RSTG Roms - Spb MobileShell 3.5.3 - 21893/23541.v05 .-. 3/6/10

[rstoyguy]

One thing that may cause that is a bad flash, or what happened to me today... If you let the rom load and don't do the steadysoft provisioning, mobile shell will load up and you'll miss it. When you soft reset, that's what it does... I'll have to look into the endbutton, I don't recall seeing that...

[pesok]

Originally Posted by rstoyguy

6. Good point. Ya got v1.35 ?

First of all thank you for V4, flashing now, didnt realise WM 6.5.3 worked with SPB MS, i remember hearing that only WM6.5 does and 6.5.3 breaks SPB MS, but since you uploaded both - it must now work? Very nice.
Downloading now(WM 6.5.3 version) and will test again as thoruoghly as i can and do another feedback like last one. Nice to see that you're actually reading them instead of just bushing them of like some cooks here(no names).

In responce to your question yes i haver WMWiFirouter v1.35 that i have used since it came out and in very next version (1.50 is the next one skipping completely over 1.4x for some reason) doesnt not have BT for TP2 anymore. Read this for their explanation(or lack off - scroll to TP2)

Here i uploaded V1.35 for you, but in my opinion no need to cook it into the ROM - it installs quite easily when someone needs it, just my 2c

[pesok]

Sorry for long read but because of two of the new issues i had to go back to your V3 after 10 mins of use of V4. V4 is not very usable because of error#2(unless you never reboot) and not usable for me(at least) because of #2 as well. PLEASE FIX IT ASA(humanly)P!!! Sorry for caps just want you to notice this(since you missed my last feedback)

Just flashed V4(the WM6.5.3 one) and thank you for fixing all the points from my previous review/feedback! Even Opera 10b3 is there!
Couple of things i noticed within 10 mins of using v04:

1) Swype(thank you for it btw!) gives error message-when you use it for the first time or after every reboot: "The swype package you installed is configured for another device and will operate with limited functionality". When you reboot even clicking OK on that message does not let you go any further, have to press all buttons for about a min and press inside reset button few times - before that message dissapeares and it lets you login to system. In this thread users people are talking about the need to modify model.txt file in order for Swype v3.9 to work properly(but at the same time it might break your net connection setting and email accounts - that would need to be fixed after install).

2) All the skins for Mobile Shell are gone? I could not restore my saved backup configuration from v3(the way icons are placed and so on) then i tried to change the skin for some icon thats on your default homescreen and where in V3 there were bunch of very nice skins for mobile shell - there are none now, not even 1. Can you bring back all the skins from V3 that you had?

Since i cannot restore my config file from V3(it used a lot of custom skins from Mobile Shell and had about 12 screens full of stuff layed out the way i liked it) i am going back to your V3 for now and cannot test V4 any further. If its easy to live with error #1(just dont reboot) its much harder to live with error #2 for me(took me over 2 hours to find good placement for all icons. I am using my TP2 on daily basis for work so i need it tommorow morning. really hope you can fix both errors asap so i can get back to testing V5 of you amazing ROM!!!

[pesok]

Update: been trying for a while now and still cannot get into system. After reboot i get the error #2(above post) message and after clicking OK and waiting for a bout a min i get Starting windows screen and it just hangs there. Going to do hard reset and try your V4(WM6.5) before going back to V3

[pesok]

just flashed V4 WM6.5 and its the same story it seems - the swype keyboard gives you an error after reboot(seems you have to use it once to get that message every time you reboot) and whats even worse the skype keyboard doesnt seem to work at all - it lets you "draw" but it does not actually type anything in(tested in SMS).
Also same for error #2 - all skins in mobile shell are gone as well, so verdict is both errors are identical in V4 WM6.5.3 and V4 WM6.5. Going back to V3 and hoping to see V5(especially WM6.5.3 exited about) soon!
Thanks for all your hard work dude!!!

[pesok]

just occured to me it seems that "limited" mode that swype is showing in error is that you can use it as a regular(type one letter at once) keyboard but not as a swype(draw lines to make words) keyboard. When you try to draw words(like in swype V2) the whole keyboard just blinks and nothing is typed

PS sorry for 5 posts - hope you can have patience to read all 5

[rstoyguy]

Originally Posted by pesok

PS sorry for 5 posts - hope you can have patience to read all 5

Patience I have a ton of, I'm a retail sales manager... However I recently had a stroke that caused me to lose my ability to read and write, I still have issues with long paragraph's. I will sit down in the morning and absorb the feedback you've given me! So not blowing you off pesok, just mind limitations...

Thanks to ppcgeeks for this rom stuff enabling my speedy recovery!

[Riley]

Originally Posted by rstoyguy

Patience I have a ton of, I'm a retail sales manager... However I recently had a stroke that caused me to lose my ability to read and write, I still have issues with long paragraph's. I will sit down in the morning and absorb the feedback you've given me! So not blowing you off pesok, just mind limitations...

Thanks to ppcgeeks for this rom stuff enabling my speedy recovery!

That's why youdabest! Thanks Don.

[pesok]

Originally Posted by rstoyguy

Patience I have a ton of, I'm a retail sales manager... However I recently had a stroke that caused me to lose my ability to read and write, I still have issues with long paragraph's. I will sit down in the morning and absorb the feedback you've given me! So not blowing you off pesok, just mind limitations...

Thanks to ppcgeeks for this rom stuff enabling my speedy recovery!

Sorry dude didnt realise you still recovering, dont worry about reading all that here is short summary:

1) Swype keyboard gives error whenever you try to use it or after each reboot(have to use it at least once prior) -The swype package you installed is configured for another device and will operate with limited functionality". And it does not work-only key per press works not drawing. Solution might be in this thread(modifiying model.txt file perhaps)

2) All Mobile Shell icons are gone in V4(were there in V3), prevents from restoring backup made in V3(was using a lot of those great icons). Can you bring them back?

3) Here is WmWiFirouter V1.35 you asked for, no need to cook it into rom though IMHO(some might prefer later version)

Untill you have time to do V5 going back to your V3-feel better dude we all here for you!

[rstoyguy]

Originally Posted by pesok

1) Swype keyboard gives error whenever you try to use it or after each reboot(have to use it at least once prior) -The swype package you installed is configured for another device and will operate with limited functionality". And it does not work-only key per press works not drawing. Solution might be in this thread(modifiying model.txt file perhaps)

2) All Mobile Shell icons are gone in V4(were there in V3), prevents from restoring backup made in V3(was using a lot of those great icons). Can you bring them back?

3) Here is WmWiFirouter V1.35 you asked for, no need to cook it into rom though IMHO(some might prefer later version)

Untill you have time to do V5 going back to your V3-feel better dude we all here for you!

1. On 23541? Works fine in 21893, I'll check for dupes later...
2. A little problem with packing the kitchen so full. Let me drop a few programs and see. It was also causing my messaging "mark all as read" to not display correctly too.
3. I don't use neither, I'll look into it as well. First thing I wanna do tonight is make a new Opera for the rom, the one in the kitchen is providing "out of memory" errors...