12.19 3d package with better performance for testing
 

12.19 3D PACKAGE WITH BETTER PERFORMANCE FOR TESTING

ok. guys this is my 3d package i'm getting 22 fps on neocore quadrant 675

PLEASE READ.

1-you have the following. 3d driver 11.26 and 11.29 with gralloc 11.29. you have 2 extra drivers,libGLESv2_adreno200.so, and libq3dtools_adreno200.so. also bootanimation.zip, build.prop, froyo.user.conf, initrd.gz, rootfs.img, STARTUP.TXT, (ts-calibration for RHOD), and zimage and modules.

NOW. combination. all the new kernel updates with 3d 11.26 won't work. you will get a lots of flicakering. if you want to use 11.26 to test the performance use the zimage and module from the package. 3d 11.29 all the kernel updates works fine.

2- guys on your startup make sure is basic. only what you devices use to run. why i said this, because people put a lot of crap inside the startup.

3- im using rootfs.img 11.08 and initrd.gz 08.18 they works great for me.

4-3d drivers was openGLE ES-CM 1.0 now it reads openGLE ES-CM 1.1, was MSM7500 now it reads MSM7230. YOU CAN CHECK THIS USING QUADRANT SYSTEM INFO.

5- REMEMBER GUYS THIS IS ONLY A TEST. PEOPLE WILL HAVE DIFFERENT PERFORMANCE THEN OTHERS.
put everything on root sd card. bootanimation.zip,build.prop,(froyo.user.conf goes in your conf file), initrd.gz, modules and zimage, rootfs.img,(STARTUP.TXT use the one that you use for your devices), (ts-calibration use the one that you use for your devices), 3d drivers plus gralloc.

6-"WIFI" WE KNOW PEOPLE HAVING PROBLEM WITH WIFI, PLEASE FIND WHAT KERNEL THAT WORKS FOR YOU. WE GETTING A LOTS OF KERNEL UPDATES,

7- "BATTERY TRICK" CHARGE YOUR PHONE TO FULL 100%. PHONE MUST BE OFF
The trick is simple. Turn off your phone, plug it into the charger WHILE IT'S OFF, and wait for the charging lights to show up. When you see it, turn on your phone (into winmo) and boot android via haret. Wait till android boots up and the battery logo is showing charging. Then you can disconnect the charger. I'm using FRX03 with the latest kernel,

8-MY GOAL WAS TO GET MY PHONE 21-24 FPS. 22 FPS IS NOT BAD. IM VERY HAPPY KOW.
GUYS. MY PHONE RUN OUTSTANDING.

9-HAVE FUN WITH IT. REMEMBER GUYS, THIS IS JUST A TEST.

10- THANKS


MEGAUPLOAD - The leading online storage and file delivery service

-----------------------------------------------------------------------
12.23 update
new build.prop 12.18. guys with this build.prop you will get all the free apps in market.
games, apps. i mean everything.

froyo.user.conf 12.23 with all the mount command files 3d driver, gralloc, and build.prop

1-important. i took this command out,"dalvik.vm.execution-mode=int:jit" a few people was having problem.

2- important. i'm going to prepare a package for everyone to try. this will include the following (startup, combination of drivers, build.prop, froyo.user.conf, zimage and modules, and this two new drivers libGLESv2_adreno200.so and libq3dtools_adreno200.so. I'm getting 22 fps on neocore and 675 quadrant. GUYS MY PHONE IS SO FAST AND STABLE THAT I CAN NOT BELIEVE IT. so stay tune. thanks
--------------------------------------------------------------------------------------------------------------
Latest Kernel
Commit# 1238
Commit Date: Sat Dec 18 20:44:32 2010
Commit ID: 43f0a96
Pushed by: ACL (on behalf of WisTilt2)
Commit Messages:

•1238 - Speakerphone mic fix.

http://www.megaupload.com/?d=MVUZIME1

------------------------------------------------------------------------------------------------------
FIRST POST UPDATED (RHOD)
New Kernel - Dec. 11, 2010 THANKS TO "F22"
zImage-2.6.27.46-01232-gb7033df
zImage-2.6.27.46-01232-gb7033df

modules-2.6.27.46-01232-gb7033df.tar.gz
Free File Hosting Made Simple - MediaFire

