[Discontinued] PowerROMv5-SenseUI & 4.8.5 [Titanium] Sprint

[Trident]

Originally Posted by The00Stranger

Yes I cleared storage. I'm using the latest Titanium rom. Try it out, see if it does the same for you. You don't have to have an Exchange server to test it, just go to the Activesync program, see if you anything on the touchscreen works. I was able to setup the server by srolling down with the hardware button, but I still can't use the touchscreen from the activesync program. See if you can - I'll re-flash if someone else is able to get anything to work there.

Are you saying that you run ActiveSync when the phone isn't connected via USB?
I think I see what you're saying. When I open the ActiveSync program manually, there seems to be an issue with the touchscreen responding. But A/S is working normally.
Is this an issue because you have to setup something manually in A/S that can't be done from the server/pc side?
Something very interesting that I found just now. I can use the touchscreen when I am viewing the screen on my pc (using SOTI PocketControllerPro), but not when I physically touch the screen.
I can't imagine that this has anything to do with the way that I made the ROM- but I'll see if I can do some research and check it out.

[Riley]

Originally Posted by Trident

Are you saying that you run ActiveSync when the phone isn't connected via USB?
I think I see what you're saying. When I open the ActiveSync program manually, there seems to be an issue with the touchscreen responding. But A/S is working normally.
Is this an issue because you have to setup something manually in A/S that can't be done from the server/pc side?
Something very interesting that I found just now. I can use the touchscreen when I am viewing the screen on my pc (using SOTI PocketControllerPro), but not when I physically touch the screen.
I can't imagine that this has anything to do with the way that I made the ROM- but I'll see if I can do some research and check it out.

Hi Trident, if you are using OMJ kitchen, he added a patched biotouch.dll selection in the sip area. this breaks activesync. If you deselect this, and recook, activesync screen works again. I noticed this last week. Also, if you delect the biotouch.dll from the windows directory, this should fix the problem without reflashing. there may be a side effect from this. for me it caused my ability to scroll in email view to stop, but I was able to set up active sync again. I personally just recooked without the patched dll and called it a day. Hope this helps.

[Trident]

Originally Posted by rileyd5

Hi Trident, if you are using OMJ kitchen, he added a patched biotouch.dll selection in the sip area. this breaks activesync. If you deselect this, and recook, activesync screen works again. I noticed this last week. Also, if you delect the biotouch.dll from the windows directory, this should fix the problem without reflashing. there may be a side effect from this. for me it caused my ability to scroll in email view to stop, but I was able to set up active sync again. I personally just recooked without the patched dll and called it a day. Hope this helps.

Personally, I don't care. I like the biotouch SIP and never have to mess with A/S on the device- it still works and syncs fine.
But I'll cook a version without it if it's needed for someone else.
Thanks for the fix!

[The00Stranger]

Trident -
I don't use Activesync for connecting to pc much, well I guess I do every time I flash . I need activesync on the phone to connect to an Exchange server over the internet. I was able to set up Exchange / Activesync on the phone but I couldnt' change server settings - I couldn't stop "push" and go to manually sending and recieving.

I would appreciate the fix that rileyd5 talked about! I remember this being an issue with another rom as he described.

[The00Stranger]

Originally Posted by Trident

Personally, I don't care. I like the biotouch SIP and never have to mess with A/S on the device- it still works and syncs fine.
But I'll cook a version without it if it's needed for someone else.
Thanks for the fix!

This has been an issue for while, I wonder, I hope someone is working on a fix for the biotouch sip, I like it also.

[Riley]

Originally Posted by The00Stranger

This has been an issue for while, I wonder, I hope someone is working on a fix for the biotouch sip, I like it also.

Yes, I agree with you. the only workaround seems to be the install sip approach each time to change sip which Groove put out there a while back. I find myself missing c qwerty too much so I end up cooking a 1.5 ezinput and fingerkeyboard so I get the best of both worlds. lol.

[Trident]

Originally Posted by The00Stranger

Trident -
I don't use Activesync for connecting to pc much, well I guess I do every time I flash . I need activesync on the phone to connect to an Exchange server over the internet. I was able to set up Exchange / Activesync on the phone but I couldnt' change server settings - I couldn't stop "push" and go to manually sending and recieving.

I would appreciate the fix that rileyd5 talked about! I remember this being an issue with another rom as he described.

Originally Posted by The00Stranger

This has been an issue for while, I wonder, I hope someone is working on a fix for the biotouch sip, I like it also.

Originally Posted by rileyd5

Yes, I agree with you. the only workaround seems to be the install sip approach each time to change sip which Groove put out there a while back. I find myself missing c qwerty too much so I end up cooking a 1.5 ezinput and fingerkeyboard so I get the best of both worlds. lol.

Ok. I guess I'll do the exact same build without BioTouch.
I can't stand FingerKeyboard- I don't know why. It just never seems to work right for me. I do like TouchPal, so maybe I'll try this new build with that. (I don't think there is an EXT for it, so it will just be installed by cab... or by Sashimi if I can get that working correctly!)
No time today, but I'll do this by the weekend.

[mwalt2]

Originally Posted by Trident

Ok. I guess I'll do the exact same build without BioTouch.
I can't stand FingerKeyboard- I don't know why. It just never seems to work right for me. I do like TouchPal, so maybe I'll try this new build with that. (I don't think there is an EXT for it, so it will just be installed by cab... or by Sashimi if I can get that working correctly!)
No time today, but I'll do this by the weekend.

You can always make an EXT package from the touchpal cab. Also, have you tried Swype? I used to use touchpal, but now use swype almost all of the time.

[Trident]

Originally Posted by mwalt2

You can always make an EXT package from the touchpal cab. Also, have you tried Swype? I used to use touchpal, but now use swype almost all of the time.

I've heard of it... but I don't see a way to get it... is there a download available?
>>>>>>>>>>>
HOLY COW.
I found a cab for it and installed it. I was a little edgy about installing an 8MB SIP, but figured I could uninstall or just reflash if I didn't like it. I think I like it. I'll try it for a few days until I reflash this weekend- but this could be a winner.
Thanks.

[mwalt2]

Originally Posted by Trident

I've heard of it... but I don't see a way to get it... is there a download available?
>>>>>>>>>>>
HOLY COW.
I found a cab for it and installed it. I was a little edgy about installing an 8MB SIP, but figured I could uninstall or just reflash if I didn't like it. I think I like it. I'll try it for a few days until I reflash this weekend- but this could be a winner.
Thanks.

Yeah, unfortunately it uses bmp's for the skins. It would be lots smaller if they would have used png's. I've attached the cab I've edited. I think it only takes up about 6 mb. I removed some of the tutorial images and also increased the size of the skin so that it takes up about 1/2 of the screen when it's deployed in portrait. It works fine when installed to internal storage as well.