[ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitchen

[1900]

(FIXED) Data issues after 1.51 (phone hangs ups - cant get data password to stick)

I'm in verizon, unlocked and using oli's patched radio

I build a 1.51 23529 (loaded w/verizon carrier) last night as an upgrade to 1.40. The phone was perfect before the flash (which is why i was flashing!) after the flash, I had no data, and a phone that would disconnect as soon as i answered a call.

I reflashed radios, stock rom, nothing was helping.

I finally switched back to anoither phone using the verizon website. The old phone TP1 'worked' (data and all). I waited 15 mins and switched again to the TP2. This 'fixed' the phone portion - i could have a conversation instead of the call dropping as soon as i answered the phone. (This 'fixed' the phone portion - I found the idea in another post about how to get the verizon network to kick itself)

Data on the TP2 continued to have the PPP error and asked for the password.

i did *228 (option 1), *22899 a number of time over the time troubleshooting it - I also kept playing with 1.51 customizations

Finally i tried to check the PST (##778#) (i usually do this anyway to remove the dun.vzw3g data entry)

The data values for the phone number were STRANGE 0000008262@vzw3g.com This was NOT my phone number.

After changing the two values to have '0123456789@vzw3g.com' in both fields, a save and the required reset, i again was challenged for the password, This time 'vzw' worked and I finally have data.

I wonder where the 8262 number came from (i did see this once last night in the phones data password UI) - anyone know?

[smiznith]

Originally Posted by rileyd5

thanks but that's not it. no slider icons selected. this is driving me nuts. lol.

hmmm let me look at my kitchen.. i had the same problem..

[Riley]

Originally Posted by TMartin

What other Manila Options did you select??

manilla 2.1.192.3017.1
manilla clocks - 2.1.19xx flip trans white
manilla engine 2.1.3017.1
manilla options 2.1.19xx bg4allpages
m options2.1.19xx calendar back-trans
m options2.1....... slider transparent
m opitons2.1....... weather back trans
m options2.1.x curtain trans bottom
m options2.1.x c trans top
m options 2.1.x highlights blue
m options 2.1.x program l glass
m opitons 2.1.x remove dotted lines

thanks!

[geotravelcat]

Ok, the new kitchen 1.51 failed for me with an NBH error at the end. Any ideas????

[TMartin]

Originally Posted by rileyd5

manilla 2.1.192.3017.1
manilla clocks - 2.1.19xx flip trans white
manilla engine 2.1.3017.1
manilla options 2.1.19xx bg4allpages
m options2.1.19xx calendar back-trans
m options2.1....... slider transparent
m opitons2.1....... weather back trans
m options2.1.x curtain trans bottom
m options2.1.x c trans top
m options 2.1.x highlights blue
m options 2.1.x program l glass
m opitons 2.1.x remove dotted lines

thanks!

I used the red highlighted things with no issues. A lot of these packages were made for the older 2.1 packages so sometimes things won't line up perfect on a newer Manila version.

[shad0w77]

Originally Posted by TMartin

I used the red highlighted things with no issues. A lot of these packages were made for the older 2.1 packages so sometimes things won't line up perfect on a newer Manila version.

i think calk spoke about this before his 1.5t kitchen was released. serarch this thread for his posts. he said the version of sense 2.1 has larger slider iocns and icons in the middle of the screen when sliding. its not the options u r choosing, it just the version of sense 2.1. no fixes, because there is "nothing wrong".

i was askin the same when calk responded.

[vin255764]

Originally Posted by TMartin

I can't remember what file it is but I believe you can use the file from 1922. i'll let you know when I figure out the manila file.

Thanks,I appreciated.If you guys interested,Im almost finished Topaz camera.Camcorder is ok,but the camera needs a little alignment.Hopefully it can be fixed
http://forum.ppcgeeks.com/showpost.p...&postcount=819

[Riley]

Originally Posted by shad0w77

i think calk spoke about this before his 1.5t kitchen was released. serarch this thread for his posts. he said the version of sense 2.1 has larger slider iocns and icons in the middle of the screen when sliding. its not the options u r choosing, it just the version of sense 2.1. no fixes, because there is "nothing wrong".

i was askin the same when calk responded.

thanks for the tip. yep, I flashed like 4 times removing option after option and you are right, it didnt work. oh well.

[william_fold]

Heres the Amazon MP3 Store from the latest Leo leaked rom...

[Blades]

Originally Posted by Chuck_IV

What SYS and Manila version are you using? Mine works ok but I am running a SYS version not provided by Calkulin. I am running 23529 with Manila 2.52011 and the "Other" option works fine.

I'm running 21891 provided by cal. I could try cooking with 1.51.. or possibly just a temporary flash to 23529.