Not receiving calls on FRX07.1

[rgviewer]

I have a question about the "FRX07.1_Full_Bundle_20110901". First off I have Rhod400 TP2 with CDMA. I put this build on my phone the other day and tested data and incoming and outgoing calling using my sons phone. All was good.

Except last night a few people called my sons phone trying to get a hold of me, they said they called my phone but was sent to voice mail. I was wondering if anyone else is having problems with this. Could it be that when it is in sleep mode the radio shuts off not letting me receive calls?

I really like this build and would love to go full time on android but if people cant reach me, then Im stuck with WinMoble. Any suggestions.

[arrrghhh]

See detule's post. We're working to get it permanently fixed, thanks.

[rgviewer]

Thanks for the quick reply, but not quite sure what he meant by:

"Then, bind mount the "old" RIL in your froyo.user.conf file.


Code:
mount --bind /sdcard/libhtcgeneric-ril.so /system/lib/libhtcgeneric-ril.so

Put it in the CustomCommands section at the bottom of the user.conf file."

Sorry for still being such a newbie, any more help would be much appreciated.
Thanks

[arrrghhh]

Originally Posted by rgviewer

Thanks for the quick reply, but not quite sure what he meant by:

"Then, bind mount the "old" RIL in your froyo.user.conf file.


Code:
mount --bind /sdcard/libhtcgeneric-ril.so /system/lib/libhtcgeneric-ril.so

Put it in the CustomCommands section at the bottom of the user.conf file."

Sorry for still being such a newbie, any more help would be much appreciated.
Thanks

Edit the froyo.user.conf file, put that line in the CustomCommands section. What is missing...? What are you not grasping? Sorry if I'm confused, it seems pretty straightforward to me.

froyo.user.conf is in the /conf directory where ever you run haret.exe from.

[rgviewer]

I am sorry I think I got it figured out, just needed more reading, Thanks again for your help.

[arrrghhh]

Originally Posted by rgviewer

I am sorry I think I got it figured out, just needed more reading, Thanks again for your help.

Moar reading is never a bad thing. Let me know if you have any more questions, and certainly if it doesn't resolve the missed calls issue... .

[rgviewer]

ok, I think I might of figured it out, this is what I did:
1. I put the libhtcgeneric-ril.so in the root of my sd card.
2. I went into conf folder and added "mount --bind /sdcard/libhtcgeneric-ril.so /system/lib/libhtcgeneric-ril.so} to the bottom of the froyo.user.conf.

It now looks like this:
# General parameters
general{
renice=1 # Run the renice script to inprove call answering
}
#compcache related parameters
compcache{
compcache_en=1 # enable(1) or disable(0)20 compcache
cc_disksize=100 # Ram swap disksize - any number between 1 to 98 should work; default is 1/4 of the RAM (24)
cc_memlimit=64 # Limit the memory usage for backing swap (cc .5x known issue-defaults to 15% of total RAM)
cc_backingswap_en=0 # enable(1) or disable(0) backing swap
cc_backingswap=/dev/block/mmcblk0p4 # pointing to the backingswap partition device, swap
}
#create swap file for compcache or linux swap
swap_file{
swap_file_en=0 # set to 1 to create swap file
# set to 0 to del the swap file
linux_swap_file_size=32 # swap file size in MB
linux_swap_file=/sdcard/swapfile # pointing to the swap file location ( must be /system/sd/)
}

#Linux swap parameters
#
# linux swap can only be enabled if cc_backingswap_en is set to "0"
#
linux_swap{
linux_swap_en=0 # enable(1) or disable(0) linux swap
linux_swap_partition=/dev/block/mmcblk0p4 # swap partition device
}
#virtual memory
sys_vm{
sys_vm_en=1 # enable(1) or disable(0) virtual memory configurations
swappiness=0 # default 60
page_cluster=0 # default 3, (0 since CM3.9.6+)
laptop_mode=5 # default 0
dirty_expire_centisecs=3000 # default 3000
dirty_writeback_centisecs=1500 # default 500
dirty_background_ratio=3 # default 5
dirty_ratio=5 # default 10
vfs_cache_pressure=200 # default 100 (tendency of the kernel to reclaim cache memory)
overcommit_memory=1 # default 0 (0=Heuristic 1=Always overcommit 2=Don't overcommit)
overcommit_ratio=80 # default 50 (% of Physical+Virtual memory to allow allocation)
}

# custom shell commands, these commands run last
custom_shells{
chmod 777 /etc/dbus.conf
#echo 2 > /sys/devices/platform/msm_hsusb/usb_function_switch
rm -f /sdcard/fsck*.rec
modprobe ipv6
modprobe xt_owner
modprobe ipt_REJECT
#echo "Hello!!!" # example
#echo "You can create your own commands here" # example
mount --bind /sdcard/libhtcgeneric-ril.so /system/lib/libhtcgeneric-ril.so
}


I will test further and see if it made a diference in missing calls. Thanks everyone.

[Paran0idAndr0id]

I had the same issue and just installed the latest frx071 zip in the download section yesterday, but once I made an outgoing call I could receive calls and txt msgs. I don't use google voice, but this is seems to only be an issue on initial boot.

[rgviewer]

Yes, I also figured that out that an out going call must be placed after initial booting into android. Then I can receive calls and txt. Not a bad trade off, just have to remember to make that first call before I miss any.

Keep up the great work, love my new TP 2 Android.

[mountainwampus]

Originally Posted by rgviewer

Yes, I also figured that out that an out going call must be placed after initial booting into android. Then I can receive calls and txt. Not a bad trade off, just have to remember to make that first call before I miss any.

Keep up the great work, love my new TP 2 Android.

I also have been missing calls in 7.1 (never missed a call using 7.0, never missed a text in either). I found that if I set WinMo to Airplane mode before booting Android, calls come in fine. This might be easier than placing an out going call.