OTA Sprint PRL update on Juicy

[statepkt]

FYI, for all the Sprint people who don't what their MSL is:

I found this procedure on the xda forum and it works!!

I found a method that actually worked perfectly...

Use this method. I don't know who found it, but credit goes to them.

Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.

* Return the values back to what they were (most likely 0) waiting the same amount of time as above.

* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~


The numbers next to the Rx: +HTC_RMSL line should be your MSL

[shakuyi]

yea i find it very odd that corolada doesn't have the updated prl they used to be ON THE BALL with that

[ce tiger]

[quote=statepkt;470115]FYI, for all the Sprint people who don't what their MSL is:


Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.


after changing the registry and soft-reset the .txt file is not being created.
please help

[opuscroakus]

Originally Posted by ce tiger

FYI, for all the Sprint people who don't what their MSL is:


Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.


after changing the registry and soft-reset the .txt file is not being created.
please help

Did you wait long enough? You have to give time for the registry to be written before the soft-reset. This worked for me.

[statepkt]

[QUOTE=ce tiger;470894]

Originally Posted by statepkt

FYI, for all the Sprint people who don't what their MSL is:


Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.


after changing the registry and soft-reset the .txt file is not being created.
please help

I think you figured out your problem from the other thread right?

[mswlogo]

Sprint automatically sent out the PRL update OTA in the early hours Friday.

The phone was hung with the PRL updating message but it appears have taken.

[maddoghoek77]

I would like to thank whomever it was that found this registry edit. I just got one of these new in the box and was getting nervous that I was not going to be able to "flip" it to Cricket... Thanks to this thread, I have my snazzy new Diamond on Cricket! Thanks again.

Maddog~

[Brock1909]

Originally Posted by maddoghoek77

I would like to thank whomever it was that found this registry edit. I just got one of these new in the box and was getting nervous that I was not going to be able to "flip" it to Cricket... Thanks to this thread, I have my snazzy new Diamond on Cricket! Thanks again.

Maddog~

you can also use advanced config. to do the reg edit.

[shakuyi]

Originally Posted by statepkt

FYI, for all the Sprint people who don't what their MSL is:

I found this procedure on the xda forum and it works!!

I found a method that actually worked perfectly...

Use this method. I don't know who found it, but credit goes to them.

Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.

* Return the values back to what they were (most likely 0) waiting the same amount of time as above.

* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~


The numbers next to the Rx: +HTC_RMSL line should be your MSL

confirmed this works too

[statepkt]

Glad it helped you guys