[12-15-09]Android CDMA TouchPro: TEXT, TALK, data and wifi(RAPH800) Ported!!!

[Cobaltikus]

Originally Posted by m4f1050

Eh... That's what we said... haha

Who said I needed a new card? I must have missed that one.

But seriously, thank you everyone for your help. I wouldn't have known I needed a new card without your help in eliminating all the other possibilities.

[m4f1050]

I thought you formatted it FAT32 and 4096... I missed the part that you used another one. (was reading through fast and saw the fat32 & 4096 and that it worked afterwards... my bad)

[coolsac32]

i have a raph800 sprint touch pro and i am tryinng to load andriod from 6-22. i used the config tool to modify it. when i start the loading. it goes through the whole scrolling numbers and letters thing then it stays at the android logo screen. am i doing something wrong?

[Cobaltikus]

Originally Posted by coolsac32

i have a raph800 sprint touch pro and i am tryinng to load andriod from 6-22. i used the config tool to modify it. when i start the loading. it goes through the whole scrolling numbers and letters thing then it stays at the android logo screen. am i doing something wrong?

attach your default.txt file and I will look at it and make sure that is not the problem. It could also be that you are accidentally using the android files specific to the raph100. It could also be that you have a microSD card that is incompatible with the current android builds (that was my issue). There may be other reasons, but these seem to be the most common so let's eliminate those possibilities first.

[coolsac32]

Originally Posted by Cobaltikus

attach your default.txt file and I will look at it and make sure that is not the problem. It could also be that you are accidentally using the android files specific to the raph100. It could also be that you have a microSD card that is incompatible with the current android builds (that was my issue). There may be other reasons, but these seem to be the most common so let's eliminate those possibilities first.

ok here it is

[Cobaltikus]

Originally Posted by coolsac32

ok here it is

Yep - that was the problem!

the default.txt file that you attached is NOT the one for the Sprint Touch Pro.

1. Open it up in a text editor
2. Delete everthing in it
3. Copy and paste the following in it and save it

set mtype 2039
set kernel zImage
set initrd root.cpiogz
set ramsize 0x6000000
set ramaddr 0x10000000
set cmdline "root=/dev/ram0 init=/init console=tty0 mem=76M msmsdcc_id=3 imgdevname=/dev/mmcblk0p1 imgdevnum=1 imgdir=/tmp msmts_calib=0x81.0x393.0x358.0x7D msmvkeyb_toggle=hide"
boot

4. Try again and post your results
5. Click "Thanks"

[Cobaltikus]

Beta packages released for both Diamond and Touch Pro

NEW!!! Release on Labor Day, 2009-09-07



http://connect-utb.com/index.php?opt...touch-pro-beta

For Sprint Touch Pro owers - use this startup.txt (previously default.txt)

set ramsize 0x6000000
set ramaddr 0x10000000
set mtype 2039
set KERNEL zImage
set initrd initrd.gz
set cmdline "root=/dev/ram0 init=/ console=tty0 mem=76M msmsdcc_id=3 zmgdevname=/dev/mmcblk0p1 imgdevnum=1 imgdir=/ msmts_calib=0x81.0x393.0x358.0x7D clock-7x00.a11=500 msmvkeyb_toggle=off"
boot

[neilson]

Ok, so with the Sprint HTC Hero launching in a month, anybody want to start predicting when a ROM and Radio will become available on here so that the rest of us that are running Android as a toy on our TPs and TDs can make/recieve calls and access the internet using just Android?

[violentz313]

Does anyone have a diamond startup.txt with internet settings set up for verizon?

[sevensicks]

Originally Posted by Cobaltikus

[b]Beta packages released for both Diamond and Touch Pro

This is for GSM phones.