░░░░ MightyROM.com ░░░░ Windows Phone® ░░░░

[ziggy471]

Originally Posted by yvettejudd

We get slower as we get older ... Not talking about me, of course.... lolol

P.S. Anybody miss me this weekend??

Thanks.

I did until that comment.


Z

[kshimizu47]

After a reboot, the Manilla/Sense UI does not startup. I need to go to start->today and uncheck the sense, apply it and reapply again. Is there a way to fix that?

[Tink]

Originally Posted by ziggy471

Thanks.

I did until that comment.


Z

Oh Z, I'm hurt....

Too bad I have to go get ready for work and leave you guys alone.....

Edit: remove question, Z, google is awesome - sorry

P.S. Z, I have a question for real since I have your attention - would you happen to know the parameters for a gif when making one for a boot animation?

[Jonasvs]

I've got a strange issue. After connecting with active sync my proxy conf changes. With this rom I can not reach the proxy config to change it back. Any ideas? I'm using vodafone as provider. Using this rom the proxy config does not show in the connection tabs.

[rj_22]

why is it that I can't shut my phone down/reboot it? I hold the button like I normally do, but all it does is go to sleep. What gives?

[MordyT]

Originally Posted by ziggy471

Just got the pop-up saying close some stuff. I'll see if I can re-create yours with some bad programming.


Z

Originally Posted by ziggy471

That's how it's supposed to happen, but with the things I've seen, I can see it doing exactly what you described Mordy, guess you found a 'undocumented feature' of WinMo. I'll see if I can re-create it myself.


Z

Appreciate it Z and hypne (sp, lazy, sorry). Don't worry to much about it, I was just curios ...

Originally Posted by CA3SAR

I reinstalled the original from page one which did nothing, then installed this one and worked with nothing else. Owell it works im happy.

I tell you what. Sinc everyone seems to have issues with it, I will replace it with the one linked that people like...

Originally Posted by flyers2114

Yes indeed it can....I have had it happen a couple of times on different roms....I have also seen the message running low on memory....but when it soft reset itself I was running heavy on apps each time it happened...

Ok, glad to know I don't have a hardware issue...

Originally Posted by xjack

[/COLOR]

Just wanted to note that the imnuts cab did not work for me.

The tjELITE cab sends and receives fine, thanks tjE! It is displaying as threaded on my TP2.

Thanks from a newb!

See above...

[boldaslove]

Anyone here using a video driver for MR? I used "At0m Ang 3D Enhanced Driver" on stock 6.1 sprint rom, wouldn't wanna bust my setup in case it's not meant for this before I go and try it.

[blokx]

Originally Posted by blokx

Ever since I upgraded to the newest MightyROM, my received text messages are time-stamped for the wrong time. The time-stamp is displayed as 1 hour earlier than they are actually received. My sent messages are time-stamped the correct time. This is causing my conversation threads to be all messed up and out of order. Any idea what's causing this??

Originally Posted by hypeo

I've seen this phenomenon before, most of the time, it ends up being a network problem.

I've reset the phone multiple times as well as turning the radio off and back on. No luck.

Originally Posted by CA3SAR

Could be a dst thing, I think there was an update or a main thread regarding this.

Hmm...I might believe this if more things were effected, but it's literally ONLY my received text/mms times. Everything else is spot on.


Anymore suggestions? Eventually someone will suggest a winner! hehe

[imnuts]

I just went through 20+ pages, so this could be quite long. Also, I think all of my issues are now solved. Some of them are from old registry changes I was making and I think I got rid of those problems. My text message issue turned out to be the activation error others were experiencing on VZW. It was working at home cause I have the network extender which bypasses the authentication that VZW uses. Apparently the new radio that came out changed the authentication key that is used and the system cache(s) the old key from the previous radio and this is what is causing peoples issues. Hopefully the rumored 2.5 update with a new radio doesn't cause the same problems.

Originally Posted by MordyT

1) no (at least I don't think so)

As far as I know, the cabs I put together for ArcSoft should work with gifs, but I've never tried it out personally.

Originally Posted by dapbmonkey4u

I am using the imnuts USC cab, but I did need to change the MMS server address as it was a .com and it should be .net. have you looked at the server address?

