my rhod500 freezer at startup

[binht611]

my rhod500 freezer at startup in recent roof and kernel.
when boot in to home screen, it freezer at here and report no servise in operator. the device still respose but very very slow.
update roof and kernel no fix this problem
try older roof and kernel no fix this problem
reformat and replace sd card still no fix.
i try to flash another radio and rom but no luck

now, i try frx03+11/15 roof+ 12/04 kernel but still no servise and system very very slow.
who can help me to fix it please!

my english is very bad. i hope everybody understand me and help me to fix this problem

[arrrghhh]

Hrm... radio/ROM has no effect on Android - I mean the radio might, but would effect WinMo the same way in theory.

So post your startup.txt, I'm wondering what's in thar...

[binht611]

Originally Posted by arrrghhh

Hrm... radio/ROM has no effect on Android - I mean the radio might, but would effect WinMo the same way in theory.

So post your startup.txt, I'm wondering what's in thar...

this is my startup.txt

set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2292
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 msmts_calib=0x9f.0x39a.0x35c.0x78 msmvkeyb_toggle=off pmem.extra=1 force_cdma=0 gsensor_axis=2,1,3 pm.sleep_mode=2 acpuclock.oc_freq_khz=716800 rel_path=andboot hw3d.force=1 physkeyboard=rhod500"
boot

[itzdarave]

make sure your not overclocking when u start up.

[boredandtattooed]

you can overclock for startup, just not on MAX... i start up on the middle option daily...

[arrrghhh]

Originally Posted by boredandtattooed

you can overclock for startup, just not on MAX... i start up on the middle option daily...

Anyone can overclock, but if stuff isn't working I'd like to remove that variable.

Originally Posted by binht611

this is my startup.txt

set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2292
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 msmts_calib=0x9f.0x39a.0x35c.0x78 msmvkeyb_toggle=off pmem.extra=1 force_cdma=0 gsensor_axis=2,1,3 pm.sleep_mode=2 acpuclock.oc_freq_khz=716800 rel_path=andboot hw3d.force=1 physkeyboard=rhod500"
boot

I made some changes. Remove the things in red/bold. Might also want to try deleting your data.img, and booting. Then wait... Leave your phone for a little bit after it's booted up, so it has a little bit of time to work out its demons.

Also, you have a RHOD500? Do you use it on a GSM network or CDMA...? If you're on CDMA, that force_cdma=0 needs to =1.

[binht611]

Originally Posted by arrrghhh

Anyone can overclock, but if stuff isn't working I'd like to remove that variable.



I made some changes. Remove the things in red/bold. Might also want to try deleting your data.img, and booting. Then wait... Leave your phone for a little bit after it's booted up, so it has a little bit of time to work out its demons.

Also, you have a RHOD500? Do you use it on a GSM network or CDMA...? If you're on CDMA, that force_cdma=0 needs to =1.

i will try removing the things in red, deleting data.img and don't touch my phone in 10 minutes after it reboot.
my phone is rhod500 but i use it on gsm network so that i set cdma=0 .

I hope it working.

[binht611]

my problem maybe fixed. i will test someday and report result!

[binht611]

my tp2 work stable now. i dont know why it is but i thinks it need one day for stable working after installation. i hope everybody understand me because of my english is very bad . thanks all.