[TESTING] - NAND OMGB (1.2.3) - Page 51

anish88 · #1 (**permalink**) 12-12-2011, 03:30 PM

Quote:

Originally Posted by arrrghhh

This build doesn't include the new acoustic code yet. Once that has settled and is solid, I'm sure it can be implemented and (holds breath) hopefully all of the audio routing problems are solved, magically.

Even the 3.5mm will start working too?

**[ACL]** · #2 (**permalink**) 12-12-2011, 03:48 PM

Quote:

Originally Posted by anish88

Even the 3.5mm will start working too?

No, 3.5mm is not working because we aren't initializing some hardware. Its a bit confusing because the interrupts for the gsensor are the ones that drive the 3.5mm detection (crazy htc guys).

But its on my list of things to do.

anish88 · #3 (**permalink**) 12-12-2011, 03:56 PM

Quote:

Originally Posted by [ACL]

No, 3.5mm is not working because we aren't initializing some hardware. Its a bit confusing because the interrupts for the gsensor are the ones that drive the 3.5mm detection (crazy htc guys).

But its on my list of things to do.

Ok let me know if I can do anything to help

**arrrghhh** · #4 (**permalink**) 12-12-2011, 03:51 PM

Quote:

Originally Posted by anish88

Even the 3.5mm will start working too?

As ACL stated, the 3.5mm jack not working is not related to any userland audio routing problems, it is a kernel issue.

huckl3b3rry · #5 (**permalink**) 12-12-2011, 07:21 PM

Actually let me clarify that a little better, I test the was technically trying the "hands-free profile" because I was doing in my car, but "hands-free" has the same audio routing issue that the "headset profile" has. It's only the "A2DP" profile that is working.

huckl3b3rry · #6 (**permalink**) 12-12-2011, 07:23 PM

Boy, you wouldn't know from that last post that English is my first language.

Guess I shouldn't type these things while I'm trying to work.

vzihome · #7 (**permalink**) 12-14-2011, 06:09 PM

Quote:

Originally Posted by milda25

One finding: As I already wrote I have no signal on my Rhod100, but some registration to network is done (autoconfig APN and so on). Now I'm found during my play with OMGB without signal I have incomming call from my wife (oops

). In her phone she heared that my phone is inaccessibilited. In our country operator (provider) always sending SMS about missed call if the called phone is off (power off/out of signal). In this case no SMS about missed call has been send. It probably means, that my operator think I'm online, even if I'm not. May be help you ...

Try switching into airplane then reboot(when switching to airplane mode it doesn't actually switch until you restart) then after you restart switch back to airplane off reboot (same as above) it worked for me when I was having issues don't know if its related I'm on sprint rhod400

Sent from my Touch Pro 2 using Tapatalk

**arrrghhh** · #8 (**permalink**) 12-14-2011, 06:24 PM

Quote:

Originally Posted by vzihome

Try switching into airplane then reboot(when switching to airplane mode it doesn't actually switch until you restart) then after you restart switch back to airplane off reboot (same as above) it worked for me when I was having issues don't know if its related I'm on sprint rhod400

Sent from my Touch Pro 2 using Tapatalk

What do you mean "airplane mode doesn't actually switch until you restart"? Airplane mode goes in effect immediately here.

**[ACL]** · #9 (**permalink**) 12-14-2011, 07:02 PM

Quote:

Originally Posted by vzihome

Try switching into airplane then reboot(when switching to airplane mode it doesn't actually switch until you restart) then after you restart switch back to airplane off reboot (same as above) it worked for me when I was having issues don't know if its related I'm on sprint rhod400

Sent from my Touch Pro 2 using Tapatalk

Thats not correct behavior. On normal usage when going to airplane mode if you look at the radio logs you should see it go immediately to airplane mode. If yours is only doing that on reboot, means there is something stuck on the radio and wont happen until the radio restarts.

I know you have some mods on your own build prop, so try to trace back and see what setting may have caused this. On the 400, im able to switch to airplane with no issues.

If you need a hint of what may be causing it, keep your eye on the radio log as you are switching it. It may show you there whats going on.

vzihome · #10 (**permalink**) 12-14-2011, 06:50 PM

Quote:

Originally Posted by arrrghhh

What do you mean "airplane mode doesn't actually switch until you restart"? Airplane mode goes in effect immediately here.

Guess its only on my phone only but icons still show service but can't actually use it and airplane mode option greyed out need to reboot

Sent from my Touch Pro 2 using Tapatalk