[10-11-11][ROM] gingerbread-evo-deck [1.3][2.3.7 Stable] #Stablistic

[thaisport_sf]

Originally Posted by okashira

would like to see your charging logs if you don't mind posting them up.

Can anyone explain a proper procedure for replacing decks SBC kernel with one of the non SPC kernels here?

No problem, I posted up the logs attachments. Key things to look for:

When the battery first reaches 100%, you will notice it is still charging. This is because there is more charging room, especially since I use a 3500 mAh battery. In a standard EVO battery, it will still charge as well as there is still room to charge even at 100%.

You will also notice that it will eventually taper off to between 6ma-10ma and have a consistent pattern.

What happens in SBC is that your phone will do step charging instead of one constant flow. Once it detects your battery to be truly full, it will only step charge charge the amount of energy it takes for your phone to remain in that sleep/standby mode. Think of it this way, it's like someone taking a penny out of your penny jar and you putting it back in. You only put in enough to keep the jar full but never going overboard.

Hope that helps.

As for non sbc kernel just download the one that doesn't say SBC on it:

Tiamat AOSP Kernels :: Tiamat_Evo

[Hidavi]

4g tethering is very slow...

[thaisport_sf]

Max temp while charging while using the phone: 100.5F (was playing games)

Lowest temp while charging phone: 71.2F (not in use and fully charged trickling at 10mA per min)

Average temperature range fluctuate depending on the temperature of the surrounding environment hence hot days & warmer house will produce higher charging temps. Cold nights if you leave the window open like I do can produce lower temps but these fluctuations are minimal and at most several degrees.

[buck1623]

Originally Posted by thaisport_sf

I can show you my logs if you like... but at night, the only time it is even close to 90 during charging is when I'm heavily using it, meaning gaming. For me not using it and charging means temps around 78*f.

My phone also has 3 layers of protection on it (hard inner shell, soft rubber shell, and hard outer shell). It is also normally on the bed or desk next to my bed. Never any issues.

Understandable as you are using it as you charge... hell I've had it at about 105 charging and using at the same time. This guy is saying idle charge 90 degree temps... lol I like how there is a little tab underneath the cursor when you want to make a change... much better then mistyping and trying to pinpoint it...

Sent from my PC36100 using Tapatalk

[danielpat89]

I figured out my prob with titanium backup after flashing pre 7, it was the app that was screwed up which is what i figured, updated the app last night and got all my apps back. Deck this is the BEST rom yet (pre7), everything is smooth as hell and very responsive, i ran cm7 stable for a week after rc10 and this is way better then that even. thanks for the work, i might not even flash the final build lol, everythings perfect so far

[LoCoBoi187]

Hey deck, can you make sound damping work for Sprint Navigation, or even Google Nav? The sound only damps for 2 secs while the navigation lady speaks for about 10. EDIT: this is so my music wont get mumbled in with navigation instructions. thanks man

[thaisport_sf]

Here's the attached files... sorry had to Zip them because the txt was bigger than the upload limit.

[hachiroku]

i have one issue with the GPS. not sure if its even an issue with the customized rom, gingerbread in general, or the apps.

when i am using google maps, gps works perfect
when i use yelp, the gps signal is 30 minutes late
when i use facebook the gps signal is 30 minutes late

late meaning, it says i'm at a location i was 30 minutes to an hour prior and wont' update. google maps shows my location exactly where i am at.

[emd2009]

http://www.cyanogenmod.com/blog/cyan...update-release

GPS and 720p fixed!

[rushco]

Originally Posted by emd2009

http://www.cyanogenmod.com/blog/cyan...update-release

GPS and 720p fixed!

qsd8x50: Fix 720p video playback

Not 720p video recording. (for those who might be confused)

Also, new stock kernel with the proximity sensor fix.