Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team

[dtownsboy]

thanks for this unlocked and installed my first custom rom

[razorloves]

Originally Posted by mikezpc

Hey guys i just picked up a sprint touch pro that has some issues and needs to go to HTC's repair company(pcd) for repairs under warranty, it had the stock rom, i didn't try to flash anything on it but i do see in the bootloader
RAPH800
SPL-0.40.0000

not sure if that's the stock spl or not, when i had a tp before it had spl 0.37 and the same goes for the unlocker in the first post.

does that seem right or should i do anything before i send it for repairs ?

Thanks

.40 is a stock spl, just a newer one. you're good to go.

[chrialex]

I noticed that as well on a replacement from TheSignal.com (US Cellular's insurance) and was wondering if the difference between them is worth knowing. In other words, would it be worthwhile to put .40 on in place of .37?

[nuniiblack]

Originally Posted by captblaze

this thread is to get your phone unlocked so you can flash to a custom rom... If you are updating your rom from the device maker or carrier you dont need to unlock...

ok well i have flashed my sprint tp1 to cricket already and have the stock rom with everything working when it wants to lol. Im havinf=g trouble with my wap but i would like to get a new rom but when i try it doesnt work is it because i have to have a sd card?

[mkturner74]

As soon as I ran the 'Manual' exe from my Verizon TouchPro2 the device screen went black and device is now unusable. Won't boot, hard or soft reset, nothing. Battery out and restarted but won't even fire up.

Any suggestions?

Originally Posted by cmonex

UPDATE: VZW SPL posted. (there will be an all-in-one unlocker later, but until then please read the instructions and decide which file is for your device.)


CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you!

SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!!

there are three HSPL's now (for the non-verizon ones it is a similar scene to Diamond_C).

1. 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc.

2. 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands.

3. 0.35 for Verizon touch pro's ONLY.


Important:

first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!


preparations before flash:

1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).


instructions:

1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).

NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.

NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.

NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.

NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.

NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.

--------------------------------------------------------------------------

Finally, Please Donate to the CDMA Raphael Project Team - http://shorl.com/frastijeketrebo - Thanks!!

[nubbert]

oops nevermind. deleted post

[mikezpc]

Originally Posted by razorloves

.40 is a stock spl, just a newer one. you're good to go.

Thanks alot i'll send it out. there are so many problems with it, i hope they wont say anything and just fix it all or replace it lol

[i3ladeX]

You people are genious! Now i can return this dam TP1

[iloathehtc]

I've been pm'ing everyone that may have insight into an issue I'm having, figured I'd try here too.

Bought a used tp (xv6850, verizon) running an ssk rom. I tried to take it to my carrier (metropcs); they told me they couldn't do anything with it because they couldn't access the data programming (##data# or whatever it is supposed to be for the tp, I've not been able to get any ##blank# commands to work at all) so I figured a different rom needed to be put on it. I studied cmonex's method, acquired all the necessary software, researched some more then tried loading mightyrom. After the rom was loaded, it would just hang at the verizon loading screen and...nothing. I could get into bootloader no problem so I read up on the "flash dance" and gave it a try. When I load bootloader it reads:

Security Unlocked

raph500
spl-0.40.0000
microp-raph (led) v8182
microp-raph (key) v0682
psoc-raph stage_evt v20

I have tried loading roms via sd card with the RAPHIMG.nbh method; nothing loads. When I enter bootloader it goes directly to the tricolor screen with the above info and thats it. Trying to run ruu from my laptop always results in an error 262, unless it's the stock verizon rom. All attempts to use cmonex's hardspl solution have failed. All attempts to load any other rom fail. I can easily access bootloader...that's about it. Any ideas? I've been working on this for a week now, I've tried asking everyone. It was running an ssk rom when I first got it so I know it's not impossible. I'd really like to figure this out so I can dump my crappy Samsung Instinct (the Jitterbug of touchscreen phones). Thanks in advance.

[mikezpc]

Originally Posted by iloathehtc

I've been pm'ing everyone that may have insight into an issue I'm having, figured I'd try here too.

Bought a used tp (xv6850, verizon) running an ssk rom. I tried to take it to my carrier (metropcs); they told me they couldn't do anything with it because they couldn't access the data programming (##data# or whatever it is supposed to be for the tp, I've not been able to get any ##blank# commands to work at all) so I figured a different rom needed to be put on it. I studied cmonex's method, acquired all the necessary software, researched some more then tried loading mightyrom. After the rom was loaded, it would just hang at the verizon loading screen and...nothing. I could get into bootloader no problem so I read up on the "flash dance" and gave it a try. When I load bootloader it reads:

##diag# which is ##3424# works for me, using a sprint touch pro and it opens up DMRouter, and then have them plug it into houdini and that should get it to recognize it and install the drivers. sometimes you have to do it twice, and also don't press the call button when u hit the last # it should open up by it self. let me know what happens