NAND Testing - 05-25 Update: New LK, Recovery.img, Kernel Updates through Recovery

[MassStash]

please help, can't get power button to work again, and end hold only has power off. what causes the only power off in hold end buttong menu?

update: up and running again with:
29th 3d drivers
1232 kernel i believe (build number in phone 3.29.651.5 (autobuild #37)) and everything is running awesome cept no wifi. panels pretty nice too

[[ACL]]

Nate and all my other core haret dumpers.. I need some haret info.

Can you dump physical address 0x00081034 and see what values you get.

12-13 : Sharp
1 : Auo
5 : Hitachi
7 : EID
19 : AUO
20: EID

[mpannen]

Hi:

I ran this command:

pdump 0x00081034 1 b

and it came back with a result of 00000014


And for those of you not at a computer, you can turn on the haret console and connect to it using Putty for Windows Mobile. Just telnet to 127.0.0.1 port 9999, and press enter once connected. You will then see the console.

[[ACL]]

Originally Posted by mpannen

Hi:

I ran this command:

pdump 0x00081034 1 b

and it came back with a result of 00000014


And for those of you not at a computer, you can turn on the haret console and connect to it using Putty for Windows Mobile. Just telnet to 127.0.0.1 port 9999, and press enter once connected. You will then see the console.

This means you have the same panel i do. So i'm baffled why you were getting display errors before. I'll look into it tho so next release should detect properly. I'm waiting to see if anyone has anything besides 0x14

[natemcnutty]

Originally Posted by [ACL]

This means you have the same panel i do. So i'm baffled why you were getting display errors before. I'll look into it tho so next release should detect properly. I'm waiting to see if anyone has anything besides 0x14

Unfortunately, I also have 0x14 on that paddress. Did you disassemble a wince driver for that address?

HaRET(12)# pdump 0x00081034 128
00081034 | 00000014 efffffff fff7ffdf ffffbfff | ................
00081044 | fffefffb fffffdff ffffffff fffdffff | ................
00081054 | ffffff7f 00000000 52455354 55aaaa55 | ........TSERU..U
00081064 | 58899885 00480052 0044004f 00300035 | ...XR.H.O.D.5.0.
00081074 | 00300030 00000030 ffffffff ffffffff | 0.0.0...........
00081084 | ffffffff 5349424b 52454749 ffffffff | ....KBISIGER....
00081094 | ffffffff 3fffff00 fdfffffd ffffbfff | .......?........
000810a4 | 00000000 4e534543 00001000 00000080 | ....CESN........

[mpannen]

Could different radio firmwares have any influence? I have a Verizon 2.37 on my device..What do you have on yours ACL?

[mpannen]

ACL:

You are not going to believe this, but I flashed back to Sprint radio 2.32 from VZW 2.37 and the display is working for me now. I am using the autobuild from 12/15/2010, which had previously failed for me.

[mpannen]

If it helps, I tried the kernel from the 14th and the one following the changes you committed from the 18th, and neither of those worked as well (actually, not really at all) as the one from the 15th of December.

[[ACL]]

Originally Posted by mpannen

If it helps, I tried the kernel from the 14th and the one following the changes you committed from the 18th, and neither of those worked as well (actually, not really at all) as the one from the 15th of December.

found some bugs on the micrp code that need to be fixed. So i'm waiting for our topaz brethren to get on that so we can continue with the panel. Patience only way things get done.

[docnas]

um qucik question would sprint TEP cover me if i brick my device? thing is im getting that damn oily sheen on my screen ( anyone who had a TP will remember that thing) so was thinking of going in to the store to try for an exchange/repair anyway so if bricking it by messing up the nand wont void the warranty/tep i could give it a try