WITH THIS KERNEL I'M GETTING ON FPS2D 30PFS. NEOCORE 21.1FPS AND QUADRANT 601 IT AMAZING.
THIS IS GETTING GOOD GUYS TRY IT. THANKS
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
12.23.10.
froyo.user.conf updated with all 3 command lines 3d driver, gralloc, and build.prop
FOR NEW PEOPLE
THANKS
-------------------------------------------------------------------
—---------------------------------------------------------------------
Thank to ACL. We have and easy way to mount this using froyo.user.conf. Just edit froyo.user.conf and add this command lines.

mount bind/sdcard/libGLES_qcom.so /system/lib/egl/libGLES_qcom.so

mount bind/sdcard/gralloc.msm7k.so /system/lib/hw/gralloc.msm7k.so

mount bind/sdcard/build.prop /system/build.prop



GUYS, TAKE THE 3D DRIVER FROM THE ZIP FILE. AND PLACE IT IN THE ROOT. SD CARD.
------------------------------------------------------------------------------------------------------
NEOPEEK BUILDS

1- download rom
2- use linux or windows
3- (linux). Connect your sd card to you pc or use the usb cable (wm) and connect your phone to your pc. You will see fat32 and ext2 on your desktop. Double click ext2. Travel to SYSTEM/LIB/EGL/REPLACE 3D DRIVER HERE. SYSTEM/LIB/HW/REPLACE GRALLOC HERE.

4- (windows) fresh install.
Download winrar or 7zip. Open neopeek rom.
Open file(NPKINSTALL) then open androidinstall.tar.gz this is the ext2. Travel to. SYSTEM/LIB/EGL/REPLACE 3D DRIVER HERE. SYSTEM/LIB/HW/REPLACE GRALLOC HERE. good luck . thanks you

Re: 3d driver for testing
 

awesome booting it now.

Re: 3d driver for testing
 

I'm testing this with an older installation of Neopeek CM6 from before XDAndroid was capable of running Angry Birds.

I'm not sure if the interface in general is any better -- maybe a pinch, but it's hard to measure. I can certainly confirm that Gallery 3D runs very well now, Angry Birds Lite runs pretty well when there aren't heavy physics simulations going and the graphics glitches are improved (no more corrupt textures, but still missing landscape pieces), and Street View is now only a couple fps shy of "buttery smooth". The current Angry Birds on the market is visually perfect as far as I can tell, but it still runs very poorly.

All in all, a solid improvement. :)

Re: 3d driver for testing
 

it true. look great

ACL have a new 3d driver for
download. ( Angry Birds ) I couldn't see the logo with other driver, now I can see it. Looks great . Great job ACL. Thanks
forum . xda-developers . com/ showthread . php?
t= 852937

Re: 3d driver for testing
 

I wanna try this out but need help on how to mount it... tia

Re: 3d driver for testing
 

what build you're using?

Re: 3d driver for testing
 

hey tia me 2 i was able to do the froyo.user part but i dont understand how to do the libgles part of it plz explain thanks

Re: 3d driver for testing
 

Last I checked we're both using xandroid from this thread (you posted in there earlier)

http://forum.ppcgeeks.com/tp2-androi...reference.html

I too don't know what to do with the first file (libgles)

Re: 3d driver for testing
 

ok. very simple. you said you have the froyo. conf part down right. now you just add the driver to the root of your SD CARD. start Haret. and you done. the driver has to be in the root .SD CARD. thank you

Re: 3d driver for testing
 

hey thanks tiad i got it made sure i thanked you and great work

Re: 3d driver for testing
 

Maybe it's a noob question, but I can't acces the froyo.user.conf file.

I am using a neopeek build (SuperFroyo-Port). So i've formatted my sd-card in several partitions. (Fat32 partition and ext2). If i connect my phone (in WinMo) to the pc, i can only browse the Fat32 partition. But the froyo.user.conf file is on the ext2 partition. So i can't edit/replace the froyo.user.conf file

Can anyone help me, please?

Re: 3d driver for testing
 

I will update the first post. on how to do this with neopeek builds.

ok. do this. you have two options. 1. sync your phone and travel to your SD card, find the tar file with super froyo. you need some type of file opener that can open tar file. travel to SYSTEM/LIB/EGL/REPLACE THE OLD DRIVER HERE. 2. turn off your phone, take the SD card out and put into you PC. and do the same. you don't need to update you froyo.conf with neopeek build. good look. thank you

Re: 3d driver for testing. UPDATE 11.27.10
 

You could also go into terminal and edit the conf file with nano. I think you may have to chmod it first for more permissions. You can confirm its success after a reboot by running the mount command and looking for the relevent entry.

