[AUG 4] *12 Radios Available* Updated Touch Pro CDMA Radio Archive Thread - Page 53

**razorloves** · #1 (**permalink**) 11-03-2009, 11:58 AM

Quote:

Originally Posted by gluka47

does it matter if the band # is on sleep mode and not on cdma pcs

sleep mode is displayed when your data connection is idle or off.
cdma pcs is displayed when your data connection is active.

tb5... · #2 (**permalink**) 11-04-2009, 06:04 PM

Which radio are Bell users using...

i see that there are none in post 1... so there is no way goin back to the one i have currently...

i am interested tho if there are any members that have changed their bell radio and have seen better reception/battery life...

:\ thanks

imgmorley · #3 (**permalink**) 11-04-2009, 06:49 PM

1.12.34F Link has expired or is invalid

**razorloves** · #4 (**permalink**) 11-04-2009, 10:22 PM

Quote:

Originally Posted by imgmorley

1.12.34F Link has expired or is invalid

just tried it. works fine.

wildpig · #5 (**permalink**) 11-07-2009, 07:41 AM

sorry if i missed this but i am having real problem getting activesync to work. any other way i can upgrade radio or rom without using activesync? thanks

**razorloves** · #6 (**permalink**) 11-07-2009, 07:51 AM

Quote:

Originally Posted by wildpig

sorry if i missed this but i am having real problem getting activesync to work. any other way i can upgrade radio or rom without using activesync? thanks

you can use winrar and extract the nbh file out of the radio you download. then flash it via microsd card per these instructions http://forum.ppcgeeks.com/showthread.php?t=43266
or, you can put the phone into bootloader mode and then open the radio exe you downloaded from first post.

ejoshkim · #7 (**permalink**) 11-07-2009, 04:56 PM

I've been out of the loop for a while.
Looking for a recommendation for Sprint- Touch Pro radio recommendation.
Thanks in advance!

wildpig · #8 (**permalink**) 11-08-2009, 06:42 AM

i extract and put the file RAPHIMG.nbh from exe file and put it in the root dir of my 16 gb microsd. i then press volume down, power then reset with stylus but it would show the multicolor loader screen for only less than a sec and then it goes into a blank screen with the word "loading..." and doesnt do anything else... Anyone knows whats the problem is? i am currently using a 16 GB sandisk microsd.

**razorloves** · #9 (**permalink**) 11-08-2009, 04:36 PM

Quote:

Originally Posted by wildpig

i extract and put the file RAPHIMG.nbh from exe file and put it in the root dir of my 16 gb microsd. i then press volume down, power then reset with stylus but it would show the multicolor loader screen for only less than a sec and then it goes into a blank screen with the word "loading..." and doesnt do anything else... Anyone knows whats the problem is? i am currently using a 16 GB sandisk microsd.

sounds like you haven't unlocked your device. true?

tbone2000 · #10 (**permalink**) 11-09-2009, 06:19 PM

Quote:

Originally Posted by wildpig

i extract and put the file RAPHIMG.nbh from exe file and put it in the root dir of my 16 gb microsd. i then press volume down, power then reset with stylus but it would show the multicolor loader screen for only less than a sec and then it goes into a blank screen with the word "loading..." and doesnt do anything else... Anyone knows whats the problem is? i am currently using a 16 GB sandisk microsd.

I had a similar problem. What I had to do is run the manual HardSPL and that did the trick. It will still jump to the "loading..." screen but then quickly jumped to "checking..." and then asked if I wanted to flash the ROM.