I've attached updated USCellular cabs that change it from .com to .net. It was setup the way it was because those were the settings I found for USC and no one ever mentioned them not working or needing changed.

Originally Posted by rhyme187

This RoM is AWESOME however after the 7th random hard reset today im going back to his 2.1 build temporarly btw does anyone have the previous WAR rom before this new one?

Originally Posted by crackofdawn

Does anyone know where I can find a pre Sense UI 2.5 version of MightyROM? I can't find any downloads on mightyrom.com except the current one. I upgraded from 1/10/2010 to 3/23/2010 and my phone became super unstable (TP2). I've had to hard reset it 4 times in 2 days and it reset itself once just sitting on a table (phone rebooted and was suddenly wiped out of nowhere). It's getting very tiresome rejoining it to my company's domain every single time it resets, I just want the stability back from the old version.

So hopefully someone knows where I can find the last pre 2.5 version!

Are either of you installing mods or regedits for manila/sense from the old rom(s)? I had tons of issues the past few days from using older mods that were working fine on previous ROMs, but for some reason, something broke this one. Went through everything that I was changing and took out the obsolete stuff and also set several things manually and will re-export reg entries to update stuff as I think something I was changing/adding for a manila registry entry was causing all of my issues which were similar to what each of you describe.

Originally Posted by aamon17

Anyone else having issues with the hard keyboard not typing the characters "\" & "/"? I tried the old Verizon Keyboard Fix cab. It didn't do anything. I saw one other person in the thread with the issue & the reply asked if he'd provisioned his phone. Yes, I have provisioned my phone.

Any thoughts?

Tried it out and both slashes work fine for me, not sure what the problem is that is causing your issue.

Originally Posted by gtx_aspec

Hey guys, anyone else have this problem? In Landscape mode the Menus have headers that are too wide...this happens with everything out of the box right after a hard reset...Happens in any app where the menu list requires up and down scrolling headers.

Checked and it could be the theme your using if you changed it as my menus go the whole way across the screen in landscape.

Originally Posted by Navi1218

Hey quick question...does anyone know how to play quicktime videos on to the touch pro 2...or yet alone increase the limit of KB from mms or video maili recieve???

The cabs that I created for ArcSoft have send/receive limits that are at the max that you would likely be able to send through the carriers, if not over the max limit. Not sure why you'd want anything larger than what it's set to, which is 5MB by default.

Originally Posted by CA3SAR

just reinstalled cab from page 1 and still receiving error when sending mms but i can receive.

Not sure what was wrong with the cab in the first post, but I haven't had any issues with my VZW arcsoft cab. I can't make promises for the other carriers as I'm not on their networks, but for the most part, others seem to like them as well.

Originally Posted by sinman02

Most of the time I don't, but that's not the point... Just looking for a solution to an annoying problem... Why have software included in the rom if it doesn't work properly? Never had this issue with Mike's previous roms... I'm thinking it's a registry thing...

Text size seems fine for me in PIE, not sure what the issue is. It could be the page you're viewing isn't detecting the browser properly as I had that before.

Originally Posted by MordyT

Yes I know, double posting....

OK, I have a question... no guesses please, only hard facts.

Can running out of RAM (say the ram usage hit 100% and then you opened another program) cause the phone to reboot all by itself?

My RAM was high, I started streaming slacker, then bang. Phone was off...

And no, I didn't break it with a cab etc. I know what I am doing...

I could see it happening, but as others posted, I usually get an "out of memory" popup.

Originally Posted by rj_22

why is it that I can't shut my phone down/reboot it? I hold the button like I normally do, but all it does is go to sleep. What gives?

Did you provision your phone?

Originally Posted by boldaslove

Anyone here using a video driver for MR? I used "At0m Ang 3D Enhanced Driver" on stock 6.1 sprint rom, wouldn't wanna bust my setup in case it's not meant for this before I go and try it.

There should be a D3D driver built in, so you don't have to install your own or any of them that are floating around.

Also, I have all of my ArcSoft (and other) cabs posted on my Google Pages site for people to download and they are kept up to date as well, so you can't download an old version. It also says when the files were last updated, so you should be able to tell if what you have is older/out of date or not. See here

[rj_22]

^yes I did. At the very beginning when I flashed it