dcd's hermann ROM & kitchen 2.16

[LilRico]

Originally Posted by dcd

i am not familiar with this version, actually you will find that i have not ported anything to vga (except youtube), i am using everything stock where possible, i think album in my repo is 2.0.


sensorsdk4 was in my roms before 2.00, i took it back to stock 3.3 per as above, but lately i have gone back to sdk4 for its compatibility and not had the issues we saw previously


glad you got that fixed. my nuebattery oem is a little modified, it removes his cpl, driver only.

i got out after a mere 15 hours

DCD, in your youtube, go to the search area and open the keyboard or make it go into landscape. You'll see a small bug....

[dcd]

Originally Posted by LilRico

DCD, in your youtube, go to the search area and open the keyboard or make it go into landscape. You'll see a small bug....

yeah, apparently, thats just how youtube is, i think its right in youtube 2.5

[quadjacks]

anyone using sashimi, successfully import email settings?

[billblack]

Has the Alltel Carrier been updated for the newer radios?

[billblack]

Originally Posted by quadjacks

anyone using sashimi, successfully import email settings?

I am not on 2.06 yet but I always set up my Exchange & POP via Sashimi.

[quadjacks]

Originally Posted by billblack

I am not on 2.06 yet but I always set up my Exchange & POP via Sashimi.

i may have to roll back to test as i am not able to in 2.06. also found a site that allows you to create cab from XML, but i get errors there aswell.

[askwhy]

Originally Posted by quadjacks

anyone using sashimi, successfully import email settings?

I am on 2.06 (using kitchen as base) and have no trouble with Sashimi importing my email account from the same provisioning xml I have had and used on various other ROMs. What errors are you getting, and where?

(I know, I don't need to run Sashimi at all, and could cook everything in -- but I have some reasons)

[quadjacks]

Originally Posted by askwhy

I am on 2.06 (using kitchen as base) and have no trouble with Sashimi importing my email account from the same provisioning xml I have had and used on various other ROMs. What errors are you getting, and where?

(I know, I don't need to run Sashimi at all, and could cook everything in -- but I have some reasons)

i attempted to provision the xml file with makisu, but no settings are there afterwards.

i tried using advanced config and got errors:


theres more but too much to express here. this is the error i got only after attempting with Advanced Config.

below is my XML data. please keep in mind i created this XML while using this new DCD rom recently as your XML may be from past.


<wap-provisioningdoc>
<characteristic type="EMAIL2">
<characteristic type="{080f0608-000c-0f0e-0110-06000a080e03}">
<parm name="CONNECTIONID" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="SERVICENAME" value="Gmail" />
<parm name="SERVICETYPE" value="IMAP4" />
<parm name="INSERVER" value="imap.gmail.com" />
<parm name="OUTSERVER" value="smtp.gmail.com" />
<parm name="NAME" value="°.<tee>< Ppc" />
<parm name="AUTHNAME" value="davaul@gmail.com" />
<parm name="AUTHSECRET" value="XXXXXXXX" />
<parm name="DOMAIN" value="" />
<parm name="REPLYADDR" value="davaul@gmail.com" />
<parm name="FORMAT" value="2" />
<parm name="LINGER" value="5" />
<parm name="RETRIEVE" value="-1" />
<parm name="KEEPMAX" value="0" />
<parm name="DWNDAY" value="1" />
<characteristic type="TAGPROPS">
<parm name="8128000B" value="1"/>
<parm name="812C000B" value="1"/>
</characteristic>
<parm name="AUTHREQUIRED" value="1" />
<parm name="SMTPALTENABLED" value="1" />
<parm name="SMTPALTAUTHNAME" value="davaul" />
<parm name="SMTPALTPASSWORD" value="XXXXXXXX" />
</characteristic>
</characteristic>
</wap-provisioningdoc>

[askwhy]

Originally Posted by quadjacks

i attempted to provision the xml file with makisu, but no settings are there afterwards.

i tried using advanced config and got errors:

System.Xml.XmlException: Invalid character in the given encoding. line 9, position 31. at System.Xml.XmlTextReaderImpl.Throw(Exception e)...........

theres more but too much to express here. this is the error i got only after attempting with Advanced Config.

below is my XML data. please keep in mind i created this XML while using this new DCD rom recently as your XML may be from past.


<wap-provisioningdoc>
<characteristic type="EMAIL2">
<characteristic type="{080f0608-000c-0f0e-0110-06000a080e03}">
<parm name="CONNECTIONID" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="SERVICENAME" value="Gmail" />
<parm name="SERVICETYPE" value="IMAP4" />
<parm name="INSERVER" value="imap.gmail.com" />
<parm name="OUTSERVER" value="smtp.gmail.com" />
<parm name="NAME" value="°.<tee>< Ppc" />
<parm name="AUTHNAME" value="davaul@gmail.com" />
<parm name="AUTHSECRET" value="XXXXXXXX" />
<parm name="DOMAIN" value="" />
<parm name="REPLYADDR" value="davaul@gmail.com" />
<parm name="FORMAT" value="2" />
<parm name="LINGER" value="5" />
<parm name="RETRIEVE" value="-1" />
<parm name="KEEPMAX" value="0" />
<parm name="DWNDAY" value="1" />
<characteristic type="TAGPROPS">
<parm name="8128000B" value="1"/>
<parm name="812C000B" value="1"/>
</characteristic>
<parm name="AUTHREQUIRED" value="1" />
<parm name="SMTPALTENABLED" value="1" />
<parm name="SMTPALTAUTHNAME" value="davaul" />
<parm name="SMTPALTPASSWORD" value="XXXXXXXX" />
</characteristic>
</characteristic>
</wap-provisioningdoc>

Looks like you have special/strange characters in your 'NAME' field -- try cleaning that one up and see if it takes. Other than that and username/pass, your xml looks a lot like mine (also for gmail).

EDIT: Yup, in your screenshot the error even references line 9, which is where your 'NAME' field is. Try changing that.

[quadjacks]

Originally Posted by askwhy

Looks like you have special/strange characters in your 'NAME' field -- try cleaning that one up and see if it takes. Other than that and username/pass, your xml looks a lot like mine (also for gmail).

EDIT: Yup, in your screenshot the error even references line 9, which is where your 'NAME' field is. Try changing that.

OMG, that worked perfectly, thanks.... also found this site that creates cabs out of XML files here http://supware.net/

well i didnt find it, was given too by dude over at XDA during my quest for sanity in this situation.