I did that, and the hardest part was working with the screwed up keymapping for the slashes, dashes, and underscores. :-)

Re: 3d driver for testing. UPDATE 11.27.10
 

Also, is the new 11.27.10 .so file something we should test? Is there anything different in particular?

Wirelessly posted (Sprint Touch Pro 2: Opera/9.80 (Windows Mobile; Opera Mini/5.1.21594/21.572; U; en) Presto/2.5.25 Version/10.54)

Gave this a try, knocks out the sound for some reason.Gallery worked much better than before, but not enough of a benefit to justify having it over sound. Good work though!

Re: 3d driver for testing. UPDATE 11.27.10
 

(screen tearing and flickering).

Re: 3d driver for testing. UPDATE 11.27.10
 

Good Luck! PPCGeeks.com » 3D Driver for The Touch Pro2? Maybe! ;)

Re: 3d driver for testing. UPDATE 11.27.10
 

Laos, check my comments on the article...

Re: 3d driver for testing. UPDATE 11.27.10
 

yup, sound seems to have gone with this, thanks for the alert

Re: 3d driver for testing. UPDATE 11.27.10
 

hey guys. sorry to hear that. to be honest I been using this file for about a month. I did not post it earlier because I was testing it. but to be honest I have 3 SD card.1- frx03, 2- neopeek super froyo, and 3 sense by LENINred. I haven't got that issue yet. and all three builds work great for me with file. thanks

Re: 3d driver for testing. UPDATE 11.27.10
 

Hey tiad i have a rhod 400 running xdandroid with frx03 and everything up to date and it seems to be working GREAT. it is so much more smoother than it was before I hope you can keep improving to this.

Re: 3d driver for testing. UPDATE 11.27.10
 

fellas i uploaded more test stuff on xda..

http://forum.xda-developers.com/show...=852937&page=4

Re: 3d driver for testing. UPDATE 11.27.10
 

I was tested the last once and have great performance with smoothly graphics. It has made my battery life longer because of lesser CPU load (enabled "Show running process" option in Development's settings), most applications go fast even in some heavy load game/application. I'm going to try the new version 11.27.

Thank you so much for provide this driver for testing purpose, tiad8
xdAndroid gain much stable for daily use now.

---
Best regard!
Uoc Nguyen

This driver is fantastic! Makes a huge difference all around. From on screen keyboard response to Angry Birds everything is more crisp and immediate than before. Great contribution, I look forward to more progress in this department!

Sent from my MSM using Tapatalk

Re: 3d driver for testing. UPDATE 11.27.10
 

Hey invincibleliving you might want to go to
3d driver for testing. UPDATED 11.27.10 - Page 4 - xda-developers

and help ACL test the gralloc to help contribute to get the performance even better. But the new 3d driver is amazing

Wirelessly posted (Opera/9.80 (Windows Mobile; Opera Mini/5.1.21594/21.572; U; en) Presto/2.5.25 Version/10.54)

Thanks for all your work ACL. I'll post that modded rootfs in about 10 hours when I wake up and get to work, that is if no one else does.

Re: 3d driver for testing. UPDATED 11.29.10
 

On older builds of Froyo: is \SD Card\andboot\conf\eclair.user.conf the same thing as froyo.conf?

Re: 3d driver for testing. UPDATED 11.29.10
 

Hey tiad I think I did everything right because things seem ALOT smoother but just to clarify about the froyo.conf part I just put the in the conf folder and that is it right? Because I dont know how to edit the froyo.conf. If it is wrong could you help me plz thanks a lot

Re: 3d driver for testing. UPDATED 11.29.10
 

what operation system are you using Linux or windows on pc?. thanks

Re: 3d driver for testing. UPDATED 11.29.10
 

I'm using Windows. I'm also not sure how to edit the file.

Re: 3d driver for testing. UPDATED 11.29.10
 

Just download the one from the thread and use that one. It is pre-edited. you need not edit your own froyo.conf file.


I found that after mounting the new 3d driver, angry birds was faster (still not anywhere close to where it is on the shipped with android devices) I could see the logo ect.

My sound works.

My phone does reset randomly. But that may have to do with my XDAndroid build I'm using. It is the most recent. I start fresh with whatever latest XD Android build is released.

