|
||||
Re: [ Kitchen ][ 2-16 ][ v1.6 B2 ][28230 / 23534 / 21892 / 21056] Calkulin's WVGA Kit
tried it both ways, with and without the position fix
edit: and i was working for a day this time, them BAM
__________________
|
|
||||
Re: [ Kitchen ][ 2-16 ][ v1.6 B2 ][28230 / 23534 / 21892 / 21056] Calkulin's WVGA Kit
Quote:
What Manila Mods do you use?? |
|
||||
Re: [ Kitchen ][ 2-16 ][ v1.6 B2 ][28230 / 23534 / 21892 / 21056] Calkulin's WVGA Kit
Did you use any Manila Options when you flashed??
|
|
||||
Re: [ Kitchen ][ 2-16 ][ v1.6 B2 ][28230 / 23534 / 21892 / 21056] Calkulin's WVGA Kit
Originally Posted by boodaka
"Anyone know what causes this, its happening on both 23xxx & 28xxx, the screen jumps up for everything" It is g-alarm. You have two choices. 1. recook without g-alarm and install a cab. i use ver 2.3 and it is fine. 2. hard reset and never let g-alarm go off. HTH Last edited by welrope; 02-23-2010 at 12:31 PM. |
This post has been thanked 2 times. |
|
||||
Re: [ Kitchen ][ 2-16 ][ v1.6 B2 ][28230 / 23534 / 21892 / 21056] Calkulin's WVGA Kit
Quote:
edit: aaaaaaaacually i never went into galarm at all, i went into windows alarm to set my alarm and i remember it freezing and i had to pull the battery, so it wasnt galarm, it was windows alarm |
|
||||
Re: [ Kitchen ][ 2-16 ][ v1.6 B2 ][28230 / 23534 / 21892 / 21056] Calkulin's WVGA Kit
Quote:
You can build a rom without it and i bet you don't have this problem anymore. Simple as that. I depend on my phone as an alarm and i had this issue whether or not i used g alarm or windows....as long as g alarm was installed. Took me a while to trace down but after i removed it i have never had that issue again. Give it a try and don't forget about the thanks if it fixes your issue. If you read back through the posts you will find that others have had issues with this build of galarm. Removing it fixed it for me and them and im sure it will fix it for you. Thanks! Last edited by welrope; 02-23-2010 at 12:47 PM. |
|
||||
Re: [ Kitchen ][ 2-16 ][ v1.6 B2 ][28230 / 23534 / 21892 / 21056] Calkulin's WVGA Kit
Quote:
edit: i just disabled windows alarm and all is fine, gotta flash without the g man |
This post has been thanked 1 times. |
|
|
|