[TOOL] Task 29 (format internal Memory) without drivers, witout mtty

[agent_47]

i thought of re doing doloop's modd for CDMA TP2
and here it is fully tested to be working
confirmation thnx to ziggy471: http://forum.xda-developers.com/show...6&postcount=97
now we can mtty our TP2 without having the need of MTTY and its drivers

INSTRUCTIONS:
- download and unzip
- put you favorite RADIO in the mix
- run then task29.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM

DOWNLOAD:
task29


CREDIT:
all credit goes to doloop for coming up with the idea

Originally Posted by doloop

Hi,

I hex edited RomUpdateUtility.exe so it runs task 29 right after flashing ruu_signed.nbh

As every one understand this command format the rom,

Just unzip and run task29.exe . You may replace ruu_signed.nbh with the radio of your choice.

After the phone reset itself, your old rom will be gone, so it won't boot: binfs has been formated, your phone memory is clean.
You'll need to power up in bootloader mode (press vol down right after power key), then use the leocustomruu.exe provided with your favorite rom package, or flash it from memory card using standard procedure.

http://forum.xda-developers.com/show...08&postcount=1

[ziggy471]

Originally Posted by agent_47

i thought of re doing doloop's modd for CDMA TP2
and here it is fully tested to be working
confirmation thnx to ziggy471: http://forum.xda-developers.com/show...6&postcount=97
now we can mtty our TP2 without having the need of MTTY and its drivers

INSTRUCTIONS:
- download and unzip
- put you favorite RADIO in the mix
- run then task29.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM

DOWNLOAD:
task29


CREDIT:
all credit goes to doloop for coming up with the idea


http://forum.xda-developers.com/show...08&postcount=1

Welcome over here to PPCG, glad to see that you decided to post it here too.


Z

[ffkip911]

is this confirmed cdma? this is the filename...sounds GSM to me
Radio 2.08.50.05 + task29.zip

[ziggy471]

Originally Posted by ffkip911

is this confirmed cdma? this is the filename...sounds GSM to me
Radio 2.08.50.05 + task29.zip

If you read it, I confirmed it last night on my TP2 over on XDA, so yes, it works.


Z

[Joosey]

Hey you all Im new to this flashing and rom stuff. When I run the task29 file does it come with a radio? Also what is a radio and how do I get it if the task29 doesn't come with one?

[willyjay]

Originally Posted by Joosey

Hey you all Im new to this flashing and rom stuff. When I run the task29 file does it come with a radio? Also what is a radio and how do I get it if the task29 doesn't come with one?

Check out the task29 explanation page Mordy put together...
http://forum.ppcgeeks.com/showthread.php?t=116920


Short answer, no it does not have a radio and if you use the .exe from post #9 it will not change or affect the radio you currently have.

[Nygel]

this has probadly been ask but what RADIO'S technically you can use to flash with this?

[ziggy471]

Originally Posted by Nygel

this has probadly been ask but what RADIO'S technically you can use to flash with this?

Any of the radios, or a splash screen.

If you'd prefer, here's one with a splash screen all build in, just run it and go through the RUU like normal.

Click Here to Download

Z

[proxhack]

Great job!!!

Thank you!

[mwalt2]

Any reason why this would be TP2 specific (assuming you used a radio appropriate for your device)? Seems like a nice idea.