Thank you so much for enhancing the Windroid experience.

Re: 3d driver for testing. UPDATED 11.29.10
 

O sorry tiad im also using windows on my laptop. o and it is windows 7 if that makes a difference

Re: 3d driver for testing. UPDATED 11.29.10
 

in windows use (WORDPAD)
IT'S GOING TO LOOK LIKE THIS. SEE BOTTOM PAGE

# General parameters
general{
renice=1 # Run the renice script to inprove call answering
}
#compcache related parameters
compcache{
compcache_en=1 # enable(1) or disable(0)20 compcache
cc_disksize=100 # Ram swap disksize - any number between 1 to 98 should work; default is 1/4 of the RAM (24)
cc_memlimit=64 # Limit the memory usage for backing swap (cc .5x known issue-defaults to 15% of total RAM)
cc_backingswap_en=0 # enable(1) or disable(0) backing swap
cc_backingswap=/dev/block/mmcblk0p4 # pointing to the backingswap partition device, swap
}
#create swap file for compcache or linux swap
swap_file{
swap_file_en=0 # set to 1 to create swap file
# set to 0 to del the swap file
linux_swap_file_size=32 # swap file size in MB
linux_swap_file=/sdcard/swapfile # pointing to the swap file location ( must be /system/sd/)
}

#Linux swap parameters
#
# linux swap can only be enabled if cc_backingswap_en is set to "0"
#
linux_swap{
linux_swap_en=0 # enable(1) or disable(0) linux swap
linux_swap_partition=/dev/block/mmcblk0p4 # swap partition device
}
#virtual memory
sys_vm{
sys_vm_en=1 # enable(1) or disable(0) virtual memory configurations
swappiness=0 # default 60
page_cluster=0 # default 3, (0 since CM3.9.6+)
laptop_mode=5 # default 0
dirty_expire_centisecs=3000 # default 3000
dirty_writeback_centisecs=1500 # default 500
dirty_background_ratio=3 # default 5
dirty_ratio=5 # default 10
vfs_cache_pressure=200 # default 100 (tendency of the kernel to reclaim cache memory)
overcommit_memory=1 # default 0 (0=Heuristic 1=Always overcommit 2=Don't overcommit)
overcommit_ratio=80 # default 50 (% of Physical+Virtual memory to allow allocation)
}

# custom shell commands, these commands run last
custom_shells{
chmod 777 /etc/dbus.conf
#echo "Hello!!!" # example
mount --bind /sdcard/libGLES_qcom.so /system/lib/egl/libGLES_qcom.so
}

Re: 3d driver for testing. UPDATED 11.29.10
 

Used Droid Explorer to replace sdcard/system/lib/egl/libGLES_qcom.so on Froyo reference build and it worked! 3D is definitely improved and Angry Brids is almost tolerable to play, Galery (3D) works nicely, overall video performance is better in the OS. Incredible! Awesome work!

Re: 3d driver for testing. UPDATE 11.27.10
 

tiad8, sorry for the incorrect reporting,

It was my fault of not reading the instructions completely (I placed libGLES_qcom.so in /andboot instead of / ).
Fixed that, and the sound is working fine and video is working better.

sorry about that. Thanks for posting the drivers

Re: 3d driver for testing. UPDATED 11.29.10
 

Hey tiad thanks a bunch you completely explained it too me and now it is working perfectly once again thanks for taking time and explaining it to me

Re: 3d driver for testing. UPDATED 11.29.10
 

Well crap, I totally forgot to post this when it finished. Here's the modded rootfs for those on Haret. Building the NAND one right now.

http://dl.dropbox.com/u/11790134/roo...29-42b44e2.img

Edit: If you managed to download it in the first 5 minutes, I forgot to remove the part where it overwrites gralloc for wvga. You will have to re-download it if that was the case.

Re: 3d driver for testing. UPDATED 11.29.10
 

+1, thanks much Tiad! Very much appreciated!!

Re: 3d driver for testing. UPDATED 11.29.10
 

no problem. thank you for testing this. also thank ACL. I'm working on a few ideas to improve 3d. I believe our phones has some juice left. so stay tune. thanks

Re: 3d driver for testing. UPDATED 11.29.10
 

Thanks dood.. also i posted a dev only thread on xda. I need more animals involved so we can get this stuff done.

3d Enhancement (dev only) - xda-developers

Modifying gralloc is pretty easy so let me know if you want to get involved.