dcd's hermann ROM & kitchen 2.16

[Kane3162]

I wont lie, I was totally about to ask that, normally i can get by using the contact list, today i needed it and this problem thats been here since 1.0* really pissed me off and screwed me up causing a terrible day for me.

[jasonfilmfan]

Using Tachi PhoneCanvas 4.10.34656.1 eliminated the blur for me.

[osva]

Originally Posted by jasonfilmfan

Using Tachi PhoneCanvas 4.10.34656.1 eliminated the blur for me.

Where can I download it?
Does ## codes work?
Nevermind, I installed one and got rid of that..
http://forum.ppcgeeks.com/showpost.p...24&postcount=1

[dcd]

Originally Posted by Tannerj

I will try what you suggested I appreciated it.

did you get it figured out?

Originally Posted by billblack

I am using radio 1.12.20F and GPS locks real slow (5 to 10 minutes?) The SUPL AGPS key is empty. If it is supposed to be, the Alltel carrier cab is good.

it is supposed to be empty. make sure you have the latest alltel carrier cab or you wont get agps. make sure you have the latest alltel PRI. if nothing else, flash the stock 2.01 alltel ROM. make sure your device is connected to activesync when you start flashing stock, do not flash from bootloader (it applies the PRI)

Originally Posted by stanelie2

So, I reinstalled a clean DCD 2.06, installed dcd's xt9_ime cab and my carrier cab (telus).

I still have no symbol pad on my phone.

did you install ezinput? or if you did then maybe it is there but the key is assigned to something else.

Originally Posted by ranmasaotome510

its like a file transfer protocol between bluetooth devices, i used it alot to transfer stuff from my PC to my TP

I think you are talking about BTFTP, i put a cab for that up

Originally Posted by dishe

I think we need an official post for .cabs to reinstall parts of the stock ROM people may want.

i will work on this but my little amount of time has been cut down to almost no time...

Originally Posted by dimitri

To everyone else, does anyone have the newest cab for voice command? Any help is appreciated.

MS whines anytime somebody posts this so I have not created or hosted one but they are out there

Originally Posted by BillThyCat

Any idea what the changes were? I see my carrier USCC even got some love.

everything was updated for agps and automatic areacode a little while ago and the rest is mostly reorganization

Originally Posted by pleasestirme

Go Wings!

damn straight, this year we dont have a 7 million dollar distraction who wants to sit back and watch as the team wins a cup for him, and a 3 million dollar winger whos really worth 1mil max but thinks hes worth 5mil. we got kids in GR who could put up hudler numbers blindfolded. cup number 12 june 2010.

Originally Posted by hyakku

Youtube just says, cannot play video

youtube eats lots of memory and if you have modules in slot 0 no go, im guessing you ported an OS and did not run tools\flatten65.bat

Originally Posted by Xx_xBLADEx_xX

I have Cricket as my carrier, but the problem is I can't get the Internet/MMS/Picture Mail to work. I have installed DCD Cricket Carrier cab, but its for Titan phone and not the Rapheal/Herman.

that had never been requested before, I will work on a new cricket cab when I get time, however both my ROM and carrier cab include nothing for MMS support. I have posted an uncustomized, current version of Arcsoft MMS in the software forum with the intent of someone else importing carrier settings for their carrier and distributing as an out of the box ____ carrier MMS solution. I think most of us on sprint verizon and alltel have something of this nature. If you provide me cricket mms settings I could do it myself, but short on time lately. By the way, for a first post, you sure know how to include detail and ask a clear question better than some veterans.

Originally Posted by mrnamster

Anybody else having incompatibility with the CM WiFi Internet Sharing OEM?

Mine says it's running but no other devices can connect to the network.

i think i need to stick a .reg in carrier cabs for that but i've never looked at it, again as time permits.

Originally Posted by Rourke Swift

Truth, I'm anxious for a new release too. Haven't had to flash anything in weeks and weeks, and that's just wrong...

my goal here was to create the most bug-free base possible, once I felt like i reached that goal i took the base a little more experimental, i will not make any official update until i feel it is bug free again, and with a new GUI, thats probably not going to be soon...

Originally Posted by 2canSAM

does anyone else have the standard WM pop up flash a couple of times on an incoming call?

there is a .reg fix posted for this in mightymike's thread, or somewhere on xda "Enable Phone Skin.cab" which is the same .reg fix.

Originally Posted by Kane3162

normally i can get by using the contact list, today i needed it and this problem thats been here since 1.0* really pissed me off and screwed me up causing a terrible day for me.

thats a funny joke, because surely you cant be serious here. its already been discussed on this thread, as well as here, and being that its a conflict between newer WM builds and HTC's dialer, your only option is to revert to an older WM build (the cprog fix has other side effects), and I have provided a kitchen for you to do just that. since you can click on contacts and thus the functionality is completely unneeded, i'm not holding my base back at ancient WM builds over it.

[2canSAM]

there is a .reg fix posted for this in mightymike's thread, or somewhere on xda "Enable Phone Skin.cab" which is the same .reg fix.


Hey man thanks for the info but I did a hard reset and reflashed last night since I had played around with a bunch of dialers and keyboards. It must have been one of the other dialers I installed cause the issue, with only the tachi dialer that is in the 2.06 ROM is not there any more. Again what an awesome ROM

[Roguefoxx]

Originally Posted by dcd

damn straight, this year we dont have a 7 million dollar distraction who wants to sit back and watch as the team wins a cup for him, and a 3 million dollar winger whos really worth 1mil max but thinks hes worth 5mil. we got kids in GR who could put up hudler numbers blindfolded. cup number 12 june 2010.

Exactly!

You in GR too DCD? Born and raised westsider here.

Anyway, love the rom. Thanks for the great work.

[dcd]

Originally Posted by Roguefoxx

You in GR too DCD?

nah, I am in Illinois, but as you know we don't have any good hockey here

[Nimdock]

Is anybody besides me installing dcd's cab for random access and not getting anything at all?

[stanelie2]

To DCD,

Ez input is installed, but the sym key is assigned to internet explorer. If I unassign it in the button menu in the control panel and I set it to "none", then, it does nothing. How can I re-assign the sym button to the symbol pad so it behaves as it should?

Thanks.

[dcd]

Originally Posted by stanelie2

To DCD,

Ez input is installed, but the sym key is assigned to internet explorer. If I unassign it in the button menu in the control panel and I set it to "none", then, it does nothing. How can I re-assign the sym button to the symbol pad so it behaves as it should?

Thanks.

until i fix the ezinput cab you can run /windows/kbdconfig.exe (i think) and remove the SYM mapping

Originally Posted by Nimdock

Is anybody besides me installing dcd's cab for random access and not getting anything at all?

i thought i fixed that, but maybe not by 2.06, i will check it