Flashing Palm treo pro

flyer · #1 (**permalink**) 02-26-2011, 07:21 PM

I have been trying to flash the rom in a palm pro, keep getting error 262. has anyone else run into this?
I have just tryed a program called "SkyWriter_1.12I.E.S1_PO134__Treo_PRO_" and it worked fine. but it flashes the stock rom. I want to install a custom rom. has anyone run into this? can anyone help me out?
if there was a way to change the .NBH file in that program ? just a thought.

raiderfan247365 · #2 (**permalink**) 02-28-2011, 01:31 PM

You need to unlock your phone before flashing

check this link out
http://forum.ppcgeeks.com/cdma-treo-...a-hardspl.html

flyer · #3 (**permalink**) 02-28-2011, 08:43 PM

Yes the phone is unlocked. I have tryed theInstructions from that link also, I have also tryed it from a sd card and from 2 differnt pc's, I get the tricolour screen and it looks like it will work then error 262 ? I am lost with it, I can flash the stock rom on ok. but not the custom roms? do I need a special cable?

raiderfan247365 · #4 (**permalink**) 03-01-2011, 12:13 AM

Quote:

Originally Posted by flyer

Yes the phone is unlocked. I have tryed theInstructions from that link also, I have also tryed it from a sd card and from 2 differnt pc's, I get the tricolour screen and it looks like it will work then error 262 ? I am lost with it, I can flash the stock rom on ok. but not the custom roms? do I need a special cable?

Are you sure you have your phone unlocked? because thats the only reason you should get that error... when in tri-color mode does your phone read "Cmonex" somewhere on the screen

flyer · #5 (**permalink**) 03-01-2011, 07:45 AM

are talking about the SPC sec code? that is set to 000000

when it goes to tricolor this is on the screen.

pant200 mfg
spl-0.32.sspl
cpld-2

and in the white at the bottom it will say usb

i will get a blue screen somtimes and it will say loading....
but it wont do anything from there.

raiderfan247365 · #6 (**permalink**) 03-01-2011, 12:31 PM

Quote:

Originally Posted by flyer

are talking about the SPC sec code? that is set to 000000

when it goes to tricolor this is on the screen.

pant200 mfg
spl-0.32.sspl
cpld-2

and in the white at the bottom it will say usb

i will get a blue screen somtimes and it will say loading....
but it wont do anything from there.

ya, your phone is not unlocked....

flyer · #7 (**permalink**) 03-01-2011, 07:23 PM

I got it. waited till I got the tricolor and switched the usb cable to a differnt port. and it worked...

vita_lp · #8 (**permalink**) 05-03-2011, 11:02 AM

Hi, i have the same problem that flyer had. I can't unlock my Palm Treo Pro.
In my tricolor screen said this:
PANT100
SPL-0.61.0000
CPLD-2
What thats mean?
Please I need help!

raiderfan247365 · #9 (**permalink**) 05-03-2011, 02:33 PM

Quote:

Originally Posted by vita_lp

Hi, i have the same problem that flyer had. I can't unlock my Palm Treo Pro.
In my tricolor screen said this:
PANT100
SPL-0.61.0000
CPLD-2
What thats mean?
Please I need help!

PANT100?
Do you have a GSM TREO PRO? If so you must use the GSM unlocker