I'm having login issues too. I get the following error:

Login Failed
[DBNETLIB][ConnectionOpen (Connect()_.]SQL Server does not exist or access denied.

kevdawg 03-12-2008 02:00 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by canuckgeek (Post 214367)
I'm having login issues too. I get the following error:

Login Failed
[DBNETLIB][ConnectionOpen (Connect()_.]SQL Server does not exist or access denied.
If I'm not mistaken this looks like a firewall issue. I get this error at work but not on my machine at home.

rajivkamath 03-12-2008 02:19 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Guru

How do i get my username password for the ppcgeeks ftp site?

Excheese 03-12-2008 02:22 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
When I click on the Kitchen Rom Kit link the save button in the BuildOS.msi popup window is not active (It's grayed out), only the cancel button is available.

EX

Figured it out...just had to be a little more patient for the "save" button to appear.

gguruusa 03-12-2008 02:34 PM
Re: Updater.exe and x64
 
Quote:
Originally Posted by kevdawg (Post 214070)
I get an error that says "Invalid Parameter". Or the Parameter is incorrect.
This is a manifest issue. I've bundled the manifest externally as a band-aid - as long as it's in the same folder as the .exe you should be ok. Setting Run as Administrator should also resolve the issue (and keep UAC from warning you all the time too).

cruiser78 03-12-2008 02:35 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by Van G (Post 213404)
I was able to update but I'm not able to login when running BuildOS using my PPCGeeks user and self created pass.

Initially I used my user/pass from here and that created the brought up the error 'BuildOS v.09.05.2 (03/03/2008) has expired.'

To be clear, I did the full update for all available updates and they did install.

Suggestions?
Problem solved... me and GGuru got it resolved this morning. I would imagine he'll have the updated version up soon.

Thanks again GGuru for all the time and effort you and your teammates have put into this!!! :D

Trident 03-12-2008 02:36 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by gguruusa (Post 214024)
What do you mean by "doesn't seem to get recognized properly?"

The overwriting is a warning...buildos doesn't know what they are, and in some circumstances overwriting is both unintended and deleterious. A future release will avoid/reduce the multiple popups issue.
When I say that, I mean that I see the following error when I open my project file. When I watch the progress of the build, it looks like the Alarm program errors then works correctly.
Error in BuildOS window: Internal Error- Option.xml GUID not found (BigJAlarmClock-26316bb1-c258-11db-8314-0800200c9a66)

kevdawg 03-12-2008 02:40 PM
Re: Updater.exe and x64
 
Quote:
Originally Posted by gguruusa (Post 214486)
This is a manifest issue. I've bundled the manifest externally as a band-aid - as long as it's in the same folder as the .exe you should be ok. Setting Run as Administrator should also resolve the issue (and keep UAC from warning you all the time too).
I should have mentioned I am running XP x64. The manifest file is in the same folder and i've tried running the executable as administrator and I still get the same error. Any other suggestions/ideas?

gguruusa 03-12-2008 02:52 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by Trident (Post 214490)
When I say that, I mean that I see the following error when I open my project file. When I watch the progress of the build, it looks like the Alarm program errors then works correctly.
Error in BuildOS window: Internal Error- Option.xml GUID not found (BigJAlarmClock-26316bb1-c258-11db-8314-0800200c9a66)
The option.xml in your OEM is not built correctly.

Perasite 03-12-2008 03:10 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by rajivkamath (Post 214444)
Guru

How do i get my username password for the ppcgeeks ftp site?
There is no longer a username and password. It is anonymous now, so you can access it by going to ftp://up.ppcgeeks.com

Trident 03-12-2008 03:10 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Alright, what the heck are you guys including (or more importantly, NOT including) that's allowing your ROMs to build. I'm stripping almost everything out and it still says it's too big.

Oh, and the errors when press play start with: "kitchens\PPCGeeks_OEMrar::Skin-Phone-no2chem_dualtouch-battery.bmp- Overwrite existing file?" and continue with about 20 more images.

frenchie 03-12-2008 03:18 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
I am so happy! This has made my apache an excellent device!

colonel 03-12-2008 03:20 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
That means that some of the dialer images were left in the kitchen by mistake. The dual touch dialer is then trying to overwrite them. While annoying, this is important to alert users to possible duplicate file issues. I will try to address the dialer image duplicates.

iceberg8685 03-12-2008 03:24 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Oh my goodness!!! Thank you! Thank you! Thank you! I love this!

canuckgeek 03-12-2008 03:37 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Quote:
Originally Posted by kevdawg (Post 214385)
If I'm not mistaken this looks like a firewall issue. I get this error at work but not on my machine at home.
Is there a work around for this?

Trident 03-12-2008 03:49 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Why can't I remove WindowsLive Mobile?

Where is that list of sizes of the individual OEMs?
I'm down to 240KB over... This thing already looks stripped!

shaggylive 03-12-2008 04:13 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
Ok, wish me luck, updating buildos now, yes i'm a virgin (to building)

Gervy 03-12-2008 04:19 PM
Re: Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308
 
I HATE YOU!!!! Just as I finally reflashed my phone for the n'th time, and finally settled on my apps, and decided never to touch my phone again (except as a 'user'), now this comes out. ARRRRGGGG....... :)


All times are GMT -4. The time now is 11:39 PM.
Page 4 of 43 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0