How the do you hard reset this phone (CDMA VZW)

[abuttino]

I have run through EVERY technique on the internet, there is nothing that seems to work..

Not only this, the HardSPL won't see the phone as sync'd on Activesync.

[Mr. X]

i made your thread title a lil more appropriate and with in the forum rules.

[abuttino]

I am really beginng to hate this phone and I don't even own one for myself

[Boo Boo]

start - settings - system - clear storage

and you need to install the correct active sync or mobile sync

[abuttino]

oh ya. That's what I was missing... NOT.. Sorry, I am an 3 hours into this crap and I am not happy

I am lost on why the hardspl will absolutely will not work. It says that the ActiveSync is not connected, but it is.

Isn't there a way to do it manually?

[Holyman007]

For my telus tp2, to hard reset, you need to to hold: volume down, send key, end (power) key, and the reset button.

It's the same for verizon.

Are you using activesync on windows XP?
Windows vista and 7 use Windows Mobile Device Center.
Make sure you select Activesync mode when you connect it.

If that fails, put it in bootloader mode (Tri-color screen) by holding the volume down key while turning it on and then connect it to the PC then run the Hard-SPL.

[abuttino]

Didn't work

[Boo Boo]

clear the storage, or i guess you bricked it

[razorloves]

Here is a link to the vzw tp2 manual. http://member.america.htc.com/downlo...nualforVzW.pdf
look on pg 146 for instructions on hard reseting.
i will copy and paste for you.

To perform a hard reset
1. With the device turned off, press and hold the VOLUME DOWN, TALK/SEND, and END/POWER buttons until you see this message on the screen.
Wiping user data/settings & any user installed applications...
1. Press Vol UP to restore manuafacturer default.
2. Press Vol Down to restore custom configuration.
3. Press other keys to cancel.
2. Release the VOLUME DOWN, TALK/SEND, and END/POWER buttons.
3. Press the VOLUME UP button to restore the operating system to the factory default configuration, press the VOLUME DOWN button to restore the factory default configuration and remove any operator customization, or press any other button to cancel the reset.
Using Clear Storage
If you can access the device settings, you can use Clear Storage to reset your device back to factory default settings.
1. Tap Start > Settings, and then tap All Settings.

2. On the System tab, tap Memory > Clear Storage tab.
3. Enter “1234”, tap OK and then tap Yes to confirm.

[Pegasus"143"]

Originally Posted by abuttino

I have run through EVERY technique on the internet, there is nothing that seems to work..

Not only this, the HardSPL won't see the phone as sync'd on Activesync.

Right out of the VZW manual.

146 Managing Your Device
To perform a hard reset
With the device turned off, press and hold the VOLUME DOWN, TALK/SEND, and END/POWER buttons
until you see this message on the screen.
Wainpy inugs eru sienrs tdaaltlae/ds ettings & applications...
1. Pmarensufs aVcotluUrPe r tdo efraesultot.re
2. Pcruesstos m VcoloDnfoiwgn urtao tireons.tore
3. Pcarencses l.other keys to
Release the VOLUME DOWN, TALK/SEND, and END/POWER buttons.
Press the VOLUME UP button to restore the operating system to the factory default configuration,
press the VOLUME DOWN button to restore the factory default configuration and remove any operator
customization, or press any other button to cancel the reset.
Using Clear Storage
If you can access the device settings, you can use Clear Storage to reset your device back to factory default
settings.
Tap Start > Settings, and then tap All Settings.
On the System tab, tap Memory > Clear Storage tab.
Enter “1234”, tap OK and then tap Yes to confirm.