[ ROM ] [ KITCHEN ] JUICY 8 - Build 090922H (23052.5.3.0) [UC]

[scuccia]

Originally Posted by thelastpoet

no dice...flashed Hermann_C_SPRINT_WWE_1.03.651.4_RS1.03.15F_SPCS_1. 53_0909_PRL60613_Ship

from the stock carrier thread around here...my esn's are still wrong...and neither of my msl's work...and it wont allow me to update the profile...im stumped...

You could try ##786 and do a restore.

[thelastpoet]

you need the msl for that...neither of them (from sprint CS)work nor do the msl's spit out by getSPC work

[scuccia]

Originally Posted by thelastpoet

you need the msl for that...neither of them (from sprint CS)work nor do the msl's spit out by getSPC work

Did you try thins to get your MSL?

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r

• The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows. 826202

[Juicy47]

Originally Posted by pastert33

Can't wait! Hope it comes with TFLO3D 2!

It will come with TFLO3D 2

[pixelwix]

will it come with 6.5?

[kristopher135@yahoo. om]

i had an earlier post back on page 129 about the internet not working and even after going to the files and installing the push internet cab, my tp still will not use a data connection while having bluetooth turned on... any other suggestions?

[jpc0480]

Is there a way to get my rA icon back? I've noticed that when I go into rA there is no icon. If I'm in evdo the E shows and it shows for 1x, but not for rA...

Couple more questions?

MMS? I have Alltel is there anything else I will need to install to get MMS working?

Auto Rotate? Is there an app that is good for rotating the screen when you turn the phone? I seen something on here a while back, but read that it was buggy? Didn't know if something new was out there.

Light Sensor? I seen an app floating around here that when you pulled the phone back from your ear it turned the phone back on. Didn't know if anyone else knew where that was. I think it was here or it could have been at XDA...

Originally Posted by scuccia

Did you try thins to get your MSL?

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r

• The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows. 826202

Great info! A thanks to you for this.

There's also an easier way.

http://www.baf.cc/bafmsl

If I remember right, install it, turn off the phone radio (turn on airplane mode), SOFT RESET, then when the phone boots back up, use the MSL grabber. Just play around with combinations of airplane mode + soft resets till it will get the MSL. The instructions it provides didn't work for me, I had to do as I described just before.

[thelastpoet]

i found a thread about it...its def a dcd carrier issue...

suggested using http://forum.ppcgeeks.com/showthread.php?t=43560 (needs CF 3.5)

which grabbed my msl...i was able to ##RTN# it...

it self programmed...restarted...net works

installed dcd carrier cab...restarted... navigated to windows/PPST.exe

deleted it...restarted...net still works...

pri option is still there but now broken

## codes work


im going to reflash juicy 6 , install dcdc, and see if by deleting that file it disables the update pri but leaves the ## codes intact

ill post on the main page if that solution works...

thanx for all that helped!

[tbean1906]

Originally Posted by kristopher135@yahoo. om

i had an earlier post back on page 129 about the internet not working and even after going to the files and installing the push internet cab, my tp still will not use a data connection while having bluetooth turned on... any other suggestions?

Visit this link http://forum.ppcgeeks.com/misc.php?d...hments&t=58002

Install the CMYLXGOs.Bluetooth.and.Data.Fix.cab works like a charm. May need to restart - I don't think I did though.