[Kitchen] WVGA Touch Pro 2 Collaboration

[lionedas]

Originally Posted by hthomas

I take it the phone wont boot,but will go into bootloader? Does bootloader say RHOD400 32M SS-BC
SPL-100OliNex ?
Try flashing a "Stock Rom"

Actualy it boots to the last rom I flashed, everything works,
it just wont flash anymore new roms!

Yea I tried the stock rom, no go it gets stuck at 0%

Thanks

[TMartin]

Originally Posted by lionedas

Actualy it boots to the last rom I flashed, everything works,
it just wont flash anymore new roms!

Yea I tried the stock rom, no go it gets stuck at 0%

Thanks

Are you trying through ActiveSync and also from sd? I would also try stock Rom through both.

Edit: Oops just read your original post.

Sent from my HTC Evo 4G!

[Jbradthomas]

Originally Posted by Sharkie405

until a soft reset? Or manually running this process? Is that possible?So you have kept it from starting up on it's own at start up? How do you do that? Just by moving the link?

I have "Bluetooth Setting 2.11.1.2" placing itself in my Start Menu>Settings folder. I've not messed with it ever, because that seems as good a place as any. Is this what you're talking about?


Also,

Fresh after soft reset these are my top running processes:

device.exe - 8.44m
filesys.exe - 7.54m
cprog.exe - 7.49m
services.exe - 3.96m

My device.exe will slowly creep up to 12.5.... That's the highest I've seen it.

Are those normal? They look way high. I see people talk about their device.exe sitting at like 3.5 or something. Anyone know where I should check for this problem? I read something about SIP increasing device.exe. Is that true? I only have EZInput cooked in. Everyone uses that so I don't see how that could be a big problem.

You can run DevHealth to see what each process is using. I have it on my storage card. Takes awhile to run.

DevHealth.exe.zip

Here is a copy of my mem.txt. Not sure if its good or bad .
mem_1.zip

[Formula84]

Originally Posted by lionedas

Actualy it boots to the last rom I flashed, everything works,
it just wont flash anymore new roms!

Yea I tried the stock rom, no go it gets stuck at 0%

Thanks

Had the exact problem before and freaked... turned out to be my sd card. Remove it Put phone into manual bootloader (Vol Down + Power on) and flash a stock rom. It will work.

[lionedas]

Originally Posted by Formula84

Had the exact problem before and freaked... turned out to be my sd card. Remove it Put phone into manual bootloader (Vol Down + Power on) and flash a stock rom. It will work.

Thanks Formula

But I tried that 2, nothing seems to work, I even tried 3 different micro sd's with RHODIMG.nbh in them, They all do the same thing, they stop at the loading screen.

Tried to flash without a microsd card in the unit no matter what, will not go past 0

its like it relocked itself, but wont let the unlocker work, or even a stock sprint rom.

[vin255764]

Originally Posted by lionedas

Thanks Formula

But I tried that 2, nothing seems to work, I even tried 3 different micro sd's with RHODIMG.nbh in them, They all do the same thing, they stop at the loading screen.

Tried to flash without a microsd card in the unit no matter what, will not go past 0

its like it relocked itself, but wont let the unlocker work, or even a stock sprint rom.

Thats how they die.Keep trying to flash hspl unlocker via activesync with removed sd card.(even if its already unlocked)

[TMartin]

Originally Posted by lionedas

Thanks Formula

But I tried that 2, nothing seems to work, I even tried 3 different micro sd's with RHODIMG.nbh in them, They all do the same thing, they stop at the loading screen.

Tried to flash without a microsd card in the unit no matter what, will not go past 0

its like it relocked itself, but wont let the unlocker work, or even a stock sprint rom.

Have you tried task29??

[lionedas]

Originally Posted by TMartin

Have you tried task29??

I thought of that 2

but if it clears out the whole phone and then it doesn't let me reflash, I will realy have a brick, now at least the last rom I loaded works.

or ?

[TMartin]

Originally Posted by lionedas

I thought of that 2

but if it clears out the whole phone and then it doesn't let me reflash, I will realy have a brick, now at least the last rom I loaded works.

or ?

That is very true. The question is....Do you feel lucky?? lol

[Sharkie405]

I don't have any more answers than what anyone else said, but it's very odd because the same thing happened to me last night. My phone wouldn't flash past 11% on any ROM. I just kept trying and took out SD card a couple of times and hard reset a couple of times and tried to flash several ROMs. Finally, for no reason that I could make out, I was able to flash the Sprint stock ROM and since then, everything's been cool...

Scary shite when that happens!

Originally Posted by corey1138

Wow how much does your gwes.exe take up?

4.39m, after a night of moderate usage. Your "Wow" doesn't really tell me much... Is that a damn, those numbers are high! or a damn, those numbers are low! ?